scholarly journals The preparation and characterization of uniform nanoporous structure on glass

2020 ◽  
Vol 7 (7) ◽  
pp. 192029
Author(s):  
Lei Wang ◽  
Likai Li ◽  
Youbo Liu ◽  
Shuxian Wang ◽  
Hui Cai ◽  
...  
Keyword(s):  
Contact Angle ◽  
Glass Surface ◽  
Large Scale ◽  
Low Cost ◽  
Light Transmittance ◽  
Nanoporous Structure ◽  
Fabrication Method ◽  
Acid Fog ◽  
Air Jet ◽  
Superhydrophobic Property

A novel fabrication method of uniform porous structures on the glass surface is proposed. The hydrofluoric acid fog formed by air-jet atomization etches the glass surface to fabricate nanoporous structure (NPS) on glass surface. This NPS shows the enhanced average light transmittance of approximately 92.9% and the superhydrophilic property with a contact angle less than 1° which presents an excellent anti-fog property. Passivated by fluorosilane, the NPS shows nearly the superhydrophobic property with a contact angle of 141.2°. This fabrication method has shown promising application prospects due to its simplicity, low cost and efficiency, which can be easily applied to large-scale industrial production.

scholarly journals Fabrication of Screen Printing-Based AgNWs Flexible Transparent Conductive Film with High Stability

Micromachines ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1027
Author(s):  
Jianjun Yang ◽  
Wei Zeng ◽  
Yaxin Li ◽  
Zichuan Yi ◽  
Guofu Zhou
Keyword(s):  
Screen Printing ◽  
High Stability ◽  
Large Scale ◽  
Silver Nanowires ◽  
Low Cost ◽  
Optical Microscope ◽  
Light Transmittance ◽  
Large Area ◽  
Transparent Substrate ◽  
Conductive Thin Films

Flexible transparent conductive thin films (TCFs) prepared from Silver nanowires (AgNWs) have attractive features of low cost, flexibility, and solution-processed, but the usual manufacturing methods could still be hard to be scaled up. In addition, large-scale/large-area fabrication process with industrialized potential is strongly needed. In this paper, the flexible TCFs with high stability are obtained via using screen printing method to print the AgNWs inks on a flexible and transparent substrate. The micro-structure of the AgNWs patterns is investigated by optical microscope and scanning electron microscope. Furthermore, the sheet resistance, light transmittance, and film thickness of the AgNWs patterns prepared under different conditions are characterized to explore the influence of different factors on its optical and electrical properties.

Environmental Benefits and Energy Efficiency of Superheated Steam as Media in Processing Ultra-Fine Fly Ash Technology

2010 ◽  
Vol 160-162 ◽  
pp. 1558-1563 ◽  
Author(s):  
Hai Lun Xu ◽  
Zi Lin Li
Keyword(s):  
Energy Consumption ◽  
Fly Ash ◽  
Power Plants ◽  
Large Scale ◽  
Superheated Steam ◽  
Low Cost ◽  
Thermal Power ◽  
Environmental Indicators ◽  
Environmental Benefits ◽  
Air Jet

With superheated steam from thermal power plants for medium, the fluidized bed jet mill which had improved vertical turbine classifier was used to study Superheated steam as media in processing ultra-fine fly ash technology. Experiment tested the energy consumption of processing fly ash with superheated steam, which was converted into standard coal compared with the air jet mill technology to prove the environment and energy saving advantages in superheated steam-gas processing ultra-fine fly ash. Experimental results showed that this technology has low energy consumption, high grinding force, and its grinding, grading, collection process is completely in dry method, so this technology is an ideal method for processing ultra-fine fly ash by low-cost and large-scale. At the same time, this paper assessed the environmental benefits of some environmental indicators. Finally, the applications of this technology are summarized.

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

Wetting of glass surface using natural surfactants

2020 ◽  
Vol 12 ◽  
Author(s):  
Nihar Ranjan Biswal
Keyword(s):  
Contact Angle ◽  
Glass Surface ◽  
Pure Water ◽  
Amyl Alcohol ◽  
Synthetic Surfactant ◽  
Wide Range ◽  
Different Types ◽  
Natural Surfactants ◽  
Triton X ◽  
Solid Liquid

