scholarly journals The Genetic Basis of the Interspecific Differences in Wing Size in Nasonia (Hymenoptera; Pteromalidae): Major Quantitative Trait Loci and Epistasis

Genetics ◽  
2002 ◽  
Vol 161 (2) ◽  
pp. 673-684
Author(s):  
J Gadau ◽  
R E Page ◽  
J H Werren
Keyword(s):  
Quantitative Trait Loci ◽  
Qtl Analysis ◽  
Quantitative Trait ◽  
Wing Length ◽  
Size Difference ◽  
Phenotypic Variance ◽  
Wing Size ◽  
Epistatic Interactions ◽  
Trait Loci ◽  
Wing Width

Abstract There is a 2.5-fold difference in male wing size between two haplodiploid insect species, Nasonia vitripennis and N. giraulti. The haploidy of males facilitated a full genomic screen for quantitative trait loci (QTL) affecting wing size and the detection of epistatic interactions. A QTL analysis of the interspecific wing-size difference revealed QTL with major effects and epistatic interactions among loci affecting the trait. We analyzed 178 hybrid males and initially found two major QTL for wing length, one for wing width, three for a normalized wing-size variable, and five for wing seta density. One QTL for wing width explains 38.1% of the phenotypic variance, and the same QTL explains 22% of the phenotypic variance in normalized wing size. This corresponds to a region previously introgressed from N. giraulti into N. vitripennis that accounts for 44% of the normalized wing-size difference between the species. Significant epistatic interactions were also found that affect wing size and density of setae on the wing. Screening for pairwise epistatic interactions between loci on different linkage groups revealed four additional loci for wing length and four loci for normalized wing size that were not detected in the original QTL analysis. We propose that the evolution of smaller wings in N. vitripennis males is primarily the result of major mutations at few genomic regions and involves epistatic interactions among some loci.

scholarly journals Quantitative Trait Loci Affecting Survival and Fertility-Related Traits in Caenorhabditis elegans Show Genotype-Environment Interactions, Pleiotropy and Epistasis

Genetics ◽  
1999 ◽  
Vol 153 (3) ◽  
pp. 1233-1243 ◽  
Author(s):  
David R Shook ◽  
Thomas E Johnson
Keyword(s):  
Caenorhabditis Elegans ◽  
Quantitative Trait Loci ◽  
Population Growth ◽  
Quantitative Trait ◽  
Age Of Onset ◽  
Inbred Strains ◽  
Interval Mapping ◽  
Phenotypic Variance ◽  
Epistatic Interactions ◽  
Trait Loci

Abstract We have identified, using composite interval mapping, quantitative trait loci (QTL) affecting a variety of life history traits (LHTs) in the nematode Caenorhabditis elegans. Using recombinant inbred strains assayed on the surface of agar plates, we found QTL for survival, early fertility, age of onset of sexual maturity, and population growth rate. There was no overall correlation between survival on solid media and previous measures of survival in liquid media. Of the four survival QTL found in these two environments, two have genotype-environment interactions (GEIs). Epistatic interactions between markers were detected for four traits. A multiple regression approach was used to determine which single markers and epistatic interactions best explained the phenotypic variance for each trait. The amount of phenotypic variance accounted for by genetic effects ranged from 13% (for internal hatching) to 46% (for population growth). Epistatic effects accounted for 9–11% of the phenotypic variance for three traits. Two regions containing QTL that affected more than one fertility-related trait were found. This study serves as an example of the power of QTL mapping for dissecting the genetic architecture of a suite of LHTs and indicates the potential importance of environment and GEIs in the evolution of this architecture.

scholarly journals Quantitative Trait Loci Associated with Rotylenchulus reniformis Host Suitability in Soybean

2020 ◽  
Vol 110 (9) ◽  
pp. 1511-1521
Author(s):  
Juliet Wilkes ◽  
Christopher Saski ◽  
Mariola Klepadlo ◽  
Benjamin Fallen ◽  
Paula Agudelo
Keyword(s):  
Quantitative Trait Loci ◽  
Qtl Analysis ◽  
Quantitative Trait ◽  
The United States ◽  
Host Suitability ◽  
Reniform Nematode ◽  
Rotylenchulus Reniformis ◽  
Chromosome 18 ◽  
Nematode Reproduction ◽  
Trait Loci

