The Euler number

1989 ◽  
pp. 9-21
Author(s):  
Michael Freedman ◽  
Feng Luo
Keyword(s):  
Euler Number

scholarly journals Numerical Analysis of Flow across Brush Elements Based on a 2-D Staggered Tube Banks Model

Aerospace ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 19
Author(s):  
Xiaolei Song ◽  
Meihong Liu ◽  
Xiangping Hu ◽  
Xueliang Wang ◽  
Taohong Liao ◽  
...  
Keyword(s):  
Euler Number ◽  
Dynamic Pressure ◽  
Labyrinth Seals ◽  
System A ◽  
Brush Seal ◽  
Back Plate ◽  
Computational Fluid Dynamics Cfd ◽  
Secondary Air ◽  
Tube Banks ◽  
Gas Expansion

In order to improve efficiency in turbomachinery, brush seal replaces labyrinth seals widely in the secondary air system. A 2-d staggered tube bank model is adopted to simulate the gas states and the pressure character in brush seal, and computational fluid dynamics (CFD) is used to solve the model in this paper. According to the simulation results, the corrected formula of the Euler number and dimensionless pressure are given. The results show that gas expands when flow through the bristle pack, and the gas expansion closes to an isotherm process. The dynamic pressure increases with decreasing static pressure. The Euler number can reflect the seal performance of brush seals in leakage characteristics. Compared with increasing the number of rows, the reduction of the gap is a higher-efficiency method to increase the Euler number. The Euler number continually increases as the gap decreases. However, with the differential pressure increasing, Euler number first increases and then decreases as the number of rows increases. Finally, the pressure distribution on the surface of end rows is asymmetric, and it may increase the friction between the bristles and the back plate.

scholarly journals On S-class number relations of algebraic tori in Galois extensions of global fields

1991 ◽  
Vol 124 ◽  
pp. 133-144 ◽  
Author(s):  
Masanori Morishita
Keyword(s):  
Class Number ◽  
Quadratic Forms ◽  
Euler Number ◽  
Number Fields ◽  
Binary Quadratic Forms ◽  
Algebraic Number Fields ◽  
Algebraic Tori ◽  
Genus Theory ◽  
Class Number Formula ◽  
Number Formula

As an interpretation and a generalization of Gauss’ genus theory on binary quadratic forms in the language of arithmetic of algebraic tori, Ono [02] established an equality between a kind of “Euler number E(K/k)” for a finite Galois extension K/k of algebraic number fields and other arithmetical invariants associated to K/k. His proof depended on his Tamagawa number formula [01] and Shyr’s formula [Sh] which follows from the analytic class number formula of a torus. Later, two direct proofs were given by Katayama [K] and Sasaki [Sa].

scholarly journals Chern Class Inequalities on Polarized Manifolds and Nef Vector Bundles

2020 ◽  
Author(s):  
Ping Li ◽  
Fangyang Zheng
Keyword(s):  
Chern Class ◽  
Vector Bundles ◽  
Euler Number ◽  
Type Inequality ◽  
Chern Number ◽  
Kähler Manifolds ◽  
Kahler Manifolds ◽  
Bisectional Curvature ◽  
Chern Numbers ◽  
Nef Vector Bundles

Abstract This article is concerned with Chern class and Chern number inequalities on polarized manifolds and nef vector bundles. For a polarized pair $(M,L)$ with $L$ very ample, our 1st main result is a family of sharp Chern class inequalities. Among them the 1st one is a variant of a classical result and the equality case of the 2nd one is a characterization of hypersurfaces. The 2nd main result is a Chern number inequality on it, which includes a reverse Miyaoka–Yau-type inequality. The 3rd main result is that the Chern numbers of a nef vector bundle over a compact Kähler manifold are bounded below by the Euler number. As an application, we classify compact Kähler manifolds with nonnegative bisectional curvature whose Chern numbers are all positive. A conjecture related to the Euler number of compact Kähler manifolds with nonpositive bisectional curvature is proposed, which can be regarded as a complex analogue to the Hopf conjecture.

