Macrokinetic Modeling of Chemical Oxygen Demand Removal in Pilot-Scale High-Rate Anaerobic Ponds

2010 ◽  
Vol 27 (4) ◽  
pp. 293-299 ◽  
Author(s):  
Miguel R. Peña
Keyword(s):  
Chemical Oxygen Demand ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
High Rate ◽  
Chemical Oxygen Demand Removal ◽  
Macrokinetic Modeling

Tilapia rearing with high rate algal pond effluent: ammonia surface loading rates and stocking densities effects

2018 ◽  
Vol 78 (1) ◽  
pp. 49-56
Author(s):  
I. A. Sánchez ◽  
R. K. X. Bastos ◽  
E. A. T. Lana
Keyword(s):  
Weight Gain ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Ammonia Nitrogen ◽  
High Rate ◽  
Surface Loading ◽  
Loading Rates ◽  
Total Weight Gain ◽  
Low Weight ◽  
Total Ammonia

Abstract In two pilot-scale experiments, fingerlings and juvenile of tilapia were reared in high rate algal pond (HRAP) effluent. The combination of three different total ammonia nitrogen (TAN) surface loading rates (SLR1 = 0.6, SLR2 = 1.2; SLR3 = 2.4 kg TAN·ha−1·d−1) and two fish stocking densities (D1 = 4 and D2 = 8 fish per tank) was evaluated during two 12-week experiments. Fingerlings total weight gain varied from 4.9 to 18.9 g, with the highest value (equivalent to 0.225 g·d−1) being recorded in SLR2-D1 treatment; however, high mortality (up to 67%) was recorded, probably due to sensitivity to ammonia and wide daily temperature variations. At lower water temperatures, juvenile tilapia showed no mortality, but very low weight gain. The fish rearing tanks worked as wastewater polishing units, adding the following approximate average removal figures on top of those achieved at the HRAP: 63% of total Kjeldahl nitrogen; 54% of ammonia nitrogen; 42% of total phosphorus; 37% of chemical oxygen demand; 1.1 log units of Escherichia coli.

Chemical Oxygen Demand Removal from Wastewater by Integrated Bioreactor

2015 ◽  
Vol 8 (5) ◽  
pp. 238-243 ◽  
Author(s):  
Ezerie Henry Ezec ◽  
Shamsul Rahman Bin Mohamed Ku ◽  
Mohamed Hasnain Is ◽  
Amirhossein Malakahmad ◽  
Salihi Umar Ibrahim
Keyword(s):  
Chemical Oxygen Demand ◽  
Oxygen Demand ◽  
Chemical Oxygen Demand Removal ◽  
Integrated Bioreactor

scholarly journals Innovative Effluent Capture and Evacuation Device that Increases COD Removal Efficiency in Subsurface Flow Wetlands

Processes ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 418 ◽  
Author(s):  
Pedro Cisterna-Osorio ◽  
Verónica Lazcano-Castro ◽  
Gisela Silva-Vasquez ◽  
Mauricio Llanos-Baeza ◽  
Ignacio Fuentes-Ortega
Keyword(s):  
Chemical Oxygen Demand ◽  
Removal Efficiency ◽  
Subsurface Flow ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Cod Removal ◽  
Discharge Device ◽  
The Impact ◽  
Real Scale ◽  
Conventional Device

The objective of this work is to evaluate the impact of innovative modifications made to conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications that have been developed extend the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to the conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand (COD) was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

Optimization of a mainstream nitritation-denitritation process and anammox polishing

2015 ◽  
Vol 72 (4) ◽  
pp. 632-642 ◽  
Author(s):  
Pusker Regmi ◽  
Becky Holgate ◽  
Dana Fredericks ◽  
Mark W. Miller ◽  
Bernhard Wett ◽  
...  
Keyword(s):  
Retention Time ◽  
Pilot Plant ◽  
Municipal Wastewater ◽  
Ammonia Oxidation ◽  
Inorganic Nitrogen ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
High Rate ◽  
Anammox Bacteria ◽  
Tin Removal

This paper deals with an almost 1-year long pilot study of a nitritation-denitritation process that was followed by anammox polishing. The pilot plant treated real municipal wastewater at ambient temperatures. The effluent of high-rate activated sludge process (hydraulic retention time, HRT = 30 min, solids retention time = 0.25 d) was fed to the pilot plant described in this paper, where a constant temperature of 23 °C was maintained. The nitritation-denitritation process was operated to promote nitrite oxidizing bacteria out-selection in an intermittently aerated reactor. The intermittent aeration pattern was controlled using a strategy based on effluent ammonia and nitrate + nitrite concentrations. The unique feature of this aeration control was that fixed dissolved oxygen set-point was used and the length of aerobic and anoxic durations were changed based on the effluent ammonia and nitrate + nitrite concentrations. The anaerobic ammonia oxidation (anammox) bacteria were adapted in mainstream conditions by allowing the growth on the moving bed bioreactor plastic media in a fully anoxic reactor. The total inorganic nitrogen (TIN) removal performance of the entire system was 75 ± 15% during the study at a modest influent chemical oxygen demand (COD)/NH4+-N ratio of 8.9 ± 1.8 within the HRT range of 3.1–9.4 h. Anammox polishing contributed 11% of overall TIN removal. Therefore, this pilot-scale study demonstrates that application of the proposed nitritation-denitritation system followed by anammox polishing is capable of relatively high nitrogen removal without supplemental carbon and alkalinity at a low HRT.

Sign in / Sign up

Export Citation Format

Share Document