scholarly journals Human platelet myosin. II. In vitro assembly and structure of myosin filaments.

1975 ◽  
Vol 67 (1) ◽  
pp. 72-92 ◽  
Author(s):  
R Niederman ◽  
T D Pollard
Keyword(s):  
Electron Microscopy ◽  
Ionic Strength ◽  
Thin Section ◽  
Human Platelet ◽  
Myosin Ii ◽  
Myosin Molecule ◽  
Myosin Filaments ◽  
In Vitro Assembly ◽  
Myosin Rod

We have used electron microscopy and solubility measurements to investigate the assembly and structure of purified human platelet myosin and myosin rod into filaments. In buffers with ionic strengths of less than 0.3 M, platelet myosin forms filaments which are remarkable for their small size, being only 320 nm long and 10-11 nm wide in the center of the bare zone. The dimensions of these filaments are not affected greatly by variation of the pH between 7 and 8, variation of the ionic strength between 0.05 and 0.2 M, the presence or absence of 1 mM Mg++ or ATP, or variation of the myosin concentration between 0.05 and 0.7 mg/ml. In 1 mM Ca++ and at pH 6.5 the filaments grow slightly larger. More than 90% of purified platelet myosin molecules assemble into filaments in 0.1 M KC1 at pH 7. Purified preparations of the tail fragment of platelet myosin also form filaments. These filaments are slightly larger than myosin filaments formed under the same conditions, indicating that the size of the myosin filaments may be influenced by some interaction between the head and tail portions of myosin molecules. Calculations based on the size and shape of the myosin filaments, the dimensions of the myosin molecule and analysis of the bare zone reveal that the synthetic platelet myosin filaments consists of 28 myosin molecules arranged in a bipolar array with the heads of two myosin molecules projecting from the backbone of the filament at 14-15 nm intervals. The heads appear to be loosely attached to the backbone by a flexible portion of the myosin tail. Given the concentration of myosin in platelets and the number of myosin molecules per filament, very few of these thin myosin filaments should be present in a thin section of a platelet, even if all of the myosin molecules are aggregated into filaments.

scholarly journals Heparin-induced tau filaments are polymorphic and differ from those in Alzheimer’s and Pick’s diseases

eLife ◽  
2019 ◽  
Vol 8 ◽  
Author(s):  
Wenjuan Zhang ◽  
Benjamin Falcon ◽  
Alexey G Murzin ◽  
Juan Fan ◽  
R Anthony Crowther ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Neurodegenerative Diseases ◽  
Protein Tau ◽  
Microtubule Associated Protein Tau ◽  
The Third ◽  
In Vitro Assembly ◽  
Immuno Electron Microscopy ◽  
Structural Versatility ◽  
Filamentous Inclusions

Assembly of microtubule-associated protein tau into filamentous inclusions underlies a range of neurodegenerative diseases. Tau filaments adopt different conformations in Alzheimer’s and Pick’s diseases. Here, we used cryo- and immuno- electron microscopy to characterise filaments that were assembled from recombinant full-length human tau with four (2N4R) or three (2N3R) microtubule-binding repeats in the presence of heparin. 2N4R tau assembles into multiple types of filaments, and the structures of three types reveal similar ‘kinked hairpin’ folds, in which the second and third repeats pack against each other. 2N3R tau filaments are structurally homogeneous, and adopt a dimeric core, where the third repeats of two tau molecules pack in a parallel manner. The heparin-induced tau filaments differ from those of Alzheimer’s or Pick’s disease, which have larger cores with different repeat compositions. Our results illustrate the structural versatility of amyloid filaments, and raise questions about the relevance of in vitro assembly.

scholarly journals The mechanism of assembly of Acanthamoeba myosin-II minifilaments: minifilaments assemble by three successive dimerization steps.

