scholarly journals Mode-locked multichromatic x rays in a seeded free-electron laser for single-shot x-ray spectroscopy

2012 ◽  
Vol 15 (5) ◽  
Author(s):  
Dao Xiang ◽  
Yuantao Ding ◽  
Tor Raubenheimer ◽  
Juhao Wu
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Single Shot ◽  
X Rays ◽  
X Ray

scholarly journals Erratum: Single Shot Coherence Properties of the Free-Electron Laser SACLA in the Hard X-ray Regime

2014 ◽  
Vol 4 (1) ◽  
Author(s):  
Felix Lehmkühler ◽  
Christian Gutt ◽  
Birgit Fischer ◽  
Martin A. Schroer ◽  
Marcin Sikorski ◽  
...  
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Single Shot ◽  
X Ray

scholarly journals Nanofocusing Optics for an X-Ray Free-Electron Laser Generating an Extreme Intensity of 100 EW/cm2 Using Total Reflection Mirrors

2020 ◽  
Vol 10 (7) ◽  
pp. 2611
Author(s):  
Hirokatsu Yumoto ◽  
Yuichi Inubushi ◽  
Taito Osaka ◽  
Ichiro Inoue ◽  
Takahisa Koyama ◽  
...  
Keyword(s):  
Photon Energy ◽  
Pulse Energy ◽  
Free Electron ◽  
Free Electron Laser ◽  
Total Reflection ◽  
Experimental Chamber ◽  
X Rays ◽  
X Ray ◽  
Set Up ◽  
Focused Beam

A nanofocusing optical system—referred to as 100 exa—for an X-ray free-electron laser (XFEL) was developed to generate an extremely high intensity of 100 EW/cm2 (1020 W/cm2) using total reflection mirrors. The system is based on Kirkpatrick-Baez geometry, with 250-mm-long elliptically figured mirrors optimized for the SPring-8 Angstrom Compact Free-Electron Laser (SACLA) XFEL facility. The nano-precision surface employed is coated with rhodium and offers a high reflectivity of 80%, with a photon energy of up to 12 keV, under total reflection conditions. Incident X-rays on the optics are reflected with a large spatial acceptance of over 900 μm. The focused beam is 210 nm × 120 nm (full width at half maximum) and was evaluated at a photon energy of 10 keV. The optics developed for 100 exa efficiently achieved an intensity of 1 × 1020 W/cm2 with a pulse duration of 7 fs and a pulse energy of 150 μJ (25% of the pulse energy generated at the light source). The experimental chamber, which can provide different stage arrangements and sample conditions, including vacuum environments and atmospheric-pressure helium, was set up with the focusing optics to meet the experimental requirements.

scholarly journals High Repetition Rate and Coherent Free-Electron Laser in the X-Rays Range Tailored for Linear Spectroscopy

Instruments ◽  
2019 ◽  
Vol 3 (3) ◽  
pp. 47 ◽  
Author(s):  
Vittoria Petrillo ◽  
Michele Opromolla ◽  
Alberto Bacci ◽  
Illya Drebot ◽  
Giacomo Ghiringhelli ◽  
...  
Keyword(s):  
Free Electron ◽  
Repetition Rate ◽  
Free Electron Laser ◽  
Extreme Ultraviolet ◽  
High Harmonic ◽  
High Repetition Rate ◽  
X Rays ◽  
Regenerative Amplifier ◽  
X Ray ◽  
High Repetition

Fine time-resolved analysis of matter—i.e., spectroscopy and photon scattering—in the linear response regime requires fs-scale pulsed, high repetition rate, fully coherent X-ray sources. A seeded Free Electron Laser (FEL) driven by a Linac based on Super Conducting cavities, generating 10 8 – 10 10 coherent photons at 2–5 keV with 0.2–1 MHz of repetition rate, can address this need. Three different seeding schemes, reaching the X-ray range, are described hereafter. The first two are multi-stage cascades upshifting the radiation frequency by a factor of 10–30 starting from a seed represented by a coherent flash of extreme ultraviolet light. This radiation can be provided either by the High Harmonic Generation of an optical laser or by an FEL Oscillator operating at 12–14 nm. The third scheme is a regenerative amplifier working with X-ray mirrors. The whole chain of the X-ray generation is here described by means of start-to-end simulations.

scholarly journals Single Shot Coherence Properties of the Free-Electron Laser SACLA in the Hard X-ray Regime