Reniform nematode (Rotylenchulus reniformis) is a yield-limiting pathogen of soybean (Glycine max) in the southeastern region of the United States. A population of 250 recombinant inbred lines (RIL) (F2:8) developed from a cross between reniform nematode resistant soybean cultivar Forrest and susceptible cultivar Williams 82 was utilized to identify regions associated with host suitability. A genetic linkage map was constructed using single-nucleotide polymorphism markers generated by genotyping-by-sequencing. The phenotype was measured in the RIL population and resistance was characterized using normalized and transformed nematode reproduction indices in an optimal univariate cluster analysis. Quantitative trait loci (QTL) analysis using normalized phenotype scores identified two QTLs on each arm of chromosome 18 (rrn-1 and rrn-2). The same QTL analysis performed with log10(x) transformed phenotype data also identified two QTLs: one on chromosome 18 overlapping the same region in the other analysis (rrn-1), and one on chromosome 11 (rrn-3). While rrn-1 and rrn-3 have been reported associated with reduced reproduction of reniform nematode, this is the first report of the rrn-2 region associated with host suitability to reniform nematode. The resistant parent allele at rrn-2 showed an inverse relationship with the resistance phenotype, correlating with an increase in nematode reproduction or host suitability. Several candidate genes within these regions corresponded with host plant defense systems. Interestingly, a characteristic pathogen resistance gene with a leucine-rich repeat was discovered within rrn-2. These genetic markers can be used by soybean breeders in marker-assisted selection to develop lines with resistance to reniform nematode.

scholarly journals On the Differences Between Maximum Likelihood and Regression Interval Mapping in the Analysis of Quantitative Trait Loci

Genetics ◽  
2000 ◽  
Vol 156 (2) ◽  
pp. 855-865 ◽  
Author(s):  
Chen-Hung Kao
Keyword(s):  
Quantitative Trait Loci ◽  
Maximum Likelihood ◽  
Qtl Mapping ◽  
Quantitative Trait ◽  
Mean Squared Error ◽  
Interval Mapping ◽  
Size Difference ◽  
Ratio Test ◽  
Trait Loci ◽  
Variance Explained

AbstractThe differences between maximum-likelihood (ML) and regression (REG) interval mapping in the analysis of quantitative trait loci (QTL) are investigated analytically and numerically by simulation. The analytical investigation is based on the comparison of the solution sets of the ML and REG methods in the estimation of QTL parameters. Their differences are found to relate to the similarity between the conditional posterior and conditional probabilities of QTL genotypes and depend on several factors, such as the proportion of variance explained by QTL, relative QTL position in an interval, interval size, difference between the sizes of QTL, epistasis, and linkage between QTL. The differences in mean squared error (MSE) of the estimates, likelihood-ratio test (LRT) statistics in testing parameters, and power of QTL detection between the two methods become larger as (1) the proportion of variance explained by QTL becomes higher, (2) the QTL locations are positioned toward the middle of intervals, (3) the QTL are located in wider marker intervals, (4) epistasis between QTL is stronger, (5) the difference between QTL effects becomes larger, and (6) the positions of QTL get closer in QTL mapping. The REG method is biased in the estimation of the proportion of variance explained by QTL, and it may have a serious problem in detecting closely linked QTL when compared to the ML method. In general, the differences between the two methods may be minor, but can be significant when QTL interact or are closely linked. The ML method tends to be more powerful and to give estimates with smaller MSEs and larger LRT statistics. This implies that ML interval mapping can be more accurate, precise, and powerful than REG interval mapping. The REG method is faster in computation, especially when the number of QTL considered in the model is large. Recognizing the factors affecting the differences between REG and ML interval mapping can help an efficient strategy, using both methods in QTL mapping to be outlined.

Quantitative Trait Loci for Susceptibility to Tapeworm Infection in the Red Flour Beetle

Genetics ◽  
2003 ◽  
Vol 165 (3) ◽  
pp. 1307-1315
Author(s):  
Daibin Zhong ◽  
Aditi Pai ◽  
Guiyun Yan
Keyword(s):  
Quantitative Trait Loci ◽  
Quantitative Trait ◽  
Genetic Basis ◽  
Life Cycles ◽  
Red Flour Beetle ◽  
Phenotypic Variance ◽  
Flour Beetle ◽  
Trait Loci ◽  
Host Ecology ◽  
Tapeworm Infection