1989 ◽  
Vol 109 (4) ◽  
pp. 1537-1547 ◽  
Author(s):  
J H Sinard ◽  
W F Stafford ◽  
T D Pollard
Keyword(s):  
Electron Microscopy ◽  
Light Scattering ◽  
Ionic Strength ◽  
Analytical Ultracentrifugation ◽  
Myosin Ii ◽  
Alkaline Ph ◽  
Predominant Species ◽  
Assembly Mechanism ◽  
Rapid Equilibrium ◽  
Low Ionic Strength

We used 90 degrees light scattering, analytical ultracentrifugation, and electron microscopy to deduce that Acanthamoeba myosin-II minifilaments, composed of eight molecules each, assemble by a novel mechanism consisting of three successive dimerization steps rather than by the addition of monomers or parallel dimers to a nucleus. Above 200 mM KCl, Acanthamoeba myosin-II is monomeric. At low ionic strength (less than 100 mM KCl), myosin-II polymerizes into bipolar minifilaments. Between 100 and 200 mM KCl, plots of light scattering vs. myosin concentration all extrapolate to the origin but have slopes which decrease with increasing KCl. This indicates that structures intermediate in size between monomers and full length minifilaments are formed, and that the critical concentrations for assembly of these structures is very low. Analytical ultracentrifugation has confirmed that intermediate structures exist at these salt concentrations, and that they are in rapid equilibrium with each other. We believe these structures represent assembly intermediates and have used equilibrium analytical ultracentrifugation and electron microscopy to identify them. Polymerization begins with the formation of antiparallel dimers, with the two tails overlapping by approximately 15 nm. Two antiparallel dimers then associated with a 15-nm stagger to form an antiparallel tetramer. Finally, two tetramers associate with a 30-nm stagger to form the completed minifilament. At very low ionic strengths, the last step in the assembly mechanism is largely reversed and antiparallel tetramers are the predominant species. Alkaline pH, which can also induce minifilament disassembly, produces the same assembly intermediates as are found for salt induced disassembly.

scholarly journals Site-specific inhibition of myosin-mediated motility in vitro by monoclonal antibodies.

1985 ◽  
Vol 100 (4) ◽  
pp. 1024-1030 ◽  
Author(s):  
P F Flicker ◽  
G Peltz ◽  
M P Sheetz ◽  
P Parham ◽  
J A Spudich
Keyword(s):  
Electron Microscopy ◽  
Monoclonal Antibodies ◽  
Binding Sites ◽  
Functional Assay ◽  
Specific Inhibition ◽  
Myosin Molecule ◽  
Site Specific ◽  
Dictyostelium Myosin ◽  
Cell Biol

Monoclonal antibodies directed against seven different sites on Dictyostelium myosin (Peltz, G., J. A. Spudich, and P. Parham, 1985, J. Cell Biol., 100: 1016-1023) were tested for their ability to inhibit movement of myosin in vitro, using the Nitella-based myosin-mediated bead movement assay (Sheetz, M. P., R. Chasan, and J. A. Spudich, 1984, J. Cell Biol., 99: 1867-1871). To complement this functional assay, we located the binding sites of these antibodies by electron microscopy, using the rotary shadowing technique. One antibody bound to the 18,000-dalton light chain and inhibited movement completely. All of the remaining antibodies bound to various positions along the rod portion of the myosin molecule, which is approximately 1,800 A long. Antibodies that bound to the rod about 470, 680, and 1400 A from the head-tail junction did not alter myosin movement. One antibody appeared to bind very close to the head-tail junction and to inhibit movement 50%. Surprisingly, three antibodies that bound about 1,200 A from the head-tail junction inhibited movement completely. This inhibition did not depend on using intact IgG, since Fab' fragments had the same effect.

scholarly journals Muscle myosins form folded monomers, dimers, and tetramers during filament polymerization in vitro

2020 ◽  
Vol 117 (27) ◽  
pp. 15666-15672
Author(s):  
Xiong Liu ◽  
Shi Shu ◽  
Edward D. Korn
Keyword(s):  
Electron Microscopy ◽  
Smooth Muscle ◽  
Muscle Contraction ◽  
Actin Filaments ◽  
Critical Concentration ◽  
Smooth Muscle Myosin ◽  
Myosin Filaments ◽  
Muscle Myosin

