scholarly journals Actin, alpha-actinin, and tropomyosin interaction in the structural organization of actin filaments in nonmuscle cells.

1976 ◽  
Vol 68 (2) ◽  
pp. 202-219 ◽  
Author(s):  
E Lazarides
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Specific Interaction ◽  
Three Dimensional ◽  
Culture Cells ◽  
Dimensional Network ◽  
Nonmuscle Cells ◽  
Embryo Cells ◽  
Filament Bundles ◽  
Regular Network

During the spreading of a population of rat embryo cells, approximately 40% of the cells develop a strikingly regular network which precedes the formation of the straight actin filament bundles seen in the fully spread out cells. Immunofluorescence studies with antibodies specific for the skeletal muscle structural proteins actin, alpha-actinin, and tropomyosin indicate that this network is composed of foci containing actin and alpha-actinin, connected by tropomyosin-associated actin filaments. Actin filaments, having both tropomyosin and alpha-actinin associated with them, are also seen to extend from the vertices of this network to the edges of the cell. These results demonstrate a specific interaction of alpha-actinin and tropomyosin with actin filaments during the assembly and organization of the actin filament bundles of tissue culture cells. The three-dimensional network they form may be regarded as the structural precursor and the vertices of this network as the organization centers of the ultimately formed actin filament bundles of the fully spread out cells.

Electron Microscopy of Cytoplasmic Contractile Proteins

1978 ◽  
Vol 36 (3) ◽  
pp. 606-614 ◽  
Author(s):  
T.D. Pollard ◽  
P. Maupin
Keyword(s):  
Electron Microscopy ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Uranyl Acetate ◽  
Contractile Proteins ◽  
Dimensional Structure ◽  
X Ray Diffraction ◽  
Cytoplasmic Matrix ◽  
Computer Image Processing ◽  
Nonmuscle Cells

In this paper we review some of the contributions that electron microscopy has made to the analysis of actin and myosin from nonmuscle cells. We place particular emphasis upon the limitations of the ultrastructural techniques used to study these cytoplasmic contractile proteins, because it is not widely recognized how difficult it is to preserve these elements of the cytoplasmic matrix for electron microscopy. The structure of actin filaments is well preserved for electron microscope observation by negative staining with uranyl acetate (Figure 1). In fact, to a resolution of about 3nm the three-dimensional structure of actin filaments determined by computer image processing of electron micrographs of negatively stained specimens (Moore et al., 1970) is indistinguishable from the structure revealed by X-ray diffraction of living muscle.

scholarly journals αE-catenin actin-binding domain alters actin filament conformation and regulates binding of nucleation and disassembly factors

2013 ◽  
Vol 24 (23) ◽  
pp. 3710-3720 ◽  
Author(s):  
Scott D. Hansen ◽  
Adam V. Kwiatkowski ◽  
Chung-Yueh Ouyang ◽  
HongJun Liu ◽  
Sabine Pokutta ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Binding Domain ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Structure ◽  
Actin Binding Domain ◽  
Filament Bundles ◽  
Underlying Mechanisms ◽  
Cell Cell

The actin-binding protein αE-catenin may contribute to transitions between cell migration and cell–cell adhesion that depend on remodeling the actin cytoskeleton, but the underlying mechanisms are unknown. We show that the αE-catenin actin-binding domain (ABD) binds cooperatively to individual actin filaments and that binding is accompanied by a conformational change in the actin protomer that affects filament structure. αE-catenin ABD binding limits barbed-end growth, especially in actin filament bundles. αE-catenin ABD inhibits actin filament branching by the Arp2/3 complex and severing by cofilin, both of which contact regions of the actin protomer that are structurally altered by αE-catenin ABD binding. In epithelial cells, there is little correlation between the distribution of αE-catenin and the Arp2/3 complex at developing cell–cell contacts. Our results indicate that αE-catenin binding to filamentous actin favors assembly of unbranched filament bundles that are protected from severing over more dynamic, branched filament arrays.

scholarly journals ER sheet persistence is coupled to myosin 1c–regulated dynamic actin filament arrays

2014 ◽  
Vol 25 (7) ◽  
pp. 1111-1126 ◽  
Author(s):  
Merja Joensuu ◽  
Ilya Belevich ◽  
Olli Rämö ◽  
Ilya Nevzorov ◽  
Helena Vihinen ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Network Architecture ◽  
Live Cell Imaging ◽  
Cell Imaging ◽  
Three Dimensional ◽  
Actin Depolymerization ◽  
Specific Subset ◽  
3D Network ◽  
3D Electron Microscopy

