scholarly journals 4D pine scale: biomimetic 4D printed autonomous scale and flap structures capable of multi-phase movement

2020 ◽  
Vol 378 (2167) ◽  
pp. 20190445 ◽  
Author(s):  
David Correa ◽  
Simon Poppinga ◽  
Max D. Mylo ◽  
Anna S. Westermeier ◽  
Bernd Bruchmann ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Image Correlation ◽  
Technical Structure ◽  
Cellulose Fibrils ◽  
Longitudinal Bending ◽  
Scale Structures ◽  
Multi Phase ◽  
Printing Techniques ◽  
Shape Changes ◽  
Phase Motion

We developed biomimetic hygro-responsive composite polymer scales inspired by the reversible shape-changes of Bhutan pine ( Pinus wallichiana ) cone seed scales. The synthetic kinematic response is made possible through novel four-dimensional (4D) printing techniques with anisotropic material use, namely copolymers with embedded cellulose fibrils and ABS polymer. Multi-phase motion like the subsequent transversal and longitudinal bending deformation during desiccation of a natural pinecone scale can be structurally programmed into such printed hygromorphs. Both the natural concept generator (Bhutan pinecone scale) and the biomimetic technical structure (4D printed scale) were comparatively investigated as to their displacement and strain over time via three-dimensional digital image correlation methods. Our bioinspired prototypes can be the basis for tailored autonomous and self-sufficient flap and scale structures performing complex consecutive motions for technical applications, e.g. in architecture and soft robotics. This article is part of the theme issue ‘Bioinspired materials and surfaces for green science and technology (part 3)’.

scholarly journals In-Process Measurement of Three-Dimensional Deformations Based on Speckle Photography

2021 ◽  
Vol 11 (11) ◽  
pp. 4981
Author(s):  
Andreas Tausendfreund ◽  
Dirk Stöbener ◽  
Andreas Fischer
Keyword(s):  
Evaluation Method ◽  
Process Analysis ◽  
Plane Deformation ◽  
Three Dimensional ◽  
Machining Process ◽  
Image Correlation ◽  
Speckle Photography ◽  
Process Measurement ◽  
Out Of Plane ◽  
Plane Deformations

In the concept of the process signature, the relationship between a material load and the modification remaining in the workpiece is used to better understand and optimize manufacturing processes. The basic prerequisite for this is to be able to measure the loads occurring during the machining process in the form of mechanical deformations. Speckle photography is suitable for this in-process measurement task and is already used in a variety of ways for in-plane deformation measurements. The shortcoming of this fast and robust measurement technique based on image correlation techniques is that out-of-plane deformations in the direction of the measurement system cannot be detected and increases the measurement error of in-plane deformations. In this paper, we investigate a method that infers local out-of-plane motions of the workpiece surface from the decorrelation of speckle patterns and is thus able to reconstruct three-dimensional deformation fields. The implementation of the evaluation method enables a fast reconstruction of 3D deformation fields, so that the in-process capability remains given. First measurements in a deep rolling process show that dynamic deformations underneath the die can be captured and demonstrate the suitability of the speckle method for manufacturing process analysis.

scholarly journals Increase in Total Elongation Caused by Pure Shear Deformation in Ultra-Fine-Grained Cu Processed by Equal-Channel Angular Pressing

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 654
Author(s):  
Ryosuke Matsutani ◽  
Nobuo Nakada ◽  
Susumu Onaka
Keyword(s):  
Shear Deformation ◽  
Equal Channel Angular Pressing ◽  
Pure Shear ◽  
Three Dimensional ◽  
Tensile Tests ◽  
Total Elongation ◽  
Local Deformation ◽  
Image Correlation ◽  
Fine Grained ◽  
Angular Pressing

Ultra-fine-grained (UFG) Cu shows little total elongation in tensile tests because simple shear deformation is concentrated in narrow regions during the initial stage of plastic deformation. Here, we attempted to improve the total elongation of UFG Cu obtained by equal-channel angular pressing. By making shallow dents on the side surfaces of the plate-like specimens, this induced pure shear deformation and increased their total elongation. During the tensile tests, we observed the overall and local deformation of the dented and undented UFG Cu specimens. Using three-dimensional digital image correlation, we found that the dented specimens showed suppression of thickness reduction and delay in fracture by enhancement of pure shear deformation. However, the dented and undented specimens had the same ultimate tensile strength. These results provide us a new concept to increase total elongation of UFG materials.

scholarly journals Polymeric Bioinks for 3D Hepatic Printing

Chemistry ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 164-181
Author(s):  
Joyita Sarkar ◽  
Swapnil C. Kamble ◽  
Nilambari C. Kashikar
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Soft Tissues ◽  
Three Dimensional ◽  
Stem Cell Differentiation ◽  
Synthetic Polymers ◽  
Bioactive Molecules ◽  
Complex Geometries ◽  
Printing Techniques ◽  
Natural And Synthetic

Three-dimensional (3D) printing techniques have revolutionized the field of tissue engineering. This is especially favorable to construct intricate tissues such as liver, as 3D printing allows for the precise delivery of biomaterials, cells and bioactive molecules in complex geometries. Bioinks made of polymers, of both natural and synthetic origin, have been very beneficial to printing soft tissues such as liver. Using polymeric bioinks, 3D hepatic structures are printed with or without cells and biomolecules, and have been used for different tissue engineering applications. In this review, with the introduction to basic 3D printing techniques, we discuss different natural and synthetic polymers including decellularized matrices that have been employed for the 3D bioprinting of hepatic structures. Finally, we focus on recent advances in polymeric bioinks for 3D hepatic printing and their applications. The studies indicate that much work has been devoted to improvising the design, stability and longevity of the printed structures. Others focus on the printing of tissue engineered hepatic structures for applications in drug screening, regenerative medicine and disease models. More attention must now be diverted to developing personalized structures and stem cell differentiation to hepatic lineage.

scholarly journals From three-dimensional weavings to swollen corneocytes

2011 ◽  
Vol 8 (62) ◽  
pp. 1274-1280 ◽  
Author(s):  
Myfanwy E. Evans ◽  
Stephen T. Hyde
Keyword(s):  
Three Dimensional ◽  
Simple Shape ◽  
Outermost Layer ◽  
One Dimensional ◽  
Periodic Arrays ◽  
Novel Technique ◽  
Structural Rigidity ◽  
Mammalian Skin ◽  
Shape Changes ◽  
The Ideal

A novel technique to generate three-dimensional Euclidean weavings, composed of close-packed, periodic arrays of one-dimensional fibres, is described. Some of these weavings are shown to dilate by simple shape changes of the constituent fibres (such as fibre straightening). The free volume within a chiral cubic example of a dilatant weaving, the ideal conformation of the G 129 weaving related to the Σ + rod packing, expands more than fivefold on filament straightening. This remarkable three-dimensional weaving, therefore, allows an unprecedented variation of packing density without loss of structural rigidity and is an attractive design target for materials. We propose that the G 129 weaving (ideal Σ + weaving) is formed by keratin fibres in the outermost layer of mammalian skin, probably templated by a folded membrane.

Three-Dimensional Evaluation of Breast Augmentation and the Influence of Anatomic and Round Implants on Operative Breast Shape Changes

2012 ◽  
Vol 36 (4) ◽  
pp. 879-887 ◽  
Author(s):  
Laszlo Kovacs ◽  
Maximilian Eder ◽  
Alexander Zimmermann ◽  
Daniel Müller ◽  
Tibor Schuster ◽  
...  
Keyword(s):  
Breast Augmentation ◽  
Three Dimensional ◽  
Breast Shape ◽  
Shape Changes

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document