Absolute high spectral resolution measurements of surface solar radiation for detection of water vapour continuum absorption

2012 ◽  
Vol 370 (1968) ◽  
pp. 2590-2610 ◽  
Author(s):  
T. D. Gardiner ◽  
M. Coleman ◽  
H. Browning ◽  
L. Tallis ◽  
I. V. Ptashnik ◽  
...  
Keyword(s):  
Water Vapour ◽  
Field Measurements ◽  
Solar Irradiation ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Spectral Structure ◽  
Atmospheric Transmission ◽  
Surface Solar Radiation ◽  
Continuum Absorption

Solar-pointing Fourier transform infrared (FTIR) spectroscopy offers the capability to measure both the fine scale and broadband spectral structure of atmospheric transmission simultaneously across wide spectral regions. It is therefore suited to the study of both water vapour monomer and continuum absorption behaviours. However, in order to properly address this issue, it is necessary to radiatively calibrate the FTIR instrument response. A solar-pointing high-resolution FTIR spectrometer was deployed as part of the ‘Continuum Absorption by Visible and Infrared radiation and its Atmospheric Relevance’ (CAVIAR) consortium project. This paper describes the radiative calibration process using an ultra-high-temperature blackbody and the consideration of the related influence factors. The result is a radiatively calibrated measurement of the solar irradiation at the ground across the IR region from 2000 to 10 000 cm −1 with an uncertainty of between 3.3 and 5.9 per cent. This measurement is shown to be in good general agreement with a radiative-transfer model. The results from the CAVIAR field measurements are being used in ongoing studies of atmospheric absorbers, in particular the water vapour continuum.

scholarly journals The QME AERI LBLRTM: A Closure Experiment for Downwelling High Spectral Resolution Infrared Radiance

2004 ◽  
Vol 61 (22) ◽  
pp. 2657-2675 ◽  
Author(s):  
D. D. Turner ◽  
D. C. Tobin ◽  
S. A. Clough ◽  
P. D. Brown ◽  
R. G. Ellingson ◽  
...  
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Continuum Absorption ◽  
Clear Sky ◽  
Infrared Radiance ◽  
Wide Range ◽  
Atmospheric State

Abstract Research funded by the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program has led to significant improvements in longwave radiative transfer modeling over the last decade. These improvements, which have generally come in small incremental changes, were made primarily in the water vapor self- and foreign-broadened continuum and the water vapor absorption line parameters. These changes, when taken as a whole, result in up to a 6 W m−2 improvement in the modeled clear-sky downwelling longwave radiative flux at the surface and significantly better agreement with spectral observations. This paper provides an overview of the history of ARM with regard to clear-sky longwave radiative transfer, and analyzes remaining related uncertainties in the ARM state-of-the-art Line-by-Line Radiative Transfer Model (LBLRTM). A quality measurement experiment (QME) for the downwelling infrared radiance at the ARM Southern Great Plains site has been ongoing since 1994. This experiment has three objectives: 1) to validate and improve the absorption models and spectral line parameters used in line-by-line radiative transfer models, 2) to assess the ability to define the atmospheric state, and 3) to assess the quality of the radiance observations that serve as ground truth for the model. Analysis of data from 1994 to 1997 made significant contributions to optimizing the QME, but is limited by small but significant uncertainties and deficiencies in the atmospheric state and radiance observations. This paper concentrates on the analysis of QME data from 1998 to 2001, wherein the data have been carefully selected to address the uncertainties in the 1994–97 dataset. Analysis of this newer dataset suggests that the representation of self-broadened water vapor continuum absorption is 3%–8% too strong in the 750–1000 cm−1 region. The dataset also provides information on the accuracy of the self- and foreign-broadened continuum absorption in the 1100–1300 cm−1 region. After accounting for these changes, remaining differences in modeled and observed downwelling clear-sky fluxes are less than 1.5 W m−2 over a wide range of atmospheric states.

Dependence of Simulation Biases at AHI Surface-Sensitive Channels on Land Surface Emissivity over China

2018 ◽  
Vol 35 (6) ◽  
pp. 1283-1298 ◽  
Author(s):  
X. Zhuge ◽  
X. Zou ◽  
F. Weng ◽  
M. Sun
Keyword(s):  
Brightness Temperature ◽  
Spectral Resolution ◽  
Land Surface ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Surface Emissivity ◽  
Bare Rock ◽  
Land Surface Emissivity ◽  
M Channels

