scholarly journals Ultrananocrystalline diamond-coated nanoporous membranes support SK-N-SH neuroblastoma endothelial cell attachment

2018 ◽  
Vol 8 (3) ◽  
pp. 20170063 ◽  
Author(s):  
Kai-Hung Yang ◽  
Alexander K. Nguyen ◽  
Peter L. Goering ◽  
Anirudha V. Sumant ◽  
Roger J. Narayan
Keyword(s):  
Electron Microscopy ◽  
Silicon Nitride ◽  
Single Molecule ◽  
Photoelectron Spectroscopy ◽  
Biomedical Applications ◽  
Cell Attachment ◽  
Nanoporous Membranes ◽  
Free Standing ◽  
Tissue Engineering Scaffolds ◽  
Ultrananocrystalline Diamond

Ultrananocrystalline diamond (UNCD) has been demonstrated to have attractive features for biomedical applications and can be combined with nanoporous membranes for applications in drug delivery systems, biosensing, immunoisolation and single molecule analysis. In this study, free-standing nanoporous UNCD membranes with pore sizes of 100 or 400 nm were fabricated by directly depositing ultrathin UNCD films on nanoporous silicon nitride membranes and then etching away silicon nitride using reactive ion etching. Successful deposition of UNCD on the substrate with a novel process was confirmed with Raman spectroscopy, X-ray photoelectron spectroscopy, cross-section scanning electron microscopy (SEM) and transmission electron microscopy. Both sample types exhibited uniform geometry and maintained a clear hexagonal pore arrangement. Cellular attachment of SK-N-SH neuroblastoma endothelial cells was examined using confocal microscopy and SEM. Attachment of SK-N-SH cells onto UNCD membranes on both porous regions and solid surfaces was shown, indicating the potential use of UNCD membranes in biomedical applications such as biosensors and tissue engineering scaffolds.

scholarly journals Synthesis and Evaluation of AlgNa-g-poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

2021 ◽  
Vol 22 (11) ◽  
pp. 5730
Author(s):  
Jomarien García-Couce ◽  
Marioly Vernhes ◽  
Nancy Bada ◽  
Lissette Agüero ◽  
Oscar Valdés ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Controlled Release ◽  
Biomedical Applications ◽  
Release Kinetics ◽  
Cell Types ◽  
Tissue Engineering Scaffolds ◽  
Almost All ◽  
Scanning Electron

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

scholarly journals Development of 3D Bioactive Nanocomposite Scaffolds Made from Gelatin and Nano Bioactive Glass for Biomedical Applications

2010 ◽  
Vol 19 (2) ◽  
pp. 096369351001900 ◽  
Author(s):  
M. Mozafari ◽  
F. Moztarzadeh ◽  
M. Rabiee ◽  
M. Azami ◽  
N. Nezafati ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bioactive Glass ◽  
Biomedical Applications ◽  
Cell Attachment ◽  
Tissue Engineering Scaffolds ◽  
Study Results ◽  
Nanocomposite Scaffold ◽  
Nanocomposite Scaffolds ◽  
First Time

In this research, macroporous, mechanically competent and bioactive nanocomposite scaffolds have been fabricated from cross-linked gelatine (Gel) and nano bioactive glass (nBG) through layer solvent casting combined with freeze-drying and lamination techniques. This study has developed a new composition to produce a new bioactive nanocomposite which is porous with interconnected microstructure, pore sizes are 200-500 μm, porosity are 72%-86%. Also, we have reported formation of chemical bonds between nBG and Gel for the first time. Finally, the in vitro cytocompatability of the scaffolds was assessed using MTT assay and cell attachment study. Results indicated no sign of toxicity and cells found to be attached to the pore walls offered by the scaffolds. These results suggested that the developed nanocomposite scaffold possess the prerequisites for bone tissue engineering scaffolds and it can be used for tissue engineering applications.

