Effects of Photosensitive Film Sidewall Profile with Different Exposure Wavelength and Process Characteristics of Plating Bump Technology

2006 ◽  
Author(s):  
Jui-I Yu ◽  
R. Yu ◽  
T. Tai ◽  
D. Huang ◽  
W. Jau ◽  
...  
Keyword(s):  
Process Characteristics ◽  
Photosensitive Film

Non-stationary process characteristics of the gas outflow into a liquid

2019 ◽  
Vol 14 (2) ◽  
pp. 82-88
Author(s):  
M.V. Alekseev ◽  
I.S. Vozhakov ◽  
S.I. Lezhnin
Keyword(s):  
Numerical Simulation ◽  
Liquid Column ◽  
Gas Content ◽  
Liquid Lead ◽  
Gas Flows ◽  
Asymptotic Model ◽  
Process Characteristics ◽  
Significant Difference ◽  
Order Of Magnitude ◽  
Volume Method

A numerical simulation of the process of the outflow of gas under pressure into a closed container partially filled with liquid was carried out. For comparative theoretical analysis, an asymptotic model was used with assumptions about the adiabaticity of the gas outflow process and the ideality of the liquid during the oscillatory one-dimensional motion of the liquid column. In this case, the motion of the liquid column and the evolution of pressure in the gas are determined by the equation of dynamics and the balance of enthalpy. Numerical simulation was performed in the OpenFOAM package using the fluid volume method (VOF method) and the standard k-e turbulence model. The evolution of the fields of volumetric gas content, velocity, and pressure during the flow of gas from the high-pressure chamber into a closed channel filled with liquid in the presence of a ”gas blanket“ at the upper end of the channel is obtained. It was shown that the dynamics of pulsations in the gas cavity that occurs when the gas flows into the closed region substantially depends on the physical properties of the liquid in the volume, especially the density. Numerical modeling showed that the injection of gas into water occurs in the form of a jet outflow of gas, and for the outflow into liquid lead, a gas slug is formed at the bottom of the channel. Satisfactory agreement was obtained between the numerical calculation and the calculation according to the asymptotic model for pressure pulsations in a gas projectile in liquid lead. For water, the results of calculations using the asymptotic model give a significant difference from the results of numerical calculations. In all cases, the velocity of the medium obtained by numerical simulation and when using the asymptotic model differ by an order of magnitude or more.

Process characteristics of screw impellers with a draught tube for Newtonian liquids. Time of homogenization

1981 ◽  
Vol 46 (9) ◽  
pp. 2032-2042 ◽  
Author(s):  
Pavel Seichter
Keyword(s):  
Flow Regime ◽  
Creeping Flow ◽  
Energy Requirements ◽  
Dimensionless Time ◽  
Mixing Times ◽  
Conductivity Method ◽  
Draught Tube ◽  
Process Characteristics ◽  
Newtonian Liquids

A conductivity method has been used to assess the homogenization efficiency of screw impellers with draught tubes. The value of the criterion of homochronousness, i.e. the dimensionless time of homogenization, in the creeping flow regime of Newtonian liquids is dependent on the geometrical simplexes of the mixing system. In particular, on the ratio of diameters of the vessel and the impeller and on the ratio of the screw lead to the impeller diameter. Expression have been proposed to calculate the mixing times. Efficiency has been examined of individual configurations of screw impellers. The lowest energy requirements for homogenization have been found for the system with the ratio D/d = 2.

Process characteristics of screw impellers with a draught tube for Newtonian liquids. Pumping capacity of the impeller

1981 ◽  
Vol 46 (9) ◽  
pp. 2021-2031 ◽  
Author(s):  
Pavel Seichter
Keyword(s):  
Viscous Liquid ◽  
Energy Criterion ◽  
Velocity Profiles ◽  
Newtonian Liquid ◽  
Creeping Flow ◽  
Geometrical Arrangement ◽  
Draught Tube ◽  
Process Characteristics ◽  
Newtonian Liquids

Velocity profiles and pumping capacity have been determined using a thermistor anemometer in a vessel equipped with a screw impeller. In region of the creeping flow of a Newtonian liquid, i.e. for Re <15, the dimensionless pumping capacity is dependent on the geometrical arrangement of the mixing system. The efficiency was assessed of individual configuration from the value energy criterion expressing the dimensionless power requirements for recirculation of a highly viscous liquid in a vessel equipped with a screw impeller.