The endoplasmic reticulum (ER) comprises a dynamic three-dimensional (3D) network with diverse structural and functional domains. Proper ER operation requires an intricate balance within and between dynamics, morphology, and functions, but how these processes are coupled in cells has been unclear. Using live-cell imaging and 3D electron microscopy, we identify a specific subset of actin filaments localizing to polygons defined by ER sheets and tubules and describe a role for these actin arrays in ER sheet persistence and, thereby, in maintenance of the characteristic network architecture by showing that actin depolymerization leads to increased sheet fluctuation and transformations and results in small and less abundant sheet remnants and a defective ER network distribution. Furthermore, we identify myosin 1c localizing to the ER-associated actin filament arrays and reveal a novel role for myosin 1c in regulating these actin structures, as myosin 1c manipulations lead to loss of the actin filaments and to similar ER phenotype as observed after actin depolymerization. We propose that ER-associated actin filaments have a role in ER sheet persistence regulation and thus support the maintenance of sheets as a stationary subdomain of the dynamic ER network.

scholarly journals F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments.

1996 ◽  
Vol 135 (5) ◽  
pp. 1291-1308 ◽  
Author(s):  
L G Tilney ◽  
P Connelly ◽  
S Smith ◽  
G M Guild
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Modular Design ◽  
Thin Sections ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Phalloidin Staining ◽  
Filament Bundles ◽  
End To End ◽  
As If

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.

scholarly journals Actin-depolymerizing Factor and Cofilin-1 Play Overlapping Roles in Promoting Rapid F-Actin Depolymerization in Mammalian Nonmuscle Cells

2005 ◽  
Vol 16 (2) ◽  
pp. 649-664 ◽  
Author(s):  
Pirta Hotulainen ◽  
Eija Paunola ◽  
Maria K. Vartiainen ◽  
Pekka Lappalainen
Keyword(s):  
Cell Motility ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Dynamics ◽  
Actin Binding ◽  
Actin Depolymerizing Factor ◽  
Cytoskeletal Dynamics ◽  
Nonmuscle Cells ◽  
In Cells

Actin-depolymerizing factor (ADF)/cofilins are small actin-binding proteins found in all eukaryotes. In vitro, ADF/cofilins promote actin dynamics by depolymerizing and severing actin filaments. However, whether ADF/cofilins contribute to actin dynamics in cells by disassembling “old” actin filaments or by promoting actin filament assembly through their severing activity is a matter of controversy. Analysis of mammalian ADF/cofilins is further complicated by the presence of multiple isoforms, which may contribute to actin dynamics by different mechanisms. We show that two isoforms, ADF and cofilin-1, are expressed in mouse NIH 3T3, B16F1, and Neuro 2A cells. Depleting cofilin-1 and/or ADF by siRNA leads to an accumulation of F-actin and to an increase in cell size. Cofilin-1 and ADF seem to play overlapping roles in cells, because the knockdown phenotype of either protein could be rescued by overexpression of the other one. Cofilin-1 and ADF knockdown cells also had defects in cell motility and cytokinesis, and these defects were most pronounced when both ADF and cofilin-1 were depleted. Fluorescence recovery after photobleaching analysis and studies with an actin monomer-sequestering drug, latrunculin-A, demonstrated that these phenotypes arose from diminished actin filament depolymerization rates. These data suggest that mammalian ADF and cofilin-1 promote cytoskeletal dynamics by depolymerizing actin filaments and that this activity is critical for several processes such as cytokinesis and cell motility.

scholarly journals Identification of Novel Graded Polarity Actin Filament Bundles in Locomoting Heart Fibroblasts: Implications for the Generation of Motile Force

1997 ◽  
Vol 136 (6) ◽  
pp. 1287-1305 ◽  
Author(s):  
Louise P. Cramer ◽  
Margaret Siebert ◽  
Timothy J. Mitchison
Keyword(s):  
Cell Body ◽  
Actin Filament ◽  
Actin Filaments ◽  
Structural Organization ◽  
Actin Bundle ◽  
Inner Surface ◽  
Filament Bundles ◽  
First Time ◽  
Dynamic Populations ◽  
Uniform Polarity

