scholarly journals Isoforms of α-Actinin from Cardiac, Smooth, and Skeletal Muscle Form Polar Arrays of Actin Filaments

2000 ◽  
Vol 149 (3) ◽  
pp. 635-646 ◽  
Author(s):  
Kenneth A. Taylor ◽  
Dianne W. Taylor ◽  
Fred Schachat
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Polar Filament ◽  
Relative Orientation ◽  
Lipid Monolayer ◽  
Cross Linking ◽  
Internal Diameter ◽  
Vertebrate Muscle ◽  
Filament Bundles ◽  
Positively Charged

We have used a positively charged lipid monolayer to form two-dimensional bundles of F-actin cross-linked by α-actinin to investigate the relative orientation of the actin filaments within them. This method prevents growth of the bundles perpendicular to the monolayer plane, thereby facilitating interpretation of the electron micrographs. Using α-actinin isoforms isolated from the three types of vertebrate muscle, i.e., cardiac, skeletal, and smooth, we have observed almost exclusively cross-linking between polar arrays of filaments, i.e., actin filaments with their plus ends oriented in the same direction. One type of bundle can be classified as an Archimedian spiral consisting of a single actin filament that spirals inward as the filament grows and the bundle is formed. These spirals have a consistent hand and grow to a limiting internal diameter of 0.4–0.7 μm, where the filaments appear to break and spiral formation ceases. These results, using isoforms usually characterized as cross-linkers of bipolar actin filament bundles, suggest that α-actinin is capable of cross-linking actin filaments in any orientation. Formation of specifically bipolar or polar filament arrays cross-linked by α-actinin may require additional factors that either determine the filament orientation or restrict the cross-linking capabilities of α-actinin.

scholarly journals αE-catenin actin-binding domain alters actin filament conformation and regulates binding of nucleation and disassembly factors

2013 ◽  
Vol 24 (23) ◽  
pp. 3710-3720 ◽  
Author(s):  
Scott D. Hansen ◽  
Adam V. Kwiatkowski ◽  
Chung-Yueh Ouyang ◽  
HongJun Liu ◽  
Sabine Pokutta ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Binding Domain ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Structure ◽  
Actin Binding Domain ◽  
Filament Bundles ◽  
Underlying Mechanisms ◽  
Cell Cell

The actin-binding protein αE-catenin may contribute to transitions between cell migration and cell–cell adhesion that depend on remodeling the actin cytoskeleton, but the underlying mechanisms are unknown. We show that the αE-catenin actin-binding domain (ABD) binds cooperatively to individual actin filaments and that binding is accompanied by a conformational change in the actin protomer that affects filament structure. αE-catenin ABD binding limits barbed-end growth, especially in actin filament bundles. αE-catenin ABD inhibits actin filament branching by the Arp2/3 complex and severing by cofilin, both of which contact regions of the actin protomer that are structurally altered by αE-catenin ABD binding. In epithelial cells, there is little correlation between the distribution of αE-catenin and the Arp2/3 complex at developing cell–cell contacts. Our results indicate that αE-catenin binding to filamentous actin favors assembly of unbranched filament bundles that are protected from severing over more dynamic, branched filament arrays.

scholarly journals The F-actin bundler α-actinin Ain1 is tailored for ring assembly and constriction during cytokinesis in fission yeast

2016 ◽  
Vol 27 (11) ◽  
pp. 1821-1833 ◽  
Author(s):  
Yujie Li ◽  
Jenna R. Christensen ◽  
Kaitlin E. Homa ◽  
Glen M. Hocky ◽  
Alice Fok ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Biochemical Properties ◽  
Ring Formation ◽  
Cross Linking ◽  
Contractile Ring ◽  
Mixed Polarity ◽  
Dividing Cells