2014 ◽  
Vol 4 (1) ◽  
Author(s):  
Felix Lehmkühler ◽  
Christian Gutt ◽  
Birgit Fischer ◽  
Martin A. Schroer ◽  
Marcin Sikorski ◽  
...  
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Single Shot ◽  
X Ray

scholarly journals Multiple application X-ray imaging chamber for single-shot diffraction experiments with femtosecond X-ray laser pulses

2014 ◽  
Vol 47 (1) ◽  
pp. 188-197 ◽  
Author(s):  
Changyong Song ◽  
Kensuke Tono ◽  
Jaehyun Park ◽  
Tomio Ebisu ◽  
Sunam Kim ◽  
...  
Keyword(s):  
Free Electron ◽  
Single Pulse ◽  
Laser Pulses ◽  
Atomic Scale ◽  
Single Shot ◽  
X Rays ◽  
Structural Investigations ◽  
X Ray ◽  
Multiple Application ◽  
X Ray Imaging

X-ray free-electron lasers (XFELs) provide intense (∼1012 photons per pulse) coherent X-rays with ultra-short (∼10−14 s) pulse lengths. X-rays of such an unprecedented nature have introduced new means of atomic scale structural investigations, and discoveries are still ongoing. Effective use of XFELs would be further accelerated on a highly adaptable platform where most of the new experiments can be realized. Introduced here is the multiple-application X-ray imaging chamber (MAXIC), which is able to carry out various single-pulse diffraction experiments including single-shot imaging, nanocrystallographic data acquisition and ultra-fast pump–probe scattering for specimens in solid, liquid and gas phases. The MAXIC established at the SPring-8 ångström compact free-electron laser (SACLA) has demonstrated successful applications in the aforementioned experiments, but is not limited to them. Also introduced are recent experiments on single-shot diffraction imaging of Au nanoparticles and serial crystallographic data collection of lysozyme crystals at SACLA.

STUDY OF TRANSVERSE EFFECTS IN THE PRODUCTION OF X-RAYS WITH A FREE-ELECTRON LASER BASED ON AN OPTICAL UNDULATOR

2007 ◽  
Vol 22 (23) ◽  
pp. 4270-4279
Author(s):  
A. BACCI ◽  
C. MAROLI ◽  
V. PETRILLO ◽  
L. SERAFNI ◽  
M. FERRARIO
Keyword(s):  
Electron Beam ◽  
Free Electron ◽  
Free Electron Laser ◽  
Laser Energy ◽  
Laser Pulses ◽  
Collective Effects ◽  
Laser Source ◽  
X Rays ◽  
X Ray ◽  
Back Scattering

The interaction between high-brilliance electron beams and counter-propagating laser pulses produces X rays via Thomson back-scattering. If the laser source is long and intense enough, the electrons of the beam can bunch and a regime of collective effects can establish. In this case of dominating collective effects, the FEL instability can develop and the system behaves like a free-electron laser based on an optical undulator. Coherent X-rays can be irradiated, with a bandwidth very much thinner than that of the corresponding incoherent emission. The emittance of the electron beam and the distribution of the laser energy are the principal quantities that limit the growth of the X-ray signal. In this work we analyse with a 3-D code the transverse effects in the emission produced by a relativistic electron beam when it is under the action of an optical laser pulse and the X-ray spectra obtained. The scalings typical of the optical wiggler, characterized by very short gain lengths and overall time durations of the process make possible considerable emission also with emittance of the order of 1mm mrad.

scholarly journals Perspectives towards Sub-Ångström Working Regime of the European X-ray Free-Electron Laser with Low-Emittance Electron Beams

2021 ◽  
Vol 11 (22) ◽  
pp. 10768
Author(s):  
Ye Chen ◽  
Frank Brinker ◽  
Winfried Decking ◽  
Matthias Scholz ◽  
Lutz Winkelmann
Keyword(s):  
Electron Beam ◽  
Photon Energy ◽  
Free Electron ◽  
Free Electron Laser ◽  
Electron Beams ◽  
Energy Levels ◽  
Energetic Electron ◽  
X Rays ◽  
X Ray ◽  
Low Emittance