AbstractThis study compares the simulation biases of Advanced Himawari Imager (AHI) brightness temperature to observations made at night over China through the use of three land surface emissivity (LSE) datasets. The University of Wisconsin–Madison High Spectral Resolution Emissivity dataset, the Combined Advanced Spaceborne Thermal Emission and Reflection Radiometer and Moderate Resolution Imaging Spectroradiometer Emissivity database over Land High Spectral Resolution Emissivity dataset, and the International Geosphere–Biosphere Programme (IGBP) infrared LSE module, as well as land skin temperature observations from the National Basic Meteorological Observing stations in China are used as inputs to the Community Radiative Transfer Model. The results suggest that the standard deviations of AHI observations minus background simulations (OMBs) are largely consistent for the three LSE datasets. Also, negative biases of the OMBs of brightness temperature uniformly occur for each of the three datasets. There are no significant differences in OMB biases estimated with the three LSE datasets over cropland and forest surface types for all five AHI surface-sensitive channels. Over the grassland surface type, significant differences (~0.8 K) are found at the 10.4-, 11.2-, and 12.4-μm channels if using the IGBP dataset. Over nonvegetated surface types (e.g., sandy land, gobi, and bare rock), the lack of a monthly variation in IGBP LSE introduces large negative biases for the 3.9- and 8.6-μm channels, which are greater than those from the two other LSE datasets. Thus, improvements in simulating AHI infrared surface-sensitive channels can be made when using spatially and temporally varying LSE estimates.

scholarly journals A non-iterative linear retrieval for infrared high-resolution limb sounders

2013 ◽  
Vol 6 (5) ◽  
pp. 1381-1396
Author(s):  
L. Millán ◽  
A. Dudhia
Keyword(s):  
High Resolution ◽  
Computing Time ◽  
Michelson Interferometer ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Spectral Signature ◽  
Transfer Model ◽  
Concentration Difference ◽  
Error Margin ◽  
Retrieval Scheme

Abstract. Currently, most of the high-spectral-resolution infrared limb sounders use subsets of the recorded spectra (microwindows) in their retrieval schemes to reduce the computing time of rerunning the radiative transfer model. A fast linear retrieval scheme is described which allows the whole spectral signature of the target molecule to be used. We determine that pressure and temperature retrievals can be treated linearly up to a 20% difference between the atmospheric state and the linearisation point for a 3% error margin and up to 10 K "difference" for a 3 K error margin near the stratopause and less than 0.5 K elsewhere. Assuming perfect pT knowledge, CH4 retrievals can be be treated linearly up to a 20% CH4 concentration "difference" for a 2% error margin. As an example, this technique is implemented for the Michelson Interferometer for Passive Atmospheric Sounding instrument, but it is applicable to any high-resolution limb sounder.

scholarly journals Development and recent evaluation of the MT_CKD model of continuum absorption

2012 ◽  
Vol 370 (1968) ◽  
pp. 2520-2556 ◽  
Author(s):  
Eli J. Mlawer ◽  
Vivienne H. Payne ◽  
Jean-Luc Moncet ◽  
Jennifer S. Delamere ◽  
Matthew J. Alvarado ◽  
...  
Keyword(s):  
Water Vapour ◽  
Line Shape ◽  
Mathematical Formulation ◽  
Field Measurements ◽  
Continuum Absorption ◽  
Semi Empirical ◽  
Vapour Molecule ◽  
Primary Agent ◽  
The Continuum

Water vapour continuum absorption is an important contributor to the Earth's radiative cooling and energy balance. Here, we describe the development and status of the MT_CKD (MlawerTobinCloughKneizysDavies) water vapour continuum absorption model. The perspective adopted in developing the MT_CKD model has been to constrain the model so that it is consistent with quality analyses of spectral atmospheric and laboratory measurements of the foreign and self continuum. For field measurements, only cases for which the characterization of the atmospheric state has been highly scrutinized have been used. Continuum coefficients in spectral regions that have not been subject to compelling analyses are determined by a mathematical formulation of the spectral shape associated with each water vapour monomer line. This formulation, which is based on continuum values in spectral regions in which the coefficients are well constrained by measurements, is applied consistently to all water vapour monomer lines from the microwave to the visible. The results are summed-up (separately for the foreign and self) to obtain continuum coefficients from 0 to 20 000 cm −1 . For each water vapour line, the MT_CKD line shape formulation consists of two components: exponentially decaying far wings of the line plus a contribution from a water vapour molecule undergoing a weak interaction with a second molecule. In the MT_CKD model, the first component is the primary agent for the continuum between water vapour bands, while the second component is responsible for the majority of the continuum within water vapour bands. The MT_CKD model should be regarded as a semi-empirical model with strong constraints provided by the known physics. Keeping the MT_CKD continuum consistent with current observational studies necessitates periodic updates to the water vapour continuum coefficients. In addition to providing details on the MT_CKD line shape formulation, we describe the most recent update to the model, MT_CKD_2.5, which is based on an analysis of satellite- and ground-based observations from 2385 to 2600 cm −1 (approx. 4 μm).