The actomyosin contractile ring is a network of cross-linked actin filaments that facilitates cytokinesis in dividing cells. Contractile ring formation has been well characterized in Schizosaccharomyces pombe, in which the cross-linking protein α-actinin SpAin1 bundles the actin filament network. However, the specific biochemical properties of SpAin1 and whether they are tailored for cytokinesis are not known. Therefore we purified SpAin1 and quantified its ability to dynamically bind and bundle actin filaments in vitro using a combination of bulk sedimentation assays and direct visualization by two-color total internal reflection fluorescence microscopy. We found that, while SpAin1 bundles actin filaments of mixed polarity like other α-actinins, SpAin1 has lower bundling activity and is more dynamic than human α-actinin HsACTN4. To determine whether dynamic bundling is important for cytokinesis in fission yeast, we created the less dynamic bundling mutant SpAin1(R216E). We found that dynamic bundling is critical for cytokinesis, as cells expressing SpAin1(R216E) display disorganized ring material and delays in both ring formation and constriction. Furthermore, computer simulations of initial actin filament elongation and alignment revealed that an intermediate level of cross-linking best facilitates filament alignment. Together our results demonstrate that dynamic bundling by SpAin1 is important for proper contractile ring formation and constriction.

scholarly journals Bundling of actin filaments by alpha-actinin depends on its molecular length.

1990 ◽  
Vol 110 (6) ◽  
pp. 2013-2024 ◽  
Author(s):  
R K Meyer ◽  
U Aebi
Keyword(s):  
Smooth Muscle ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Binding ◽  
Molar Ratio ◽  
Cross Linking ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Chicken Gizzard ◽  
Molecular Length

Cross-linking of actin filaments (F-actin) into bundles and networks was investigated with three different isoforms of the dumbbell-shaped alpha-actinin homodimer under identical reaction conditions. These were isolated from chicken gizzard smooth muscle, Acanthamoeba, and Dictyostelium, respectively. Examination in the electron microscope revealed that each isoform was able to cross-link F-actin into networks. In addition, F-actin bundles were obtained with chicken gizzard and Acanthamoeba alpha-actinin, but not Dictyostelium alpha-actinin under conditions where actin by itself polymerized into disperse filaments. This F-actin bundle formation critically depended on the proper molar ratio of alpha-actinin to actin, and hence F-actin bundles immediately disappeared when free alpha-actinin was withdrawn from the surrounding medium. The apparent dissociation constants (Kds) at half-saturation of the actin binding sites were 0.4 microM at 22 degrees C and 1.2 microM at 37 degrees C for chicken gizzard, and 2.7 microM at 22 degrees C for both Acanthamoeba and Dictyostelium alpha-actinin. Chicken gizzard and Dictyostelium alpha-actinin predominantly cross-linked actin filaments in an antiparallel fashion, whereas Acanthamoeba alpha-actinin cross-linked actin filaments preferentially in a parallel fashion. The average molecular length of free alpha-actinin was 37 nm for glycerol-sprayed/rotary metal-shadowed and 35 nm for negatively stained chicken gizzard; 46 and 44 nm, respectively, for Acanthamoeba; and 34 and 31 nm, respectively, for Dictyostelium alpha-actinin. In negatively stained preparations we also evaluated the average molecular length of alpha-actinin when bound to actin filaments: 36 nm for chicken gizzard and 35 nm for Acanthamoeba alpha-actinin, a molecular length roughly coinciding with the crossover repeat of the two-stranded F-actin helix (i.e., 36 nm), but only 28 nm for Dictyostelium alpha-actinin. Furthermore, the minimal spacing between cross-linking alpha-actinin molecules along actin filaments was close to 36 nm for both smooth muscle and Acanthamoeba alpha-actinin, but only 31 nm for Dictyostelium alpha-actinin. This observation suggests that the molecular length of the alpha-actinin homodimer may determine its spacing along the actin filament, and hence F-actin bundle formation may require "tight" (i.e., one molecule after the other) and "untwisted" (i.e., the long axis of the molecule being parallel to the actin filament axis) packing of alpha-actinin molecules along the actin filaments.

scholarly journals F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments.