Sub-ångström working regime refers to a working state of free-electron lasers which allows the generation of hard X-rays at a photon wavelength of 1 ångström and below, that is, a photon energy of 12.5 keV and above. It is demonstrated that the accelerators of the European X-ray Free-Electron Laser can provide highly energetic electron beams of up to 17.5 GeV. Along with long variable-gap undulators, the facility offers superior conditions for exploring self-amplified spontaneous emission (SASE) in the sub-ångström regime. However, the overall FEL performance relies quantitatively on achievable electron beam qualities through a kilometers-long accelerator beamline. Low-emittance electron beam production and the associated start-to-end beam physics thus becomes a prerequisite to dig in the potentials of SASE performance towards higher photon energies. In this article, we present the obtained results on electron beam qualities produced with different accelerating gradients of 40 MV/m–56 MV/m at the cathode, as well as the final beam qualities in front of the undulators via start-to-end simulations considering realistic conditions. SASE studies in the sub-ångström regime, using optimized electron beams, are carried out at varied energy levels according to the present state of the facility, that is, a pulsed mode operating with a 10 Hz-repetition 0.65 ms-long bunch train energized to 14 GeV and 17.5 GeV. Millijoule-level SASE intensity is obtained at a photon energy of 25 keV at 14 GeV electron beam energy using a gain length of about 7 m. At 17.5 GeV, half-millijoule lasing is achieved at 40 keV. Lasing at up to 50 keV is demonstrated with pulse energies in the range of a few hundreds and tens of microjoules with existing undulators and currently achievable electron beam qualities.

scholarly journals Spectral monitoring at SwissFEL using a high-resolution on-line hard X-ray single-shot spectrometer

2021 ◽  
Vol 28 (6) ◽  
Author(s):  
Christian David ◽  
Gediminas Seniutinas ◽  
Mikako Makita ◽  
Benedikt Rösner ◽  
Jens Rehanek ◽  
...  
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Reference Data ◽  
Diffraction Order ◽  
Laser Pulses ◽  
Single Shot ◽  
Spectral Measurements ◽  
X Ray ◽  
On Line ◽  
Spectral Monitoring

The performance and parameters of the online photon single-shot spectrometer (PSSS) at the Aramis beamline of the SwissFEL free-electron laser are presented. The device operates between the photon energies 4 and 13 keV and uses diamond transmission gratings and bent Si crystals for spectral measurements on the first diffraction order of the beam. The device has an energy window of 0.7% of the median photon energy of the free-electron laser pulses and a spectral resolution (full width at half-maximum) ΔE/E on the order of 10−5. The device was characterized by comparing its performance with reference data from synchrotron sources, and a parametric study investigated other effects that could affect the reliability of the spectral information.

scholarly journals All Femtosecond Optical Pump and X-Ray Probe: Holey-Axicon for Free Electron Laser

2020 ◽  
Author(s):  
Vijayakumar Anand ◽  
Jovan Maksimovic ◽  
Tomas Katkus ◽  
Soon Hock Ng ◽  
Orestas Ulcinas ◽  
...  
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Optical Axis ◽  
Bessel Beam ◽  
X Rays ◽  
Temporal Dimension ◽  
Optical Elements ◽  
Optical Pump ◽  
X Ray ◽  
Fs Laser

We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.

Single-shot arrival timing diagnostics for a soft X-ray free-electron laser beamline at SACLA

2018 ◽  
Vol 25 (1) ◽  
pp. 68-71 ◽  
Author(s):  
Shigeki Owada ◽  
Kyo Nakajima ◽  
Tadashi Togashi ◽  
Tetsuo Kayatama ◽  
Makina Yabashi
Keyword(s):  
Free Electron ◽  
Free Electron Laser ◽  
Imaging System ◽  
Laser Pulses ◽  
Single Shot ◽  
Simultaneous Operation ◽  
One Dimensional ◽  
X Ray ◽  
Arrival Timing ◽  
Optical Laser

Arrival timing diagnostics performed at a soft X-ray free-electron laser (FEL) beamline of SACLA are described. Intense soft X-ray FEL pulses with one-dimensional focusing efficiently induce transient changes of optical reflectivity on the surface of GaAs. The arrival timing between soft X-ray FEL and optical laser pulses was successfully measured as a spatial position of the reflectivity change. The temporal resolution evaluated from the imaging system reaches ∼10 fs. This method requires only a small portion of the incident pulse energy, which enables the simultaneous operation of the arrival timing diagnostics and experiments by introducing a wavefront-splitting scheme.

Sign in / Sign up

Export Citation Format

Share Document