scholarly journals Radiative Transfer Model parametrization for simulating the reflectance of meadow vegetation

2014 ◽  
Vol 18 (2) ◽  
pp. 5-9 ◽  
Author(s):  
Anna M. Jarocińska
Keyword(s):  
Radiative Transfer ◽  
Field Measurements ◽  
Radiative Transfer Model ◽  
Model Parameters ◽  
Transfer Model ◽  
Biophysical Parameters ◽  
Input Parameters ◽  
Vegetation Characteristics ◽  
Field Reflectance ◽  
Lower Water Content

Abstract Natural vegetation is complex and its reflectance is not easy to model. The aim of this study was to adjust the Radiative Transfer Model parameters for modelling the reflectance of heterogeneous meadows and evaluate its accuracy dependent on the vegetation characteristics. PROSAIL input parameters and reference spectra were collected during field measurements. Two different datasets were created: in the first, the input parameters were modelled using only field measurements; in the second, three input parameters were adjusted to minimize the differences between modelled and measured spectra. Reflectance was modelled using two datasets and then verified based on field reflectance using the RMSE. The average RMSE for the first dataset was equal to 0.1058, the second was 0.0362. The accuracy of the simulated spectra was analysed dependent on the value of the biophysical parameters. Better results were obtained for meadows with higher biomass value, greater LAI and lower water content.

scholarly journals Local Tilt Optimization of Photovoltaic Solar Panels for Maximum Radiation Absorption

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Mauro Masili ◽  
Liliane Ventura
Keyword(s):  
Solar Radiation ◽  
Tilt Angle ◽  
Spectral Response ◽  
Solar Spectrum ◽  
Weather Conditions ◽  
Solar Irradiation ◽  
Radiation Absorption ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Solar Panels

Incident solar radiation on photovoltaic (PV) solar panels is not constant throughout the year. Besides dependence on the season, solar radiation is reliant on the location and weather conditions. For a given location on Earth, the best-fixed orientation of a PV panel can be determined by achieving the maximum incident solar irradiance throughout the year or for a predetermined period. In this paper, we use a sophisticated atmospheric radiative transfer model to calculate the direct and diffuse solar irradiation (radiant exposure) for the solar spectrum incident on PV solar panels to determine the best tilt angle of the panel in order to maximize absorption of solar radiation for selected periods. We used the Regula-Falsi numerical method to obtain the tilt angle at which the derivative of solar irradiation (concerning the tilt angle) approaches zero. Moreover, the spectral response of typical silicon cells is taken into account. These calculations were carried out in São Carlos (SP), a town in the southeast of Brazil. The best tilt angle was obtained for three selected periods. Additionally, we provide results for Southern latitudes ranging from 0° to −55° in steps of −5° for the meteorological seasons. We have shown that for each period, there is an increase in solar radiation absorption compared to the traditional installation angle based exclusively on the local latitude. These calculations can be extended to any location.

scholarly journals A non-iterative linear retrieval for infrared high resolution limb sounders

2013 ◽  
Vol 6 (1) ◽  
pp. 721-766
Author(s):  
L. Millán ◽  
A. Dudhia
Keyword(s):  
High Resolution ◽  
Computing Time ◽  
Michelson Interferometer ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Spectral Signature ◽  
Transfer Model ◽  
Gas Concentration ◽  
Atmospheric Sounding ◽  
Retrieval Scheme

Abstract. Currently most of the high spectral resolution infrared limb sounders use subsets of the recorded spectra (microwindows) in their retrieval schemes to reduce the computing time of rerunning the radiative transfer model. A fast linear retrieval scheme is described which allows the whole spectral signature of the target molecule to be used. We determine how close the linearisation point needs to be to the solution in order to fall in the linear regime and also suggest an adjustment to the forward model and Jacobians to propagate the change in pressure and temperature on the gas concentration retrievals. As an example, this technique is implemented for the Michelson Interferometer for Passive Atmospheric Sounding instrument, but it is applicable to any high resolution limb sounder.

scholarly journals Retrieval of Ice Cloud Properties from AIRS and MODIS Observations Based on a Fast High-Spectral-Resolution Radiative Transfer Model