scholarly journals MILES FORMULAE FOR BOOLEAN MODELS OBSERVED ON LATTICES

2011 ◽  
Vol 28 (2) ◽  
pp. 77 ◽  
Author(s):  
Joachim Ohser ◽  
Werner Nagel ◽  
Katja Schladitz
Keyword(s):  
Mean Curvature ◽  
Surface Density ◽  
Euler Number ◽  
Volume Density ◽  
Random Sets ◽  
Boolean Models ◽  
Intrinsic Volumes ◽  
Binary Images ◽  
Density Surface ◽  
The Mean

The densities of the intrinsic volumes – in 3D the volume density, surface density, the density of the integral of the mean curvature and the density of the Euler number – are a very useful collection of geometric characteristics of random sets. Combining integral and digital geometry we develop a method for efficient and simultaneous calculation of the intrinsic volumes of random sets observed in binary images in arbitrary dimensions. We consider isotropic and reflection invariant Boolean models sampled on homogeneous lattices and compute the expectations of the estimators of the intrinsic volumes. It turns out that the estimator for the surface density is proved to be asymptotically unbiased and thusmultigrid convergent for Boolean models with convex grains. The asymptotic bias of the estimators for the densities of the integral of the mean curvature and of the Euler number is assessed for Boolean models of balls of random diameters. Miles formulae with corresponding correction terms are derived for the 3D case.

Drag Coefficient and Two-Phase Friction Multiplier on Tube Bundles Subjected to Two-Phase Cross-Flow

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
W. G. Sim ◽  
Njuki W. Mureithi
Keyword(s):  
Drag Coefficient ◽  
Void Fraction ◽  
Euler Number ◽  
Tube Bundle ◽  
Cross Flow ◽  
Water Mixture ◽  
Duct Flow ◽  
Two Phase ◽  
Mass Fluxes ◽  
Wide Range

An approximate analytical model, to predict the drag coefficient on a cylinder and the two-phase Euler number for upward two-phase cross-flow through horizontal bundles, has been developed. To verify the model, two sets of experiments were performed with an air–water mixture for a range of pitch mass fluxes and void fractions. The experiments were undertaken using a rotated triangular (RT) array of cylinders having a pitch-to-diameter ratio of 1.5 and cylinder diameter 38 mm. The void fraction model proposed by Feenstra et al. was used to estimate the void fraction of the flow within the tube bundle. An important variable for drag coefficient estimation is the two-phase friction multiplier. A new drag coefficient model has been developed, based on the single-phase flow Euler number formulation proposed by Zukauskas et al. and the two-phase friction multiplier in duct flow formulated by various researchers. The present model is developed considering the Euler number formulation by Zukauskas et al. as well as existing two-phase friction multiplier models. It is found that Marchaterre's model for two-phase friction multiplier is applicable to air–water mixtures. The analytical results agree reasonably well with experimental drag coefficients and Euler numbers in air–water mixtures for a sufficiently wide range of pitch mass fluxes and qualities. This model will allow researchers to provide analytical estimates of the drag coefficient, which is related to two-phase damping.

Casson-Lin's Invariant and Floer Homology

1997 ◽  
Vol 06 (06) ◽  
pp. 851-877 ◽  
Author(s):  
Weiping Li
Keyword(s):  
Euler Number ◽  
Floer Homology ◽  
Natural Generalization ◽  
Conjugacy Classes ◽  
Irreducible Representations ◽  
Representation Space ◽  
Integral Homology

Casson defined an invariant which can be thought of as the number of conjugacy classes of irreducible representations of π1(Y) into SU(2) counted with signs, where Y is an oriented integral homology 3-sphere. Lin defined a similar invariant (the signature of a knot) for a braid representative of a knot in S3. In this paper, we give a natural generalization of Casson-Lin's invariant. Our invariant is the symplectic Floer homology for the representation space of π1(S3 \ K) into SU(2) with trace-zero along all meridians. The symplectic Floer homology of braids is a new invariant of knots and its Euler number is the negative of Casson-Lin's invariant.

Sign in / Sign up

Export Citation Format

Share Document