scholarly journals In vitro crystallization of ribosomes from chick embryos.

1982 ◽  
Vol 95 (2) ◽  
pp. 648-653 ◽  
Author(s):  
R A Milligan ◽  
P N Unwin
Keyword(s):  
Chick Embryo ◽  
Ribosomal Subunit ◽  
Chick Embryos ◽  
Two Dimensional ◽  
Large Ribosomal Subunit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Full Complement ◽  
Polymorphic Forms

A new two-dimensional ribosome crystal, having the tetragonal space group P42(1)2 (a = 593 A), has been grown from ribosome tetramers extracted from hypothermic chick embryos. It is of particular interest because of its larger size (up to 3 x 3 micron2) and greater stability compared to other related polymorphic forms, and because it can easily be grown in large amounts. X-ray diffraction shows the order in the crystal to extend to a resolution of at least 60 A. The crystalline ribosomes appear to contain a full complement of small and large ribosomal subunit proteins and an additional four proteins not characteristic of chick embryo polysomes.

scholarly journals STUDIES ON THE CORNEA. II. THE FINE STRUCTURE OF DESCEMET'S MEMBRANE

1956 ◽  
Vol 2 (4) ◽  
pp. 243-252 ◽  
Author(s):  
Marie A. Jakus
Keyword(s):  
Fine Structure ◽  
Chick Embryo ◽  
Average Distance ◽  
Membrane Surface ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dimensional Array ◽  
Descemet's Membrane ◽  
Descemet’S Membrane

Descemet's membrane, previously thought to be "structureless," has been found to be characterized by a fine structure of great regularity. Sections perpendicular to the plane of the membrane surface appeared to be cross-striated, with narrow dark bands separated by wide light bands traversed by fine filaments. Tangential sections showed a two-dimensional array of dark nodes and thin internodal filaments which connected each node with the six others around it to form a hexagonal figure. The average distance between nodes, and between the dark bands in transverse sections, was about 1070 A; the width of the nodes was about 270 A; and the width of the connecting filaments was less than 100 A. This pattern has been found in all species of Descemet's membrane so far examined, although it appeared to be better developed in some forms than in others. So far as is known, it has not been observed in any other type of tissue. The differentiation of Descemet's membrane has been followed in the chick embryo. It appeared late and developed slowly but showed the characteristic fine structure from the time it could be clearly identified. The evidence for placing Descemet's membrane in the collagen class of proteins is strongly supplemented by the results obtained from x-ray diffraction examination by Rougvie and Bear.

scholarly journals EXPLORING STRUCTURAL ASPECTS OF NATEGLINIDE POLYMORPHS USING POWDER X-RAY DIFFRACTION

2017 ◽  
Vol 9 (10) ◽  
pp. 119 ◽  
Author(s):  
Parnika Goyal ◽  
Dimpy Rani ◽  
Renu Chadha
Keyword(s):  
Energy Landscape ◽  
Research Work ◽  
Lattice Energy ◽  
X Ray Diffraction ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Stability Ranking ◽  
Polymorphic Forms ◽  
Structural Aspects

Objective: The present manuscript highlights the structural aspects of some polymorphic forms of nateglinide using powder x-ray diffraction (PXRD) pattern.Methods: All the polymorphic forms were isolated as microcrystalline powder, therefore, powder diffraction patterns was used as a tool to determine the crystal structure. For this, Reflux Plus module of BIOVIA Material Studio software was used. Polymorph prediction (PP) and crystal morphology analysis were performed to estimate the global minimum in lattice energy landscape and morphologically important (M. I.) facets, respectively. Besides this, to investigate the behavior of polymorphs in solution phase, in vitro studies (enthalpy of solution, solubility, intrinsic dissolution rate) were also performed.Results: A new form MS was prepared and characterized. The Form H, B, MS and S were found to exist in space group P-1, C2, P-4 and P-42C, respectively. These crystal structures were found to lie on local minima in crystal energy landscape. The stability ranking of nateglinide polymorphs follows the order: Form MS<Form B<Form H<Form S.Conclusion: This research work demonstrates that PXRD is a valuable alternative for determining the structure of microcrystalline powders.

Tubulin structure at intermediate resolution

1995 ◽  
Vol 53 ◽  
pp. 852-853
Author(s):  
K. H. Downing ◽  
S. G. Wolf ◽  
E. Nogales
Keyword(s):  
High Resolution ◽  
Structural Data ◽  
Therapeutic Drug ◽  
Zinc Ions ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Negative Stain ◽  
Functional Mechanisms ◽  
Tubulin Structure

Microtubules are involved in a host of critical cell activities, many of which involve transport of organelles through the cell. Different sets of microtubules appear to form during the cell cycle for different functions. Knowledge of the structure of tubulin will be necessary in order to understand the various functional mechanisms of microtubule assemble, disassembly, and interaction with other molecules, but tubulin has so far resisted crystallization for x-ray diffraction studies. Fortuitously, in the presence of zinc ions, tubulin also forms two-dimensional, crystalline sheets that are ideally suited for study by electron microscopy. We have refined procedures for forming the sheets and preparing them for EM, and have been able to obtain high-resolution structural data that sheds light on the formation and stabilization of microtubules, and even the interaction with a therapeutic drug.Tubulin sheets had been extensively studied in negative stain, demonstrating that the same protofilament structure was formed in the sheets and microtubules. For high resolution studies, we have found that the sheets embedded in either glucose or tannin diffract to around 3 Å.