Reoxidation of silicon nitride studied using x-ray photoelectron spectroscopy and transmission electron microscopy

2004 ◽  
Vol 95 (1) ◽  
pp. 367-372 ◽  
Author(s):  
Damien Gilmore ◽  
Will Z. Cai ◽  
Dorai Iyer ◽  
Rebecca Burgin ◽  
Guy Averett ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Silicon Nitride ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Transmission Electron

scholarly journals Fabrication of Si3N4@Si@Cu Thin Films by RF Sputtering as High Energy Anode Material for Li-Ion Batteries

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2824
Author(s):  
Hocine Merabet ◽  
Yannis De Luna ◽  
Khadiga Mohamed ◽  
Nasr Bensalah
Keyword(s):  
Electron Microscopy ◽  
Silicon Nitride ◽  
Magnetron Sputtering ◽  
Electrochemical Performance ◽  
Anode Material ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray ◽  
Practical Applications ◽  
Li Ion

Silicon and silicon nitride (Si3N4) are some of the most appealing candidates as anode materials for LIBs (Li-ion battery) due to their favorable characteristics: low cost, abundance of Si, and high theoretical capacity. However, these materials have their own set of challenges that need to be addressed for practical applications. A thin film consisting of silicon nitride-coated silicon on a copper current collector (Si3N4@Si@Cu) has been prepared in this work via RF magnetron sputtering (Radio Frequency magnetron sputtering). The anode material was characterized before and after cycling to assess the difference in appearance and composition using XRD (X-ray Powder Diffraction), XPS (X-ray Photoelectron Spectroscopy), SEM/EDX (Scanning Electron Microscopy/ Energy Dispersive X-Ray Analysis), and TEM (Transmission Electron Microscopy). The effect of the silicon nitride coating on the electrochemical performance of the anode material for LIBs was evaluated against Si@Cu film. It has been found that the Si3N4@Si@Cu anode achieved a higher capacity retention (90%) compared to Si@Cu (20%) after 50 cycles in a half-cell versus Li+/Li, indicating a significant improvement in electrochemical performance. In a full cell, the Si3N4@Si@Cu anode achieved excellent efficiency and acceptable specific capacities, which can be enhanced with further research.

Free-Standing Lipid Bilayers Based on Nanopore Array and Ion Channel Formation

2019 ◽  
Vol 19 (11) ◽  
pp. 7149-7155
Author(s):  
Shengwei Tan ◽  
Ling Zhang ◽  
Lijuan Yu ◽  
Lei Xu
Keyword(s):  
Silicon Nitride ◽  
Ion Channel ◽  
Lipid Bilayers ◽  
Single Molecule ◽  
Protein Function ◽  
Lipid Membranes ◽  
Membrane Resistance ◽  
Label Free ◽  
Free Standing ◽  
Membrane Lifetime

Integrated nanopores are novel and versatile single-molecule sensors for individual label-free biopolymer detection and characterization. However, their studies and application requires a stable lipid bilayer to maintain protein function. Herein, we describe a method for producing lipid bilayers across a nanopore array on a silicon nitride substrate. We used a painting technique commonly used with Teflon films to embed α-hemolysin (α-HL) into bilayer lipid membranes (BLMs) to form an ion channel. This was carried out in nanofluid developed in our lab. The membrane formation process, stability of BLMs and ion channel recordings were monitored by patch clamp in real-time. BLM formation was demonstrated by electrical recording (<10 pS conductance) of suspended lipid bilayers spanning a nanopore in the range of ±100 mV. Membrane resistance (Rm) and capacitance (Cm) of the device with the bilayer were assessed by membrane test as above 1.0 GΩ and ~20±2 pF, respectively. The silicon nitride surface and aperture edge were smooth at the nanometer lever leading to remarkable membrane stability. The membrane lifetime was 5–24 h. A single α-HL channel inserted in 30–60 min applied a potential of +100 mV. The α-HL channel currents were recorded at ~100±10 pA. Such integrated nanopores enable analysis of channel functions under various solution conditions from the same BLM. This will open up a variety of applications for ion channels including high-throughput medical screening and diagnosis.

