Drop Impact Analysis of Sn-Ag-Cu Solder Joints using Dynamic High-Strain Rate Plastic Strain as the Impact Damage Driving Force

2006 ◽  
Author(s):  
J.H.L. Pang ◽  
F.X. Che
Keyword(s):  
Plastic Strain ◽  
High Strain Rate ◽  
Strain Rate ◽  
Driving Force ◽  
Impact Analysis ◽  
Solder Joints ◽  
High Strain ◽  
Impact Damage ◽  
Drop Impact ◽  
The Impact

scholarly journals 2-Step Drop Impact Analysis of a Miniature Mobile Haptic Actuator Considering High Strain Rate and Damping Effects

Micromachines ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 272 ◽  
Author(s):  
Choi ◽  
Choi ◽  
Kang ◽  
Jeon ◽  
Lee
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
Impact Analysis ◽  
High Strain ◽  
Drop Impact ◽  
Tactile Feedback ◽  
Smart Device ◽  
Damping Effects ◽  
Impact Characteristics ◽  
The Impact

In recent times, the haptic actuators have been providing users with tactile feedback via vibration for a realistic experience. The vibration spring must be designed thin and small to use a haptic actuator in a smart device. Therefore, considerable interests have been exhibited with respect to the impact characteristics of these springs. However, these springs have been difficult to analyze due to their small size. In this study, drop impact experiments and analyses were performed to examine the damages of the mechanical spring in a miniature haptic actuator. Finally, an analytical model with high strain rate and damping effects was constructed to analyze the impact characteristics.

Strain Rate Effects and Rate-Dependent Constitutive Models of Lead-Based and Lead-Free Solders

2009 ◽  
Vol 77 (1) ◽  
Author(s):  
Fei Qin ◽  
Tong An ◽  
Na Chen
Keyword(s):  
Strain Rate ◽  
Impact Analysis ◽  
Solder Joints ◽  
High Strain ◽  
Drop Impact ◽  
Lead Free ◽  
Strain Rates ◽  
High Strain Rates ◽  
Rate Dependent ◽  
Lead Free Solders

As traditional lead-based solders are banned and replaced by lead-free solders, the drop impact reliability is becoming increasingly crucial because there is little understanding of mechanical behaviors of these lead-free solders at high strain rates. In this paper, mechanical properties of one lead-based solder, Sn37Pb, and two lead-free solders, Sn3.5Ag and Sn3.0Ag0.5Cu, were investigated at strain rates that ranged from 600 s−1 to 2200 s−1 by the split Hopkinson pressure and tensile bar technique. At high strain rates, tensile strengths of lead-free solders are about 1.5 times greater than that of the Sn37Pb solder, and also their ductility are significantly greater than that of the Sn37Pb. Based on the experimental data, strain rate dependent Johnson–Cook models for the three solders were derived and employed to predict behaviors of solder joints in a board level electronic package subjected to standard drop impact load. Results indicate that for the drop impact analysis of lead-free solder joints, the strain rate effect must be considered and rate-dependent material models of lead-free solders are indispensable.

scholarly journals Carbon Nanotube Peapods Under High-Strain Rate Conditions: A Molecular Dynamics Investigation

MRS Advances ◽  
2020 ◽  
Vol 5 (33-34) ◽  
pp. 1723-1730
Author(s):  
J. M. De Sousa ◽  
C. F. Woellner ◽  
L. D. Machado ◽  
P. A. S. Autreto ◽  
D. S. Galvao
Keyword(s):  
Molecular Dynamics ◽  
Carbon Nanotube ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Optical Modulation ◽  
Carbon Structures ◽  
Dynamics Simulations ◽  
Forms Of Carbon ◽  
The Impact

ABSTRACTNew forms of carbon-based materials have received great attention, and the developed materials have found many applications in nanotechnology. Interesting novel carbon structures include the carbon peapods, which are comprised of fullerenes encapsulated within carbon nanotubes. Peapod-like nanostructures have been successfully synthesized, and have been used in optical modulation devices, transistors, solar cells, and in other devices. However, the mechanical properties of these structures are not completely elucidated. In this work, we investigated, using fully atomistic molecular dynamics simulations, the deformation of carbon peapods under high-strain rate conditions, which are achieved by shooting the peapods at ultrasonic velocities against a rigid substrate. Our results show that carbon peapods experience large deformation at impact, and undergo multiple fracture pathways, depending primarily on the relative orientation between the peapod and the substrate, and the impact velocity. Observed outcomes include fullerene ejection, carbon nanotube fracture, fullerene, and nanotube coalescence, as well as the formation of amorphous carbon structures.

scholarly journals Effect of Stress-Relieving Heat Treatment on the High Strain Rate Dynamic Compressive Properties of Additively Manufactured Ti6Al4V (ELI)

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 653
Author(s):  
Amos Muiruri ◽  
Maina Maringa ◽  
Willie du Preez ◽  
Leonard Masu
Keyword(s):  
Plastic Strain ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Deformation Behaviour ◽  
Test System ◽  
Strain Rates ◽  
Stress Relieving ◽  
Strain Rate Compression

A study was undertaken on the compressive high strain rate properties and deformation behaviour of Direct Metal Laser-Sintered (DMLS) Ti6Al4V (ELI) parts in two separate forms: as-built (AB) and stress relieved (SR). The high strain rate compression tests were carried out using a Split Hopkinson Pressure Bar test system at ambient temperature. The average plastic strain rates attained by the system were 400 s−1 and 700 s−1. Comparative analyses of the performance (flow stresses and fracture strains) of AB and SR specimens were carried out based on the results obtained at these two plastic strain rates. Microstructural analyses were performed to study the failure mechanisms of the deformed specimens and fracture surfaces. Vickers microhardness test values were obtained before and after high strain rate compression testing. The results obtained in both cases showed the strain rate sensitivity of the stress-relieved samples to be higher in comparison to those of as-built ones, at the same value of true strain.