1996 ◽  
Vol 135 (5) ◽  
pp. 1291-1308 ◽  
Author(s):  
L G Tilney ◽  
P Connelly ◽  
S Smith ◽  
G M Guild
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Modular Design ◽  
Thin Sections ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Phalloidin Staining ◽  
Filament Bundles ◽  
End To End ◽  
As If

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.

scholarly journals Identification of Novel Graded Polarity Actin Filament Bundles in Locomoting Heart Fibroblasts: Implications for the Generation of Motile Force

1997 ◽  
Vol 136 (6) ◽  
pp. 1287-1305 ◽  
Author(s):  
Louise P. Cramer ◽  
Margaret Siebert ◽  
Timothy J. Mitchison
Keyword(s):  
Cell Body ◽  
Actin Filament ◽  
Actin Filaments ◽  
Structural Organization ◽  
Actin Bundle ◽  
Inner Surface ◽  
Filament Bundles ◽  
First Time ◽  
Dynamic Populations ◽  
Uniform Polarity

We have determined the structural organization and dynamic behavior of actin filaments in entire primary locomoting heart fibroblasts by S1 decoration, serial section EM, and photoactivation of fluorescence. As expected, actin filaments in the lamellipodium of these cells have uniform polarity with barbed ends facing forward. In the lamella, cell body, and tail there are two observable types of actin filament organization. A less abundant type is located on the inner surface of the plasma membrane and is composed of short, overlapping actin bundles (0.25–2.5 μm) that repeatedly alternate in polarity from uniform barbed ends forward to uniform pointed ends forward. This type of organization is similar to the organization we show for actin filament bundles (stress fibers) in nonlocomoting cells (PtK2 cells) and to the known organization of muscle sarcomeres. The more abundant type of actin filament organization in locomoting heart fibroblasts is mostly ventrally located and is composed of long, overlapping bundles (average 13 μm, but can reach up to about 30 μm) which span the length of the cell. This more abundant type has a novel graded polarity organization. In each actin bundle, polarity gradually changes along the length of the bundle. Actual actin filament polarity at any given point in the bundle is determined by position in the cell; the closer to the front of the cell the more barbed ends of actin filaments face forward. By photoactivation marking in locomoting heart fibroblasts, as expected in the lamellipodium, actin filaments flow rearward with respect to substrate. In the lamella, all marked and observed actin filaments remain stationary with respect to substrate as the fibroblast locomotes. In the cell body of locomoting fibroblasts there are two dynamic populations of actin filaments: one remains stationary and the other moves forward with respect to substrate at the rate of the cell body. This is the first time that the structural organization and dynamics of actin filaments have been determined in an entire locomoting cell. The organization, dynamics, and relative abundance of graded polarity actin filament bundles have important implications for the generation of motile force during primary heart fibroblast locomotion.

scholarly journals Actin filament destruction by osmium tetroxide

1978 ◽  
Vol 77 (3) ◽  
pp. 837-852 ◽  
Author(s):  
P Maupin-Szamier ◽  
TD Pollard
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Sodium Phosphate ◽  
Osmium Tetroxide ◽  
Time Span ◽  
Cross Linking ◽  
Muscle Actin ◽  
Viscosity Change ◽  
Sodium Phosphate Buffer ◽  
Sulfur Containing

We have studied the destruction of purified muscle actin filaments by osmium tetroxide (OsO4) to develop methods to preserve actin filaments during preparation for electron microscopy. Actin filaments are fragmented during exposure to OsO4. This causes the viscosity of solutions of actin filaments to decrease, ultimately to zero, and provides a convenient quantitative assay to analyze the reaction. The rate of filament destruction is determined by the OsO4 concentration, temperature, buffer type and concentration, and pH. Filament destruction is minimized by treatment with a low concentration of OsO4 in sodium phosphate buffer, pH 6.0, at 0 degrees C. Under these conditions, the viscosity of actin filament solutions is stable and actin filaments retain their straight, unbranched structure, even after dehydration and embedding. Under more severe conditions, the straight actin filaments are converted into what look like the microfilament networks commonly observed in cells fixed with OsO4. Destruction of actin filaments can be inhibited by binding tropomyosin to the actin. Cross-linking the actin molecules within a filament with glutaraldehyde does not prevent their destruction by OsO4. The viscosity decrease requires the continued presence of free OsO4. During the time of the viscosity change, OsO4 is reduced and the sulfur-containing amino acids of actin are oxidized, but little of the osmium is bound to the actin. Over a much longer time span, the actin molecules are split into discrete peptides.

scholarly journals Nerve growth cone lamellipodia contain two populations of actin filaments that differ in organization and polarity.