scholarly journals Correction to ‘Ultrananocrystalline diamond-coated nanoporous membranes support SK-N-SH neuroblastoma endothelial cell attachment’

2019 ◽  
Vol 9 (2) ◽  
pp. 20180073
Author(s):  
Kai-Hung Yang ◽  
Alexander K. Nguyen ◽  
Peter L. Goering ◽  
Anirudha V. Sumant ◽  
Roger J. Narayan
Keyword(s):  
Endothelial Cell ◽  
Cell Attachment ◽  
Nanoporous Membranes ◽  
Ultrananocrystalline Diamond ◽  
Endothelial Cell Attachment

Electron Microscopy of Silicon Nitride-Based Ceramics

1991 ◽  
Vol 49 ◽  
pp. 926-927
Author(s):  
Gareth Thomas
Keyword(s):  
Electron Microscopy ◽  
High Temperature ◽  
Silicon Nitride ◽  
World Wide ◽  
Sintering Temperature ◽  
Liquid Phase Sintering ◽  
High Temperature Strength ◽  
Sintering Additives ◽  
Glass Forming ◽  
Dense Product

Silicon nitride and silicon nitride based-ceramics are now well known for their potential as hightemperature structural materials, e.g. in engines. However, as is the case for many ceramics, in order to produce a dense product, sintering additives are utilized which allow liquid-phase sintering to occur; but upon cooling from the sintering temperature residual intergranular phases are formed which can be deleterious to high-temperature strength and oxidation resistance, especially if these phases are nonviscous glasses. Many oxide sintering additives have been utilized in processing attempts world-wide to produce dense creep resistant components using Si3N4 but the problem of controlling intergranular phases requires an understanding of the glass forming and subsequent glass-crystalline transformations that can occur at the grain boundaries.

Investigation of Polyoxometalate-(Poly)pyrrole Heterogeneous Nanostructures as Cathodes for Rechargeable Magnesium-Ion Batteries

2018 ◽  
Author(s):  
Hakeem K. Henry ◽  
Sang Bok Lee
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Active Material ◽  
Conductive Polymer ◽  
Current Collector ◽  
Constant Current ◽  
Anodized Aluminum ◽  
Transmission Electron ◽  
Pyrrole Monomer

The PMo<sub>12</sub>-PPy heterogeneous cathode was synthesized electrochemically. In doing so, the PMo<sub>12</sub> redox-active material was impregnated throughout the conductive polymer matrix of the poly(pyrrole) nanowires. All chemicals and reagents used were purchased from Sigma-Aldrich. Anodized aluminum oxide (AAO) purchased from Whatman served as the porous hard template for nanowire deposition. A thin layer of gold of approximately 200nm was sputtered onto the disordered side of the AAO membrane to serve as the current collector. Copper tape was connected to the sputtered gold for contact and the device was sealed in parafilm with heat with an exposed area of 0.32 cm<sup>2</sup> to serve as the electroactive area for deposition. All electrochemical synthesis and experiments were conducted using a Bio-Logic MPG2 potentiostat. The deposition was carried out using a 3-electrode beaker cell setup with a solution of acetonitrile containing 5mM and 14mM of the phosphomolybdic acid and pyrrole monomer, respectively. The synthesis was achieved using chronoamperometry to apply a constant voltage of 0.8V vs. Ag/AgCl (BASi) to oxidatively polymerize the pyrrole monomer to poly(pyrrole). To prevent the POM from chemically polymerizing the pyrrole, an injection method was used in which the pyrrole monomer was added to the POM solution only after the deposition voltage had already been applied. The deposition was well controlled by limiting the amount of charge transferred to 300mC. Following deposition, the AAO template was removed by soaking in 3M sodium hydroxide (NaOH) for 20 minutes and rinsed several times with water. After synthesis, all cathodes underwent electrochemical testing to determine their performance using cyclic voltammetry and constant current charge-discharge cycling in 0.1 M Mg(ClO<sub>4</sub>)<sub>2</sub>/PC electrolyte. The cathodes were further characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and x-ray photoelectron spectroscopy (XPS).