Abstract Parasites have profound effects on host ecology and evolution, and the effects of parasites on host ecology are often influenced by the magnitude of host susceptibility to parasites. Many parasites have complex life cycles that require intermediate hosts for their transmission, but little is known about the genetic basis of the intermediate host's susceptibility to these parasites. This study examined the genetic basis of susceptibility to a tapeworm (Hymenolepis diminuta) in the red flour beetle (Tribolium castaneum) that serves as an intermediate host in its transmission. Quantitative trait loci (QTL) mapping experiments were conducted with two independent segregating populations using amplified fragment length polymorphism (AFLP) markers and randomly amplified polymorphic DNA (RAPD) markers. A total of five QTL that significantly affected beetle susceptibility were identified in the two reciprocal crosses. Two common QTL on linkage groups 3 and 6 were identified in both crosses with similar effects on the phenotype, and three QTL were unique to each cross. In one cross, the three main QTL accounted for 29% of the total phenotypic variance and digenic epistasis explained 39% of the variance. In the second cross, the four main QTL explained 62% of the variance and digenic epistasis accounted for only 5% of the variance. The actions of these QTL were either overdominance or underdominance. Our results suggest that the polygenic nature of beetle susceptibility to the parasites and epistasis are important genetic mechanisms for the maintenance of variation within or among beetle strains in susceptibility to tapeworm infection.

Quantitative Trait Loci Affecting Differences in Floral Morphology Between Two Species of Monkeyflower (Mimulus)

Genetics ◽  
1998 ◽  
Vol 149 (1) ◽  
pp. 367-382 ◽  
Author(s):  
H D Bradshaw ◽  
Kevin G Otto ◽  
Barbara E Frewen ◽  
John K McKay ◽  
Douglas W Schemske
Keyword(s):  
Quantitative Trait Loci ◽  
Reproductive Isolation ◽  
Quantitative Trait ◽  
Floral Morphology ◽  
Cumulative Effect ◽  
Sympatric Species ◽  
Accurate Estimate ◽  
Phenotypic Variance ◽  
Trait Loci ◽  
Morphological Differences

Abstract Conspicuous differences in floral morphology are partly responsible for reproductive isolation between two sympatric species of monkeyflower because of their effect on visitation of the flowers by different pollinators. Mimulus lewisii flowers are visited primarily by bumblebees, whereas M. cardinalis flowers are visited mostly by hummingbirds. The genetic control of 12 morphological differences between the flowers of M. lewisii and M. cardinalis was explored in a large linkage mapping population of F2 plants (n = 465) to provide an accurate estimate of the number and magnitude of effect of quantitative trait loci (QTLs) governing each character. Between one and six QTLs were identified for each trait. Most (9/12) traits appear to be controlled in part by at least one major QTL explaining ≥25% of the total phenotypic variance. This implies that either single genes of individually large effect or linked clusters of genes with a large cumulative effect can play a role in the evolution of reproductive isolation and speciation.

scholarly journals Meta-Analysis of Quantitative Trait Loci Associated with Seedling-Stage Salt Tolerance in Rice (Oryza sativa L.)

Plants ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 33 ◽  
Author(s):  
Md. Islam ◽  
John Ontoy ◽  
Prasanta Subudhi
Keyword(s):  
Quantitative Trait Loci ◽  
Salt Tolerance ◽  
Candidate Genes ◽  
Quantitative Trait ◽  
Oryza Sativa L ◽  
Meta Analysis ◽  
Seedling Stage ◽  
Phenotypic Variance ◽  
A Genome ◽  
Trait Loci

Soil and water salinity is one of the major abiotic stresses that reduce growth and productivity in major food crops including rice. The lack of congruence of salt tolerance quantitative trait loci (QTLs) in multiple genetic backgrounds and multiple environments is a major hindrance for undertaking marker-assisted selection (MAS). A genome-wide meta-analysis of QTLs controlling seedling-stage salt tolerance was conducted in rice using QTL information from 12 studies. Using a consensus map, 11 meta-QTLs for three traits with smaller confidence intervals were localized on chromosomes 1 and 2. The phenotypic variance of 3 meta-QTLs was ≥20%. Based on phenotyping of 56 diverse genotypes and breeding lines, six salt-tolerant genotypes (Bharathy, I Kung Ban 4-2 Mutant, Langmanbi, Fatehpur 3, CT-329, and IARI 5823) were identified. The perusal of the meta-QTL regions revealed several candidate genes associated with salt-tolerance attributes. The lack of association between meta-QTL linked markers and the level of salt tolerance could be due to the low resolution of meta-QTL regions and the genetic complexity of salt tolerance. The meta-QTLs identified in this study will be useful not only for MAS and pyramiding, but will also accelerate the fine mapping and cloning of candidate genes associated with salt-tolerance mechanisms in rice.