1992 ◽  
Vol 119 (5) ◽  
pp. 1219-1243 ◽  
Author(s):  
A K Lewis ◽  
P C Bridgman
Keyword(s):  
Actin Filament ◽  
Growth Cone ◽  
Actin Filaments ◽  
Membrane Surface ◽  
Leading Edge ◽  
Growth Cones ◽  
Differential Interference Contrast Microscopy ◽  
Nerve Growth ◽  
Filament Bundles ◽  
Two Populations

The organization and polarity of actin filaments in neuronal growth cones was studied with negative stain and freeze-etch EM using a permeabilization protocol that caused little detectable change in morphology when cultured nerve growth cones were observed by video-enhanced differential interference contrast microscopy. The lamellipodial actin cytoskeleton was composed of two distinct subpopulations: a population of 40-100-nm-wide filament bundles radiated from the leading edge, and a second population of branching short filaments filled the volume between the dorsal and ventral membrane surfaces. Together, the two populations formed the three-dimensional structural network seen within expanding lamellipodia. Interaction of the actin filaments with the ventral membrane surface occurred along the length of the filaments via membrane associated proteins. The long bundled filament population was primarily involved in these interactions. The filament tips of either population appeared to interact with the membrane only at the leading edge; this interaction was mediated by a globular Triton-insoluble material. Actin filament polarity was determined by decoration with myosin S1 or heavy meromyosin. Previous reports have suggested that the polarity of the actin filaments in motile cells is uniform, with the barbed ends toward the leading edge. We observed that the actin filament polarity within growth cone lamellipodia is not uniform; although the predominant orientation was with the barbed end toward the leading edge (47-56%), 22-25% of the filaments had the opposite orientation with their pointed ends toward the leading edge, and 19-31% ran parallel to the leading edge. The two actin filament populations display distinct polarity profiles: the longer filaments appear to be oriented predominantly with their barbed ends toward the leading edge, whereas the short filaments appear to be randomly oriented. The different length, organization and polarity of the two filament populations suggest that they differ in stability and function. The population of bundled long filaments, which appeared to be more ventrally located and in contact with membrane proteins, may be more stable than the population of short branched filaments. The location, organization, and polarity of the long bundled filaments suggest that they may be necessary for the expansion of lamellipodia and for the production of tension mediated by receptors to substrate adhesion molecules.

scholarly journals Structural organization of actin in the sea urchin egg cortex: microvillar elongation in the absence of actin filament bundle formation

1982 ◽  
Vol 93 (1) ◽  
pp. 24-32 ◽  
Author(s):  
DA Begg ◽  
LI Rebhun ◽  
H Hyatt
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Actin Filaments ◽  
Calcium Ionophore ◽  
Ionophore A23187 ◽  
Acid Activation ◽  
Cytoplasmic Ph ◽  
Sea Urchin Egg ◽  
Filament Bundles ◽  
Filament Bundle

We have investigated the relationship between the formation of actin filament bundles and the elongation of microvilli (MV) after fertilization in sea urchin eggs. In a previous study (1979, J Cell Biol. 83:241-248) we demonstrated that increased pH induced the formation of actin filaments in isolated sea urchin egg cortices with the concomitant elongation of MV. On the basis of these results we suggested that increased cytoplasmic pH after fertilization causes a reorganization of cortical actin, which in turn provides the force for MV elongation. To test this hypothesis, we compared the morphology of microvilli in eggs activated with and without the release of fertilization acid. Activation of eggs in normal sea water with the calcium ionophore A23187 causes the release of fertilization acid and the elongation of MV containing core bundles of actin filaments. Eggs activated with A23187 in NA(+)-free water do not undergo normal fertilization acid release but develop elongated, flaccid MV. These MV contain an irregular network of actin filaments rather than the parallel bundles of filaments found in normal MV. The addition of 40 mM NaCl to these eggs results in the release of H(+) and the concomitant conversion of flaccid MV to erect MV containing typical core bundles of actin filaments. Identical results are obtained when 10 mM NH(4)Cl is substituted for NaCl. The induction of cytoplasmic alkalinization in unactivated eggs with NH(4)Cl does not cause either MV elongation or the formation of actin filament bundles . These results suggest that: (a) the elongation of MV is stimulated by a rise in intracellular free Ca(++) concentration; (b) actin filament bundle formation is triggered by an increase in cytoplasmic pH; and (c) the formation of actin filament bundles is not necessary for MV elongation but is required to provide rigid support for MV.