Synthesis and Structure of a Clathrated Two-Dimensional Metal-Organic Framework: [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2·H2O (L = Bis(1-pyrazinylethylidene)hydrazine)

2008 ◽  
Vol 73 (1) ◽  
pp. 24-31
Author(s):  
Dayu Wu ◽  
Genhua Wu ◽  
Wei Huang ◽  
Zhuqing Wang
Keyword(s):  
Metal Organic Framework ◽  
Channel Structure ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
X Ray ◽  
Square Planar ◽  
Metal Organic ◽  
Aqueous Meoh ◽  
Organic Framework

The compound [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2 was obtained by the reaction of Cd(ClO4)2, bis(1-pyrazinylethylidene)hydrazine (L) and 4,4'-bipyridine in aqueous MeOH. Single-crystal X-ray diffraction has revealed its two-dimensional metal-organic framework. The 2-D layers superpose on each other, giving a channel structure. The square planar grids consist of two pairs of shared edges with Cd(II) ion and a 4,4'-bipyridine molecule each vertex and side, respectively. The square cavity has a dimension of 11.817 × 11.781 Å. Two guest molecules of bis(1-pyrazinylethylidene)hydrazine are clathrated in every hydrophobic host cavity, being further stabilized by π-π stacking and hydrogen bonding. The results suggest that the hydrazine molecules present in the network serve as structure-directing templates in the formation of crystal structures.

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

Fabrication and evaluation of calcium phosphate cement scaffold with controlled internal channel architecture and complex shape

2007 ◽  
Vol 221 (8) ◽  
pp. 951-958 ◽  
Author(s):  
X Li ◽  
D Li ◽  
B Lu ◽  
L Wang ◽  
Z Wang
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Calcium Phosphate Cement ◽  
Complex Shape ◽  
X Ray Diffraction ◽  
X Ray ◽  
Precise Control ◽  
Internal Channel ◽  
Channel Architecture

The ability to have precise control over internal channel architecture, porosity, and external shape is essential for tissue engineering. The feasibility of using indirect stereo-lithography (SL) to produce scaffolds from calcium phosphate cement materials for bone tissue engineering has been investigated. The internal channel architecture of the scaffolds was created by removal of the negative resin moulds made with SL. Scanning electron microscopy (SEM) showed highly open, well-interconnected channel architecture. The X-ray diffraction examination revealed that the hydroxyapatite phase formed at room temperature in the cement was basically stable up to 850 °C. There was no phase decomposition of hydroxyapatite, although the crystallinity and grain size were different. The ability of resulting structure to support osteoblastic cells culture was tested in vitro. Cells were evenly distributed on exterior surfaces and grew into the internal channels of scaffolds. To exploit the ability of this technique, anatomically shaped femoral supracondylar scaffolds with 300-800 μm interconnected channels were produced and characterized.

A Novel Missense Mutation (p.P52R) in Amelogenin Gene Causing X-linked Amelogenesis Imperfecta

2007 ◽  
Vol 86 (1) ◽  
pp. 69-72 ◽  
Author(s):  
M. Kida ◽  
Y. Sakiyama ◽  
A. Matsuda ◽  
S. Takabayashi ◽  
H. Ochi ◽  
...  
Keyword(s):  
Novel Mutation ◽  
Dental Enamel ◽  
Fluorescence Analysis ◽  
Hereditary Disease ◽  
Amelogenesis Imperfecta ◽  
X Ray Diffraction ◽  
Japanese Family ◽  
X Ray ◽  
Amelogenin Gene

Amelogenesis imperfecta (AI) is a hereditary disease with abnormal dental enamel formation. Here we report a Japanese family with X-linked AI transmitted over at least four generations. Mutation analysis revealed a novel mutation (p.P52R) in exon 5 of the amelogenin gene. The mutation was detected as heterozygous in affected females and as hemizygous in their affected father. The affected sisters exhibited vertical ridges on the enamel surfaces, whereas the affected father had thin, smooth, yellowish enamel with distinct widening of inter-dental spaces. To study the pathological cause underlying the disease in this family, we synthesized the mutant amelogenin p.P52R protein and evaluated it in vitro. Furthermore, we studied differences in the chemical composition between normal and affected teeth by x-ray diffraction analysis and x-ray fluorescence analysis. We believe that these results will greatly aid our understanding of the pathogenesis of X-linked AI.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Two-dimensional lanthanide(III) coordination polymers: solvothermal synthesis, crystal structure, and stability

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Runmei Ding ◽  
Zixin He ◽  
Meilin Wang ◽  
Danian Tian ◽  
Peipei Cen
Keyword(s):  
Crystal Structure ◽  
Coordination Polymers ◽  
Solvothermal Synthesis ◽  
Analysis Data ◽  
Water Stability ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Solvothermal Conditions

AbstractBased on 2-(4-pyridyl)-terephthalate (H2pta) and oxalate ligands, two new lanthanide-containing coordination polymers (CPs), [Tb(pta)(C2O4)0.5(H2O)2)]·2H2O (1) and [Sm(pta)(C2O4)0.5(H2O)2)]·2H2O (2), have been synthesized under solvothermal conditions. The structures of both 1 and 2 have been determined by single-crystal X-ray diffraction. Infrared, elemental analysis, powder X-ray diffraction and thermogravimetric analysis data are also presented. The crystals of 1 and 2 exhibit isostructural layer-like networks, crystallizing in the triclinic space group P$&#x203e;{1}$. The layers are further stabilized and associated into 3D architectures through hydrogen bonding. Remarkably, the CPs 1 and 2 exhibit excellent water stability and remarkable thermostability with thermal decomposition temperatures of more than 420 °C.

Sign in / Sign up

Export Citation Format

Share Document