2013 ◽  
Vol 52 (3) ◽  
pp. 710-726 ◽  
Author(s):  
Chenxi Wang ◽  
Ping Yang ◽  
Steven Platnick ◽  
Andrew K. Heidinger ◽  
Bryan A. Baum ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Spectral Resolution ◽  
Spectral Response ◽  
Thermal Infrared ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Retrieval Method ◽  
Ice Cloud ◽  
Cloud Properties

AbstractA computationally efficient high-spectral-resolution cloudy-sky radiative transfer model (HRTM) in the thermal infrared region (700–1300 cm−1, 0.1 cm−1 spectral resolution) is advanced for simulating the upwelling radiance at the top of atmosphere and for retrieving cloud properties. A precomputed transmittance database is generated for simulating the absorption contributed by up to seven major atmospheric absorptive gases (H2O, CO2, O3, O2, CH4, CO, and N2O) by using a rigorous line-by-line radiative transfer model (LBLRTM). Both the line absorption of individual gases and continuum absorption are included in the database. A high-spectral-resolution ice particle bulk scattering properties database is employed to simulate the radiation transfer within a vertically nonisothermal ice cloud layer. Inherent to HRTM are sensor spectral response functions that couple with high-spectral-resolution measurements in the thermal infrared regions from instruments such as the Atmospheric Infrared Sounder (AIRS) and Infrared Atmospheric Sounding Interferometer. When compared with the LBLRTM and the discrete ordinates radiative transfer model (DISORT), the root-mean-square error of HRTM-simulated single-layer cloud brightness temperatures in the thermal infrared window region is generally smaller than 0.2 K. An ice cloud optical property retrieval scheme is developed using collocated AIRS and Moderate Resolution Imaging Spectroradiometer (MODIS) data. A retrieval method is proposed to take advantage of the high-spectral-resolution instrument. On the basis of the forward model and retrieval method, a case study is presented for the simultaneous retrieval of ice cloud optical thickness τ and effective particle size Deff that includes a cloud-top-altitude self-adjustment approach to improve consistency with simulations.

scholarly journals On the ability of RegCM4 regional climate model to simulate surface solar radiation patterns over Europe: an assessment using satellite-based observations

2015 ◽  
Vol 15 (22) ◽  
pp. 13195-13216 ◽  
Author(s):  
G. Alexandri ◽  
A. K. Georgoulias ◽  
P. Zanis ◽  
E. Katragkou ◽  
A. Tsikerdekis ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Regional Climate Model ◽  
Climate Model ◽  
Regional Climate ◽  
Radiative Transfer Model ◽  
Asymmetry Factor ◽  
Transfer Model ◽  
Potential Contribution ◽  
Absolute Deviation ◽  
Surface Solar Radiation

Abstract. In this work, we assess the ability of RegCM4 regional climate model to simulate surface solar radiation (SSR) patterns over Europe. A decadal RegCM4 run (2000–2009) was implemented and evaluated against satellite-based observations from the Satellite Application Facility on Climate Monitoring (CM SAF), showing that the model simulates adequately the SSR patterns over the region. The SSR bias between RegCM4 and CM SAF is +1.5 % for MFG (Meteosat First Generation) and +3.3 % for MSG (Meteosat Second Generation) observations. The relative contribution of parameters that determine the transmission of solar radiation within the atmosphere to the deviation appearing between RegCM4 and CM SAF SSR is also examined. Cloud macrophysical and microphysical properties such as cloud fractional cover (CFC), cloud optical thickness (COT) and cloud effective radius (Re) from RegCM4 are evaluated against data from CM SAF. Generally, RegCM4 underestimates CFC by 24.3 % and Re for liquid/ice clouds by 36.1 %/28.3 % and overestimates COT by 4.3 %. The same procedure is repeated for aerosol optical properties such as aerosol optical depth (AOD), asymmetry factor (ASY) and single-scattering albedo (SSA), as well as other parameters, including surface broadband albedo (ALB) and water vapor amount (WV), using data from MACv1 aerosol climatology, from CERES satellite sensors and from ERA-Interim reanalysis. It is shown here that the good agreement between RegCM4 and satellite-based SSR observations can be partially attributed to counteracting effects among the above mentioned parameters. The potential contribution of each parameter to the RegCM4–CM SAF SSR deviations is estimated with the combined use of the aforementioned data and a radiative transfer model (SBDART). CFC, COT and AOD are the major determinants of these deviations on a monthly basis; however, the other parameters also play an important role for specific regions and seasons. Overall, for the European domain, CFC, COT and AOD are the most important factors, since their underestimations and overestimations by RegCM4 cause an annual RegCM4–CM SAF SSR absolute deviation of 8.4, 3.8 and 4.5 %, respectively.

Sign in / Sign up

Export Citation Format

Share Document