Coagulation factor Va is an actin filament binding and cross-linking protein

1995 ◽  
Vol 73 (1-2) ◽  
pp. 105-112 ◽  
Author(s):  
Emilia Furmaniak-Kazmierczak ◽  
Michael E. Nesheim ◽  
Graham P. Côté
Keyword(s):  
Actin Filament ◽  
Light Chain ◽  
Actin Filaments ◽  
Factor Xa ◽  
Coagulation Factor ◽  
Actin Binding ◽  
Cross Linking ◽  
Factor V ◽  
Proteolytic Activation ◽  
Factor Va

Bovine coagulation cofactor factor Va is shown to bind to filaments of skeletal muscle actin with a dissociation constant of 40–50 nM in the presence of 50 mM NaCl. At saturation, approximately one molecule of factor Va was bound for every two actin molecules. The binding of factor Va to F-actin was inhibited by increasing ionic strength, being approximately 20-fold weaker at 150 mM NaCl. Addition of factor Va dramatically increased both the low-speed sedimentation and the low-shear viscosity of actin filament solutions, indicating that factor Va cross-links actin filaments. Factor Va also bound to actin filaments saturated with myosin. The isolated 74-kilodalton light chain of factor Va displayed actin binding and cross-linking properties indistinguishable from those of intact factor Va. The procofactor factor V bound weakly to F-actin, indicating that proteolytic activation is required to uncover the actin binding sites within the light chain domain. Actin filaments had only a slight inhibitory effect on the prothombinase activity of the factor Va – factor Xa – phospholipid complex. Since high concentrations of actin filaments can be exposed to the circulation when cells are damaged, the interaction of factor Va with actin may be of physiological relevance.Key words: blood coagulation, factor V, actin.

scholarly journals Palladin Is a Regulator of Actin Filament Bundles at the Ectoplasmic Specialization in Adult Rat Testes

Endocrinology ◽  
2013 ◽  
Vol 154 (5) ◽  
pp. 1907-1920 ◽  
Author(s):  
Xiaojing Qian ◽  
Dolores D. Mruk ◽  
Elissa W. P. Wong ◽  
Pearl P. Y. Lie ◽  
C. Yan Cheng
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Plasma Membranes ◽  
Permeability Barrier ◽  
Protein Distribution ◽  
Filament Bundles ◽  
Ectoplasmic Specialization ◽  
Blood Testis Barrier

Abstract In rat testes, the ectoplasmic specialization (ES) at the Sertoli-Sertoli and Sertoli-spermatid interface known as the basal ES at the blood-testis barrier and the apical ES in the adluminal compartment, respectively, is a testis-specific adherens junction. The remarkable ultrastructural feature of the ES is the actin filament bundles that sandwiched in between the cisternae of endoplasmic reticulum and apposing plasma membranes. Although these actin filament bundles undergo extensive reorganization to switch between their bundled and debundled state to facilitate blood-testis barrier restructuring and spermatid adhesion/transport, the regulatory molecules underlying these events remain unknown. Herein we report findings of an actin filament cross-linking/bundling protein palladin, which displayed restrictive spatiotemporal expression at the apical and the basal ES during the epithelial cycle. Palladin structurally interacted and colocalized with Eps8 (epidermal growth factor receptor pathway substrate 8, an actin barbed end capping and bundling protein) and Arp3 (actin related protein 3, which together with Arp2 form the Arp2/3 complex to induce branched actin nucleation, converting bundled actin filaments to an unbundled/branched network), illustrating its role in regulating actin filament bundle dynamics at the ES. A knockdown of palladin in Sertoli cells in vitro with an established tight junction (TJ)-permeability barrier was found to disrupt the TJ function, which was associated with a disorganization of actin filaments that affected protein distribution at the TJ. Its knockdown in vivo also perturbed F-actin organization that led to a loss of spermatid polarity and adhesion, causing defects in spermatid transport and spermiation. In summary, palladin is an actin filament regulator at the ES.

Sign in / Sign up

Export Citation Format

Share Document