Understanding tire/road stick-slip interactions with embedded rubber force sensors

2012 ◽  
Author(s):  
Yizhai Zhang ◽  
Austin W. Allen ◽  
Jingang Yi ◽  
Tao Liu
Keyword(s):  
Force Sensors ◽  
Stick Slip

Diagnostic System of Gravitational Solid Flow Based on Weight and Accelerometer Signal Analysis Using Wireless Data Transmission Technology

2012 ◽  
Vol 17 (4) ◽  
pp. 319-326 ◽  
Author(s):  
Zbigniew Chaniecki ◽  
Krzysztof Grudzień ◽  
Tomasz Jaworski ◽  
Grzegorz Rybak ◽  
Andrzej Romanowski ◽  
...  
Keyword(s):  
Signal Analysis ◽  
Scale Up ◽  
Three Dimensional ◽  
Diagnostic System ◽  
Wireless Data ◽  
Stick Slip ◽  
Wireless Data Transmission ◽  
Accelerometer Signal ◽  
Flow Investigation ◽  
Material Information

Abstract The paper presents results of the scale-up silo flow investigation in based on accelerometer signal analysis and Wi-Fi transmission, performed in distributed laboratory environment. Prepared, by the authors, a set of 8 accelerometers allows to measure a three-dimensional acceleration vector. The accelerometers were located outside silo, on its perimeter. The accelerometers signal changes allowed to analyze dynamic behavior of solid (vibrations/pulsations) at silo wall during discharging process. These dynamic effects are caused by stick-slip friction between the wall and the granular material. Information about the material pulsations and vibrations is crucial for monitoring the interaction between silo construction and particle during flow. Additionally such spatial position of accelerometers sensor allowed to collect information about nonsymmetrical flow inside silo.

scholarly journals Effect of Pressure Distribution on the Energy Dissipation of Lap Joints under Equal Pre-tension Force

Open Physics ◽  
2019 ◽  
Vol 17 (1) ◽  
pp. 320-328
Author(s):  
Delin Sun ◽  
Minggao Zhu
Keyword(s):  
Energy Dissipation ◽  
Pressure Distribution ◽  
Theoretical Basis ◽  
Lap Joints ◽  
Power Exponent ◽  
Lap Joint ◽  
Stick Slip ◽  
Pressure Distributions ◽  
Hysteretic Characteristics ◽  
Effective Use

Abstract In this paper, the energy dissipation in a bolted lap joint is studied using a continuum microslip model. Five contact pressure distributions compliant with the power law are considered, and all of them have equal pretension forces. The effects of different pressure distributions on the interface stick-slip transitions and hysteretic characteristics are presented. The calculation formulation of the energy dissipation is introduced. The energy dissipation results are plotted on linear and log-log coordinates to investigate the effect of the pressure distribution on the energy distribution. It is shown that the energy dissipations of the lap joints are related to the minimum pressure in the overlapped area, the size of the contact area and the value of the power exponent. The work provides a theoretical basis for further effective use of the joint energy dissipation.

scholarly journals Design, Analysis, and Experiment on a Novel Stick-Slip Piezoelectric Actuator with a Lever Mechanism

Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 863 ◽  
Author(s):  
Weiqing Huang ◽  
Mengxin Sun
Keyword(s):  
Piezoelectric Actuator ◽  
Simple Structure ◽  
Fast Response ◽  
Displacement Sensor ◽  
Design Parameters ◽  
The Finite Element Method ◽  
Stick Slip ◽  
Lever Mechanism ◽  
Series Of Experiments ◽  
Stator Design

A piezoelectric actuator using a lever mechanism is designed, fabricated, and tested with the aim of accomplishing long-travel precision linear driving based on the stick-slip principle. The proposed actuator mainly consists of a stator, an adjustment mechanism, a preload mechanism, a base, and a linear guide. The stator design, comprising a piezoelectric stack and a lever mechanism with a long hinge used to increase the displacement of the driving foot, is described. A simplified model of the stator is created. Its design parameters are determined by an analytical model and confirmed using the finite element method. In a series of experiments, a laser displacement sensor is employed to measure the displacement responses of the actuator under the application of different driving signals. The experiment results demonstrate that the velocity of the actuator rises from 0.05 mm/s to 1.8 mm/s with the frequency increasing from 30 Hz to 150 Hz and the voltage increasing from 30 V to 150 V. It is shown that the minimum step distance of the actuator is 0.875 μm. The proposed actuator features large stroke, a simple structure, fast response, and high resolution.

scholarly journals A model of processive walking and slipping of kinesin-8 molecular motors

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ping Xie
Keyword(s):  
Single Molecule ◽  
Molecular Motors ◽  
External Load ◽  
Molecular Motor ◽  
Velocity Versus ◽  
Stick Slip ◽  
Load Dependence ◽  
Chemomechanical Coupling ◽  
Similarities And Differences ◽  
Stick Slip Motion

AbstractKinesin-8 molecular motor can move with superprocessivity on microtubules towards the plus end by hydrolyzing ATP molecules, depolymerizing microtubules. The available single molecule data for yeast kinesin-8 (Kip3) motor showed that its superprocessive movement is frequently interrupted by brief stick–slip motion. Here, a model is presented for the chemomechanical coupling of the kinesin-8 motor. On the basis of the model, the dynamics of Kip3 motor is studied analytically. The analytical results reproduce quantitatively the available single molecule data on velocity without including the slip and that with including the slip versus external load at saturating ATP as well as slipping velocity versus external load at saturating ADP and no ATP. Predicted results on load dependence of stepping ratio at saturating ATP and load dependence of velocity at non-saturating ATP are provided. Similarities and differences between dynamics of kinesin-8 and that of kinesin-1 are discussed.

scholarly journals Kinematics and dynamics analysis of new rotary-percussive PDM drilling tool

2021 ◽  
pp. 146134842198915
Author(s):  
Jialin Tian ◽  
Xuehua Hu ◽  
Liming Dai ◽  
Lin Yang ◽  
Yi Yang ◽  
...  
Keyword(s):  
Drill String ◽  
Structure Design ◽  
Drilling Process ◽  
Analysis Model ◽  
Drilling Tool ◽  
Stick Slip ◽  
Rate Of Penetration ◽  
Bottom Hole ◽  
Bottom Hole Assembly ◽  
The Impact

This paper presents a new drilling tool with multidirectional and controllable vibrations for enhancing the drilling rate of penetration and reducing the wellbore friction in complex well structure. Based on the structure design, the working mechanism is analyzed in downhole conditions. Then, combined with the impact theory and the drilling process, the theoretical models including the various impact forces are established. Also, to study the downhole performance, the bottom hole assembly dynamics characteristics in new condition are discussed. Moreover, to study the influence of key parameters on the impact force, the parabolic effect of the tool and the rebound of the drill string were considered, and the kinematics and mechanical properties of the new tool under working conditions were calculated. For the importance of the roller as a vibration generator, the displacement trajectory of the roller under different rotating speed and weight on bit was compared and analyzed. The reliable and accuracy of the theoretical model were verified by comparing the calculation results and experimental test results. The results show that the new design can produce a continuous and stable periodic impact. By adjusting the design parameter matching to the working condition, the bottom hole assembly with the new tool can improve the rate of penetration and reduce the wellbore friction or drilling stick-slip with benign vibration. The analysis model can also be used for a similar method or design just by changing the relative parameters. The research and results can provide references for enhancing drilling efficiency and safe production.

Sign in / Sign up

Export Citation Format

Share Document