Sub-band-gap photoresponse ofTiO2−xthin-film—electrolyte interface

1984 ◽  
Vol 30 (7) ◽  
pp. 3625-3628 ◽  
Author(s):  
Wha-Tek Kim ◽  
Chang-Dae Kim ◽  
Q. Won Choi
2020 ◽  
Vol 22 (7) ◽  
pp. 3784-3788
Author(s):  
Weiqing Liu ◽  
Fei Liu ◽  
Zongjian Wu ◽  
Rutao Xiong ◽  
Zhimin Mao ◽  
...  

This communication uses EQCM in combination with the potentiostatic method to study the in situ exchange mechanism for dye molecules and cations on the nano-film surface under a constant potential.


1996 ◽  
Vol 451 ◽  
Author(s):  
I. V. Shiyanovskaya

ABSTRACTThe influence of film/electrolyte interface on structure and electrochromic properties of amorphous WO3 (a-WO3) films has been studied using cyclic voltammetry, optical electrochemistry and vibrational spectroscopy.


1989 ◽  
Vol 260 (1) ◽  
pp. 25-35 ◽  
Author(s):  
A.S. Bluvstein ◽  
N.V. Syrchina ◽  
G.N. Mansurov ◽  
A.Z. Zaidenberg ◽  
A.M. Brodsky ◽  
...  

Author(s):  
Joanna L. Batstone

Interest in II-VI semiconductors centres around optoelectronic device applications. The wide band gap II-VI semiconductors such as ZnS, ZnSe and ZnTe have been used in lasers and electroluminescent displays yielding room temperature blue luminescence. The narrow gap II-VI semiconductors such as CdTe and HgxCd1-x Te are currently used for infrared detectors, where the band gap can be varied continuously by changing the alloy composition x.Two major sources of precipitation can be identified in II-VI materials; (i) dopant introduction leading to local variations in concentration and subsequent precipitation and (ii) Te precipitation in ZnTe, CdTe and HgCdTe due to native point defects which arise from problems associated with stoichiometry control during crystal growth. Precipitation is observed in both bulk crystal growth and epitaxial growth and is frequently associated with segregation and precipitation at dislocations and grain boundaries. Precipitation has been observed using transmission electron microscopy (TEM) which is sensitive to local strain fields around inclusions.


Author(s):  
J.M. Bonar ◽  
R. Hull ◽  
R. Malik ◽  
R. Ryan ◽  
J.F. Walker

In this study we have examined a series of strained heteropeitaxial GaAs/InGaAs/GaAs and InGaAs/GaAs structures, both on (001) GaAs substrates. These heterostructures are potentially very interesting from a device standpoint because of improved band gap properties (InAs has a much smaller band gap than GaAs so there is a large band offset at the InGaAs/GaAs interface), and because of the much higher mobility of InAs. However, there is a 7.2% lattice mismatch between InAs and GaAs, so an InxGa1-xAs layer in a GaAs structure with even relatively low x will have a large amount of strain, and misfit dislocations are expected to form above some critical thickness. We attempt here to correlate the effect of misfit dislocations on the electronic properties of this material.The samples we examined consisted of 200Å InxGa1-xAs layered in a hetero-junction bipolar transistor (HBT) structure (InxGa1-xAs on top of a (001) GaAs buffer, followed by more GaAs, then a layer of AlGaAs and a GaAs cap), and a series consisting of a 200Å layer of InxGa1-xAs on a (001) GaAs substrate.


Sign in / Sign up

Export Citation Format

Share Document