Background: Surfactant adsorption at the interfaces (solid–liquid, liquid–air, or liquid–liquid) is receiving considerable attention from a long time due to its wide range of practical applications. Objective: Specifically wettability of solid surface by liquids is mainly measured by contact angle and has many practical importances where solid–liquid systems are used. Adsorption of surfactants plays an important role in the wetting process. The wetting behaviours of three plant-based natural surfactants (Reetha, Shikakai, and Acacia) on the glass surface are compared with one widely used nonionic synthetic surfactant (Triton X-100) and reported in this study. Methods: The dynamic contact angle study of three different types of plant surfactants (Reetha, Shikakai and Acacia) and one synthetic surfactant (Triton X 100) on the glass surface has been carried out. The effect of two different types of alcohols such as Methanol and amyl alcohol on wettability of shikakai, as it shows little higher value of contact angle on glass surface has been measured. Results: The contact angle measurements show that there is an increase in contact angle from 47° (pure water) to 67.72°, 65.57°, 68.84°, and 68.79° for Reetha, Acacia, Shikakai, and Triton X-100 respectively with the increase in surfactant concentration and remain constant at CMC. The change in contact angle of Shikakai-Amyl alcohol mixtures are slightly different than that of methanol-Shikakai mixture, mostly there is a gradual increase in contact angle with the increasing in alcohol concentration. Conclusion: There is no linear relationship between cos θ and inverse of surface tension. There was a linear increase in surface free energy results with increase in concentration as more surfactant molecules were adsorbing at the interface enhancing an increase in contact angle.

scholarly journals Rapid, large-scale species discovery in hyperdiverse taxa using 1D MinION sequencing

BMC Biology ◽  
2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Amrita Srivathsan ◽  
Emily Hartop ◽  
Jayanthi Puniamoorthy ◽  
Wan Ting Lee ◽  
Sujatha Narayanan Kutty ◽  
...  
Keyword(s):  
Dna Sequences ◽  
Large Scale ◽  
Low Cost ◽  
Small Body ◽  
Small Subset ◽  
Similar Species ◽  
Large Species ◽  
Morphological Examination ◽  
Species Discovery ◽  
Short Period

Abstract Background More than 80% of all animal species remain unknown to science. Most of these species live in the tropics and belong to animal taxa that combine small body size with high specimen abundance and large species richness. For such clades, using morphology for species discovery is slow because large numbers of specimens must be sorted based on detailed microscopic investigations. Fortunately, species discovery could be greatly accelerated if DNA sequences could be used for sorting specimens to species. Morphological verification of such “molecular operational taxonomic units” (mOTUs) could then be based on dissection of a small subset of specimens. However, this approach requires cost-effective and low-tech DNA barcoding techniques because well-equipped, well-funded molecular laboratories are not readily available in many biodiverse countries. Results We here document how MinION sequencing can be used for large-scale species discovery in a specimen- and species-rich taxon like the hyperdiverse fly family Phoridae (Diptera). We sequenced 7059 specimens collected in a single Malaise trap in Kibale National Park, Uganda, over the short period of 8 weeks. We discovered > 650 species which exceeds the number of phorid species currently described for the entire Afrotropical region. The barcodes were obtained using an improved low-cost MinION pipeline that increased the barcoding capacity sevenfold from 500 to 3500 barcodes per flowcell. This was achieved by adopting 1D sequencing, resequencing weak amplicons on a used flowcell, and improving demultiplexing. Comparison with Illumina data revealed that the MinION barcodes were very accurate (99.99% accuracy, 0.46% Ns) and thus yielded very similar species units (match ratio 0.991). Morphological examination of 100 mOTUs also confirmed good congruence with morphology (93% of mOTUs; > 99% of specimens) and revealed that 90% of the putative species belong to the neglected, megadiverse genus Megaselia. We demonstrate for one Megaselia species how the molecular data can guide the description of a new species (Megaselia sepsioides sp. nov.). Conclusions We document that one field site in Africa can be home to an estimated 1000 species of phorids and speculate that the Afrotropical diversity could exceed 200,000 species. We furthermore conclude that low-cost MinION sequencers are very suitable for reliable, rapid, and large-scale species discovery in hyperdiverse taxa. MinION sequencing could quickly reveal the extent of the unknown diversity and is especially suitable for biodiverse countries with limited access to capital-intensive sequencing facilities.

scholarly journals Synthesis of Polyaniline Coating on the Modified Fiber Ball and Application for Cr(VI) Removal

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Xiao Li Ma ◽  
Guang Tao Fei ◽  
Shao Hui Xu
Keyword(s):  
Waste Water ◽  
Large Scale ◽  
Ph Value ◽  
Low Cost ◽  
Strong Acid ◽  
Removal Capacity ◽  
Secondary Pollution ◽  
Potential Possibility ◽  
Fiber Ball ◽  
Maximum Removal