scholarly journals Enabling Knowledge Sharing within e-Government Back-Office through Ontological Engineering

2007 ◽  
Vol 2 (1) ◽  
pp. 33-48
Author(s):  
Graciela Brusa ◽  
María Laura Caliusco ◽  
Omar Chiotti
Keyword(s):  
Organizational Innovation ◽  
Santa Fe ◽  
Ontological Engineering ◽  
The Public ◽  
Software Applications ◽  
Process Characteristics ◽  
Main Requirement ◽  
The Government ◽  
Back Office

Nowadays, organizational innovation constitutes the government challenges for providing better and more efficient services to citizens, enterprises or other public offices. E–government seems to be an excellent opportunity to work on this way. The applications that support front-end services delivered to users have to access information systems of multiple government areas. This is a significant problem for e-government back-office since multiple platforms and technologies coexist. Moreover, in the back-office there is a great volume of data that is implicit in the software applications that support administration activities. In this context, the main requirement is to make available the data managed in the back-office for the e-government users in a fast and precise way, without misunderstanding. To this aim, it is necessary to provide an infrastructure that make explicit the knowledge stored in different government areas and deliver this knowledge to the users. This paper presents an approach on how ontological engineering techniques can be applied to solving the problems of content discovery, aggregation, and sharing in the e-government back-office. This approach is constituted by a specific process to develop an ontology in the public sector and an ontology-based architecture. In order to present the process characteristics, a case study applied to a local government domain is analyzed. This domain is the budget and financial information of Santa Fe Province (Argentine).

Monitoring and modelling an industrial trickling filter using on-line off-gas analysis and respirometry

2000 ◽  
Vol 41 (12) ◽  
pp. 139-148 ◽  
Author(s):  
H. Vanhooren ◽  
D. Demey ◽  
I. Vannijvel ◽  
P. A. Vanrolleghem
Keyword(s):  
Phase Equilibrium ◽  
Model Calibration ◽  
Inorganic Carbon ◽  
Diffusion Constant ◽  
Gas Analysis ◽  
Trickling Filter ◽  
Process Characteristics ◽  
Substrate Diffusion ◽  
On Line ◽  
Ph Dependent

The process characteristics of an industrial scale trickling filter plant were quantified by means of a five day intensive measurement campaign with the use of on-line respirometry and on-line off-gas analysis. Respirometry was used to measure the readily biodegradable CODst and the off-gas sensor was used to monitor the O2 and CO2 content of the off-gases. To model the biodegradation in the filters, the model developed by Rauch et al. (1999) was used. It is based on the decoupling of two basic processes in biofilm systems, substrate diffusion and biodegradation. This model was extended with equations for the production and the pH-dependent liquid-phase equilibrium for inorganic carbon (IC). The measured effluent and off-gas concentrations could be followed very closely by the calibrated model. O2 and CO2 measurements revealed that the system was not always oxygen limited. The model calibration thus required the use of a very low value of the diffusion constant for readily biodegradable substrate.

Tangxian Jidong Cement Co., Ltd. SNCR DeNOx Engineering Practice

2013 ◽  
Vol 726-731 ◽  
pp. 2342-2346 ◽  
Author(s):  
Shao Hua Ling ◽  
Chang Yong Jing ◽  
Jing Ma ◽  
Li Juan Zhang
Keyword(s):  
Flue Gas ◽  
Reducing Agent ◽  
Engineering Practice ◽  
System Configuration ◽  
Process Characteristics ◽  
Detailed Explanation ◽  
Actual Operating ◽  
Ammonia Slip ◽  
Flue Gas Denitrification

Tang xian in Hebei Jidong Cement Co., Ltd. flue gas denitrification treatment works, the project uses ammonia as a reducing agent SNCR DeNOx technology. A detailed explanation of the the SNCR process characteristics and system configuration, The analysis for actual operating results of the engineering. The results show: After treatment NOx concentration is less than 200 mg/Nm3, Denitrification efficiency reach 72.82%, Ammonia slip less than 0.9mg/Nm3, Engineering put into operation, About a year reduces emission NOx 1430 tons.

Sign in / Sign up

Export Citation Format

Share Document