We have determined the structural organization and dynamic behavior of actin filaments in entire primary locomoting heart fibroblasts by S1 decoration, serial section EM, and photoactivation of fluorescence. As expected, actin filaments in the lamellipodium of these cells have uniform polarity with barbed ends facing forward. In the lamella, cell body, and tail there are two observable types of actin filament organization. A less abundant type is located on the inner surface of the plasma membrane and is composed of short, overlapping actin bundles (0.25–2.5 μm) that repeatedly alternate in polarity from uniform barbed ends forward to uniform pointed ends forward. This type of organization is similar to the organization we show for actin filament bundles (stress fibers) in nonlocomoting cells (PtK2 cells) and to the known organization of muscle sarcomeres. The more abundant type of actin filament organization in locomoting heart fibroblasts is mostly ventrally located and is composed of long, overlapping bundles (average 13 μm, but can reach up to about 30 μm) which span the length of the cell. This more abundant type has a novel graded polarity organization. In each actin bundle, polarity gradually changes along the length of the bundle. Actual actin filament polarity at any given point in the bundle is determined by position in the cell; the closer to the front of the cell the more barbed ends of actin filaments face forward. By photoactivation marking in locomoting heart fibroblasts, as expected in the lamellipodium, actin filaments flow rearward with respect to substrate. In the lamella, all marked and observed actin filaments remain stationary with respect to substrate as the fibroblast locomotes. In the cell body of locomoting fibroblasts there are two dynamic populations of actin filaments: one remains stationary and the other moves forward with respect to substrate at the rate of the cell body. This is the first time that the structural organization and dynamics of actin filaments have been determined in an entire locomoting cell. The organization, dynamics, and relative abundance of graded polarity actin filament bundles have important implications for the generation of motile force during primary heart fibroblast locomotion.

scholarly journals Isoforms of α-Actinin from Cardiac, Smooth, and Skeletal Muscle Form Polar Arrays of Actin Filaments

2000 ◽  
Vol 149 (3) ◽  
pp. 635-646 ◽  
Author(s):  
Kenneth A. Taylor ◽  
Dianne W. Taylor ◽  
Fred Schachat
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Polar Filament ◽  
Relative Orientation ◽  
Lipid Monolayer ◽  
Cross Linking ◽  
Internal Diameter ◽  
Vertebrate Muscle ◽  
Filament Bundles ◽  
Positively Charged

We have used a positively charged lipid monolayer to form two-dimensional bundles of F-actin cross-linked by α-actinin to investigate the relative orientation of the actin filaments within them. This method prevents growth of the bundles perpendicular to the monolayer plane, thereby facilitating interpretation of the electron micrographs. Using α-actinin isoforms isolated from the three types of vertebrate muscle, i.e., cardiac, skeletal, and smooth, we have observed almost exclusively cross-linking between polar arrays of filaments, i.e., actin filaments with their plus ends oriented in the same direction. One type of bundle can be classified as an Archimedian spiral consisting of a single actin filament that spirals inward as the filament grows and the bundle is formed. These spirals have a consistent hand and grow to a limiting internal diameter of 0.4–0.7 μm, where the filaments appear to break and spiral formation ceases. These results, using isoforms usually characterized as cross-linkers of bipolar actin filament bundles, suggest that α-actinin is capable of cross-linking actin filaments in any orientation. Formation of specifically bipolar or polar filament arrays cross-linked by α-actinin may require additional factors that either determine the filament orientation or restrict the cross-linking capabilities of α-actinin.

scholarly journals Nerve growth cone lamellipodia contain two populations of actin filaments that differ in organization and polarity.

1992 ◽  
Vol 119 (5) ◽  
pp. 1219-1243 ◽  
Author(s):  
A K Lewis ◽  
P C Bridgman
Keyword(s):  
Actin Filament ◽  
Growth Cone ◽  
Actin Filaments ◽  
Membrane Surface ◽  
Leading Edge ◽  
Growth Cones ◽  
Differential Interference Contrast Microscopy ◽  
Nerve Growth ◽  
Filament Bundles ◽  
Two Populations