Antibacterial silver-diatomite nanocomposite ceramic with low silver release

2019 ◽  
Vol 20 (2) ◽  
pp. 633-643
Author(s):  
Xiaopeng Qi ◽  
Junwei Chen ◽  
Qian Li ◽  
Hui Yang ◽  
Honghui Jiang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Water Treatment ◽  
Photoelectron Spectroscopy ◽  
Bactericidal Effect ◽  
Ceramic Filter ◽  
Ceramic Filters ◽  
X Ray ◽  
E Coli ◽  
Point Of Use ◽  
Silver Release

Abstract There is an urgent need for an effective and long-lasting ceramic filter for point-of-use water treatment. In this study, silver-diatomite nanocomposite ceramic filters were developed by an easy and effective method. The ceramic filters have a three-dimensional interconnected pore structure and porosity of 50.85%. Characterizations of the silver-diatomite nanocomposite ceramic filters were performed using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Silver nanoparticles were confirmed to be formed in situ in the ceramic filter. The highest silver concentration in water was 0.24 μg/L and 2.1 μg/L in short- and long-term experiments, indicating very low silver-release properties of silver-diatomite nanocomposite ceramic filter. The nanocomposite ceramics show strong bactericidal activity. When contact time with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) of 105 colony forming units (CFU)/mL exceeded 3 h, the bactericidal rates of the four different silver content ceramics against E. coli and S. aureus were all 100%. Strong bactericidal effect against E. coli with initial concentration of 109 CFU/mL were also observed in ceramic newly obtained and ceramic immersed in water for 270 days, demonstrating its high stability. The silver-diatomite nanocomposite ceramic filters could be a promising candidate for point-of-use water treatment.

scholarly journals Phytosynthetic Fabrication of Lanthanum Ion-Doped Nickel Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Anti-Microbial Properties

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 124
Author(s):  
Srihasam Saiganesh ◽  
Thyagarajan Krishnan ◽  
Golla Narasimha ◽  
Hesham S. Almoallim ◽  
Sulaiman Ali Alhari ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Rare Earth ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Nio Nanoparticles ◽  
X Ray ◽  
Sesbania Grandiflora

Over the past few years, the photogenic fabrication of metal oxide nanoparticles has attracted considerable attention, owing to the simple, eco-friendly, and non-toxic procedure. Herein, we fabricated NiO nanoparticles and altered their optical properties by doping with a rare earth element (lanthanum) using Sesbania grandiflora broth for antibacterial applications. The doping of lanthanum with NiO was systematically studied. The optical properties of the prepared nanomaterials were investigated through UV-Vis diffuse reflectance spectra (UV-DRS) analysis, and their structures were studied using X-ray diffraction analysis. The morphological features of the prepared nanomaterials were examined by scanning electron microscopy and transmission electron microscopy, their elemental structure was analyzed by energy-dispersive X-ray spectral analysis, and their oxidation states were analyzed by X-ray photoelectron spectroscopy. Furthermore, the antibacterial action of NiO and La-doped NiO nanoparticles was studied by the zone of inhibition method for Gram-negative and Gram-positive bacterial strains such as Escherichia coli and Bacillus sublitis. It was evident from the obtained results that the optimized compound NiOLa-04 performed better than the other prepared compounds. To the best of our knowledge, this is the first report on the phytosynthetic fabrication of rare-earth ion Lanthanum (La3+)-doped Nickel Oxide (NiO) nanoparticles and their anti-microbial studies.

Sign in / Sign up

Export Citation Format

Share Document