scholarly journals Detection of Quantitative Trait Loci (QTL) Associated with the Fruit Morphology of Tomato

Genes ◽  
2020 ◽  
Vol 11 (10) ◽  
pp. 1117
Author(s):  
Pragya Adhikari ◽  
James McNellie ◽  
Dilip R. Panthee
Keyword(s):  
Quantitative Trait Loci ◽  
Quantitative Trait ◽  
Recombinant Inbred Lines ◽  
Tomato Fruit ◽  
Snp Array ◽  
Fruit Shape ◽  
Phenotypic Variance ◽  
Fruit Morphology ◽  
Trait Loci ◽  
Shape And Size

Tomato (Solanum lycopersicum L.) is the second most-consumed vegetable in the world. The market value and culinary purpose of tomato are often determined by fruit size and shape, which makes the genetic improvement of these traits a priority for tomato breeders. The main objective of the study was to detect quantitative trait loci (QTL) associated with the tomato fruit shape and size. The use of elite breeding materials in the genetic mapping studies will facilitate the detection of genetic loci of direct relevance to breeders. We performed QTL analysis in an intra-specific population of tomato developed from a cross between two elite breeding lines NC 30P × NC-22L-1(2008) consisting of 110 recombinant inbred lines (RIL). The precision software Tomato Analyzer (TA) was used to measure fruit morphology attributes associated with fruit shape and size traits. The RIL population was genotyped with the SolCAP 7720 SNP array. We identified novel QTL controlling elongated fruit shape on chromosome 10, explaining up to 24% of the phenotypic variance. This information will be useful in improving tomato fruit morphology traits.

scholarly journals Quantitative Trait Loci Mapping for Adult-Plant Resistance to Powdery Mildew in Bread Wheat

2006 ◽  
Vol 96 (7) ◽  
pp. 784-789 ◽  
Author(s):  
S. S. Liang ◽  
K. Suenaga ◽  
Z. H. He ◽  
Z. L. Wang ◽  
H. Y. Liu ◽  
...  
Keyword(s):  
Quantitative Trait Loci ◽  
Powdery Mildew ◽  
Plant Resistance ◽  
Quantitative Trait ◽  
Powdery Mildew Resistance ◽  
Adult Plant Resistance ◽  
Adult Plant ◽  
Phenotypic Variance ◽  
Mildew Resistance ◽  
Trait Loci

Powdery mildew, caused by Blumeria graminis f. sp. tritici, is a major disease to wheat (Triticum aestivum) worldwide. Use of adult-plant resistance (APR) is an effective method to develop wheat cultivars with durable resistance to powdery mildew. In the present study, 432 molecular markers were used to map quantitative trait loci (QTL) for APR to powdery mildew in a doubled haploid (DH) population with 107 lines derived from the cross Fukuho-komugi × Oligoculm. Field trials were conducted in Beijing and Anyang, China during 2003-2004 and 2004-2005 cropping seasons, respectively. The DH lines were planted in a randomized complete block design with three replicates. Artificial inoculation was carried out in Beijing with highly virulent isolate E20 of B. graminis f. sp. tritici and the powdery mildew severity on penultimate leaf was evaluated four times, and the maximum disease severity (MDS) on penultimate leaf was investigated in Anyang under natural inoculation in May 2004 and 2005. The heritability of resistance to powdery mildew for MDS in 2 years and two locations ranged from 0.82 to 0.93, while the heritability for area under the disease progress curve was between 0.84 and 0.91. With the method of composite interval mapping, four QTL for APR to powdery mildew were detected on chromosomes 1AS, 2BL, 4BL, and 7DS, explaining 5.7 to 26.6% of the phenotypic variance. Three QTL on chromosomes 1AS, 2BL, and 7DS were derived from the female, Fukuho-komugi, while the one on chromosome 4BL was from the male, Oligoculm. The QTL on chromosome 1AS showed high genetic effect on powdery mildew resistance, accounting for 19.5 to 26.6% of phenotypic variance across two environments. The QTL on 7DS associated with the locus Lr34/Yr18, flanked by microsatellite Xgwm295.1 and Ltn (leaf tip necrosis). These results will benefit for improving powdery mildew resistance in wheat breeding programs.

Sign in / Sign up

Export Citation Format

Share Document