The organization and polarity of actin filaments in neuronal growth cones was studied with negative stain and freeze-etch EM using a permeabilization protocol that caused little detectable change in morphology when cultured nerve growth cones were observed by video-enhanced differential interference contrast microscopy. The lamellipodial actin cytoskeleton was composed of two distinct subpopulations: a population of 40-100-nm-wide filament bundles radiated from the leading edge, and a second population of branching short filaments filled the volume between the dorsal and ventral membrane surfaces. Together, the two populations formed the three-dimensional structural network seen within expanding lamellipodia. Interaction of the actin filaments with the ventral membrane surface occurred along the length of the filaments via membrane associated proteins. The long bundled filament population was primarily involved in these interactions. The filament tips of either population appeared to interact with the membrane only at the leading edge; this interaction was mediated by a globular Triton-insoluble material. Actin filament polarity was determined by decoration with myosin S1 or heavy meromyosin. Previous reports have suggested that the polarity of the actin filaments in motile cells is uniform, with the barbed ends toward the leading edge. We observed that the actin filament polarity within growth cone lamellipodia is not uniform; although the predominant orientation was with the barbed end toward the leading edge (47-56%), 22-25% of the filaments had the opposite orientation with their pointed ends toward the leading edge, and 19-31% ran parallel to the leading edge. The two actin filament populations display distinct polarity profiles: the longer filaments appear to be oriented predominantly with their barbed ends toward the leading edge, whereas the short filaments appear to be randomly oriented. The different length, organization and polarity of the two filament populations suggest that they differ in stability and function. The population of bundled long filaments, which appeared to be more ventrally located and in contact with membrane proteins, may be more stable than the population of short branched filaments. The location, organization, and polarity of the long bundled filaments suggest that they may be necessary for the expansion of lamellipodia and for the production of tension mediated by receptors to substrate adhesion molecules.

scholarly journals Isolation and characterization of two forms of a cytoskeleton.

1979 ◽  
Vol 83 (1) ◽  
pp. 109-115 ◽  
Author(s):  
K T Edds
Keyword(s):  
Sea Urchin ◽  
Electron Micrographs ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Strongylocentrotus Droebachiensis ◽  
Major Protein ◽  
Molecular Weights ◽  
Isolation And Characterization ◽  
Filament Bundles

Isolated petaloid coelomocytes from the sea urchin Strongylocentrotus droebachiensis transform to a filopodial morphology in hypotonic media. Electron micrographs of negatively stained Triton-insoluble cytoskeletons show that the petaloid form consists of a loose net of microfilaments while the filopodial form consists of paracrystalline bundles of microfilaments. Actin is the major protein of both forms of the cytoskeleton. Additional polypeptides have molecular weights of approximately 220,000, 64,000, 57,000, and 27,000 daltons. Relative to actin the filopodial cytoskeletons have an average of 2.5 times as much 57k polypeptide as the petaloid cytoskeletons. Treatment with 0.25 M NaCl dissociates the filament bundles into individual actin filaments free of the actin-associated polypeptides. Thus, one or more of these actin-associated polypeptides may be responsible for crosslinking the actin filaments into bundles and maintaining the three-dimensional nature of the cytoskeletons.

Sorting of actin isoforms in chicken auditory hair cells

1997 ◽  
Vol 110 (6) ◽  
pp. 765-770 ◽  
Author(s):  
D. Hofer ◽  
W. Ness ◽  
D. Drenckhahn
Keyword(s):  
Actin Filament ◽  
Hair Cells ◽  
Auditory Hair Cells ◽  
Actin Isoforms ◽  
Cytoplasmic Actin ◽  
Beta Actin ◽  
Nonmuscle Cells ◽  
Filament Bundles ◽  
Actin Isoform ◽  
Cellular Compartments

Most nonmuscle cells of higher vertebrates contain two different actin isoforms, beta- and gamma-cytoplasmic actin. The beta-isoform is with few exceptions the predominant isoform in nonmuscle cells and tissues. Perturbation of the beta:gamma ratio has been shown to affect the organization of bundled actin filaments indicating that the beta- and gamma-genes encode functionally distinct cytoarchitectural information. In the present study we localized by immunostaining beta- and gamma-actin in chicken auditory hair cells. These highly specialized cells serve as model system for studying certain developmental and structural aspects of a complex actin filament system with high architectural precision. We show that gamma-actin is the predominant actin isoform in auditory hair cells with an apparent beta:gamma ratio of approximately 1:2. gamma-Actin is not sorted and occurs in all three actin assemblies of the hair border, i.e. the cores of sensory hairs (stereocilia), the subjacent gel-like actin filament meshwork (cuticular plate) and the zonula adherens ring. In contrast to gamma-actin, the beta-isoform is specifically sorted to the actin filament core bundle of stereocilia that is extensively crosslinked by fimbrin. In view of recent studies showing that L-plastin, the leukocyte homolog of fimbrin, has a higher binding affinity for beta-actin than for gamma-actin, a mechanism is proposed for how hair cells might restrict formation of actin filament bundles to a single cellular site (i.e. the stereocilia). The limited level of expression of beta-actin in hair cells may help to prevent ectopic bundle formation in other cellular compartments.

Sign in / Sign up

Export Citation Format

Share Document