Abstract In this study, polyaniline (PANI) is prepared by means of chemical oxidization polymerization and directly loaded on the modified fiber ball (m-FB) to obtain macroscale polyaniline/modified fiber ball (PANI/m-FB) composite, and then its removal ability of Cr(VI) is investigated. The effects of different parameters such as contact time, pH value and initial concentration on Cr(VI) removal efficiency are discussed. The experimental results illustrate that the favorable pH value is 5.0 and the maximum removal capacity is measured to be 293.13 mg g−1. Besides, PANI/m-FB composites can be regenerated and reused after being treated with strong acid. The kinetic study indicates that the adsorption procedure is mainly controlled by chemical adsorption. More importantly, the macroscale of composites can avoid secondary pollution efficiently. Benefiting from the low cost, easy preparation in large scale, environmentally friendly, excellent recycling performance as well as high removal ability, PANI/m-FB composites exhibit a potential possibility to remove Cr(VI) from industrial waste water. Graphic Abstract The polyaniline (PANI) was coated on modified fiber ball (m-FB) to remove Cr(VI) in waste water, and this kind of PANI/m-FB composites can avoid secondary pollution efficiently due to its macrostructure. Furthermore, the removal capacity can reach to 291.13 mg/g and can be multiple reused.

scholarly journals Effects of Ag contents on the microstructure and SERS performance of self-grown Ag nanoparticles/Mo–Ag alloy films

2020 ◽  
Vol 9 (1) ◽  
pp. 751-759 ◽  
Author(s):  
Xinxin Lian ◽  
Yuanjiang Lv ◽  
Haoliang Sun ◽  
David Hui ◽  
Guangxin Wang
Keyword(s):  
Ag Nanoparticles ◽  
Large Scale ◽  
Low Cost ◽  
Film Surface ◽  
Time Domain Analysis ◽  
Alloy Film ◽  
Scale Production ◽  
Alloy Films ◽  
Surface Enhanced Raman ◽  
Ag Film

AbstractAg nanoparticles/Mo–Ag alloy films with different Ag contents were prepared on polyimide by magnetron sputtering. The effects of Ag contents on the microstructure of self-grown Ag nanoparticles/Mo–Ag alloy films were investigated using XRD, FESEM, EDS and TEM. The Ag content plays an important role in the size and number of uniformly distributed Ag nanoparticles spontaneously formed on the Mo–Ag alloy film surface, and the morphology of the self-grown Ag nanoparticles has changed significantly. Additionally, it is worth noting that the Ag nanoparticles/Mo–Ag alloy films covered by a thin Ag film exhibits highly sensitive surface-enhanced Raman scattering (SERS) performance. The electric field distributions were calculated using finite-difference time-domain analysis to further prove that the SERS enhancement of the films is mainly determined by “hot spots” in the interparticle gap between Ag nanoparticles. The detection limit of the Ag film/Ag nanoparticles/Mo–Ag alloy film for Rhodamine 6G probe molecules was 5 × 10−14 mol/L. Therefore, the novel type of the Ag film/Ag nanoparticles/Mo–Ag alloy film can be used as an ideal SERS-active substrate for low-cost and large-scale production.

SateLoc: A Virtual Fingerprinting Approach to Outdoor LoRa Localization Using Satellite Images

2021 ◽  
Vol 17 (4) ◽  
pp. 1-28
Author(s):  
Yuxiang Lin ◽  
Wei Dong ◽  
Yi Gao ◽  
Tao Gu
Keyword(s):  
Land Cover ◽  
Large Scale ◽  
Satellite Images ◽  
Low Cost ◽  
Tracking Error ◽  
Location Based Services ◽  
Distance Constraint ◽  
Combination Strategy ◽  
Land Cover Types ◽  
High Resolution Satellite Images

With the increasing relevance of the Internet of Things and large-scale location-based services, LoRa localization has been attractive due to its low-cost, low-power, and long-range properties. However, existing localization approaches based on received signal strength indicators are either easily affected by signal fading of different land-cover types or labor intensive. In this work, we propose SateLoc, a LoRa localization system that utilizes satellite images to generate virtual fingerprints. Specifically, SateLoc first uses high-resolution satellite images to identify land-cover types. With the path loss parameters of each land-cover type, SateLoc can automatically generate a virtual fingerprinting map for each gateway. We then propose a novel multi-gateway combination strategy, which is weighted by the environmental interference of each gateway, to produce a joint likelihood distribution for localization and tracking. We implement SateLoc with commercial LoRa devices without any hardware modification, and evaluate its performance in a 227,500-m urban area. Experimental results show that SateLoc achieves a median localization error of 43.5 m, improving more than 50% compared to state-of-the-art model-based approaches. Moreover, SateLoc can achieve a median tracking error of 37.9 m with the distance constraint of adjacent estimated locations. More importantly, compared to fingerprinting-based approaches, SateLoc does not require the labor-intensive fingerprint acquisition process.

Sign in / Sign up

Export Citation Format

Share Document