Performance of 3-D Printed Thermoplastic Polyurethane Under Quasi-Static and High-Strain Rate Loading

2016 ◽  
Author(s):  
S. Chaudhry ◽  
M. Al-Dojayli ◽  
A. Czekanski
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Kolsky Bar ◽  
Pulse Shaper ◽  
Input And Output ◽  
The Impact ◽  
Printing Direction ◽  
Printing Parameters

As 3-D printed materials are being embraced by the manufacturing industries, understanding the response mechanism to high strain rate events becomes a concern to meet requirements for a specific application. In order to improve the mechanical performance of a 3-D printed part, it is necessary to quantify the impact of various printing parameters on the mechanical properties. Initial studies have shown that a difference in 3-D printed material is expected due to the effect of manufacturing parameters such as anisotropy relating to printing direction, infill pattern, infill percentage, layer height and orientation of the part being printed. The main focus of the study is to characterize the effect of the previously mentioned printing parameters under quasi-static and high strain rate (100–1000 /s). In this strain rate regime, the most common apparatus used is the Split Hopkinson pressure bar (also known as Kolsky bar). It consists of a cylindrical metallic bar that has a striker, input and output bar. While the specimen is fixated between the input and output bar, the striker bar is accelerated and triggers the incident bar. As a result, an elastic wave is generated which travels towards the specimen/input bar interface, where some part of it is reflected and the rest is transmitted. The Kolsky bar is adjusted by using a hollow transmitter tube and pulse shaper. Due to an impedance mismatch between the samples and bar material, the amplitude of the transmitted pulse is low. Using a hollow transmitter bar increases this amplitude due to area mismatch between the specimen and tube. Using a pulse shaper between the striker and input bar, the rise time of the elastic compressive wave increases and assists in achieving a constant rate of loading. The compressive stress strain curves were obtained under high strain rates to determine the strain rate effect. To measure the response under static testing conditions, a commercial load frame was used. A comprehensive comparison of dynamic compressive response of samples was performed to characterize the effect of printing parameters.

scholarly journals Comparative Study of the Dynamic Deformation of Pure Molybdenum at High Strain Rates and High Temperatures

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4847
Author(s):  
Shuai Chen ◽  
Wen-Bin Li ◽  
Xiao-Ming Wang ◽  
Wen-Jin Yao ◽  
Jiu-Peng Song ◽  
...  
Keyword(s):  
High Temperature ◽  
High Strain Rate ◽  
Strain Rate ◽  
Strain Hardening ◽  
High Purity ◽  
High Strain ◽  
Combined Effect ◽  
Strengthening Effect ◽  
Plastic Properties ◽  
The Impact

To study the dynamic plastic properties of high-purity molybdenum materials at high temperature and high strain rate, we designed tests to compare the mechanical behaviour of two high-purity molybdenum materials with different purities and two with different processing deformation conditions under dynamic impact compression in the temperature range of 297–1273 K. We analysed the molybdenum materials’ sensitivities to the strain-hardening effect, strain rate-strengthening effect, and temperature-softening effect as well as the comprehensive response to the combined effect of the strain rate and temperature, the adiabatic impact process, and the microstructure at high temperature and high strain rate. Furthermore, based on a modified Johnson–Cook constitutive model, we quantitatively analysed the flow stresses in these materials. The calculation results strongly agree with the test results. Our findings indicate that the high-purity molybdenum materials show consistent sensitivity to the combined effect of strain rate and temperature regarding the dynamic plastic properties. The materials with higher purity are less sensitive to the combined effect of the strain rate and temperature, and those with less processing deformation experience more pronounced strain-hardening effects. Under high strain rate at room temperature, these materials are highly susceptible to impact embrittlement and decreases in dynamic plastic properties due to intergranular fracture in the internal microstructure. However, increasing the impact environment temperature can significantly improve their plastic properties. The higher the temperature, the better the plastic properties and the higher the impact toughness.

Dynamic Characterization of Multi-Functional Sandwich Composites

2000 ◽  
Author(s):  
Uday K. Vaidya ◽  
Scott P. Nelson ◽  
Biju Mathew ◽  
Renee M. Rodgers ◽  
Mahesh V. Hosur
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Abstract This paper deals with an innovative integrated hollow (space) E-glass/epoxy core sandwich composite construction that possesses several multi-functional benefits in addition to the providing light-weight and bending stiffness advantages. In comparison to traditional foam and honeycomb cores, the integrated space core provides a means to route wires/rods, embed electronic assemblies, and store fuel and fire-retardant foam, among other conceivable benefits. In the current work the low velocity impact (LVI) response of innovative integrated sandwich core composites was investigated. Three thickness of integrated and functionality-embedded E-glass/epoxy sandwich cores were considered in this study — including 6mm, 9mm and 17 mm. The low-velocity impact results indicated that the hollow and functionality embedded integrated core suffered a localized damage state limited to a system of core members in the vicinity of the impact. Stacking of the core was an effective way of improving functionality and limiting the LVI damage in the sandwich plate. The functionality-embedded cores provided enhanced LVI resistance due to energy additional energy absorption mechanisms. The high strain rate (HSR) impact behavior of these sandwich constructions is also studied using a Split Hopkinson Pressure Bar (SHPB) at strain rates ranging from 163 to 653 per second. The damage initiation, progression and failure mechanisms under low velocity and high strain rate impact are investigated through optical and scanning electron microscopy.

Sign in / Sign up

Export Citation Format

Share Document