Muscle contraction depends on the cyclical interaction of myosin and actin filaments. Therefore, it is important to understand the mechanisms of polymerization and depolymerization of muscle myosins. Muscle myosin 2 monomers exist in two states: one with a folded tail that interacts with the heads (10S) and one with an unfolded tail (6S). It has been thought that only unfolded monomers assemble into bipolar and side-polar (smooth muscle myosin) filaments. We now show by electron microscopy that, after 4 s of polymerization in vitro in both the presence (smooth muscle myosin) and absence of ATP, skeletal, cardiac, and smooth muscle myosins form tail-folded monomers without tail–head interaction, tail-folded antiparallel dimers, tail-folded antiparallel tetramers, unfolded bipolar tetramers, and small filaments. After 4 h, the myosins form thick bipolar and, for smooth muscle myosin, side-polar filaments. Nonphosphorylated smooth muscle myosin polymerizes in the presence of ATP but with a higher critical concentration than in the absence of ATP and forms only bipolar filaments with bare zones. Partial depolymerization in vitro of nonphosphorylated smooth muscle myosin filaments by the addition of MgATP is the reverse of polymerization.

scholarly journals Smitin, a novel smooth muscle titin–like protein, interacts with myosin filaments in vivo and in vitro

2002 ◽  
Vol 156 (1) ◽  
pp. 101-112 ◽  
Author(s):  
Kyoungtae Kim ◽  
Thomas C.S. Keller
Keyword(s):  
Smooth Muscle ◽  
Ionic Strength ◽  
Smooth Muscle Cells ◽  
Muscle Cells ◽  
Smooth Muscle Myosin ◽  
Globular Domain ◽  
Contractile Apparatus ◽  
Myosin Filaments ◽  
Muscle Myosin

Smooth muscle cells use an actin–myosin II-based contractile apparatus to produce force for a variety of physiological functions, including blood pressure regulation and gut peristalsis. The organization of the smooth muscle contractile apparatus resembles that of striated skeletal and cardiac muscle, but remains much more poorly understood. We have found that avian vascular and visceral smooth muscles contain a novel, megadalton protein, smitin, that is similar to striated muscle titin in molecular morphology, localization in a contractile apparatus, and ability to interact with myosin filaments. Smitin, like titin, is a long fibrous molecule with a globular domain on one end. Specific reactivities of an anti-smitin polyclonal antibody and an anti-titin monoclonal antibody suggest that smitin and titin are distinct proteins rather than differentially spliced isoforms encoded by the same gene. Smitin immunofluorescently colocalizes with myosin in chicken gizzard smooth muscle, and interacts with two configurations of smooth muscle myosin filaments in vitro. In physiological ionic strength conditions, smitin and smooth muscle myosin coassemble into irregular aggregates containing large sidepolar myosin filaments. In low ionic strength conditions, smitin and smooth muscle myosin form highly ordered structures containing linear and polygonal end-to-end and side-by-side arrays of small bipolar myosin filaments. We have used immunogold localization and sucrose density gradient cosedimentation analyses to confirm association of smitin with both the sidepolar and bipolar smooth muscle myosin filaments. These findings suggest that the titin-like protein smitin may play a central role in organizing myosin filaments in the contractile apparatus and perhaps in other structures in smooth muscle cells.

scholarly journals Myosin II filament assemblies in the active lamella of fibroblasts: their morphogenesis and role in the formation of actin filament bundles.

1995 ◽  
Vol 131 (4) ◽  
pp. 989-1002 ◽  
Author(s):  
A B Verkhovsky ◽  
T M Svitkina ◽  
G G Borisy
Keyword(s):  
Electron Microscopy ◽  
Actin Filament ◽  
Mammalian Cells ◽  
Myosin Ii ◽  
Myosin Filament ◽  
Actin Bundles ◽  
Fluorescence And Electron Microscopy ◽  
Myosin Filaments ◽  
Filament Bundles ◽  
Filament Network

The morphogenesis of myosin II structures in active lamella undergoing net protrusion was analyzed by correlative fluorescence and electron microscopy. In rat embryo fibroblasts (REF 52) microinjected with tetramethylrhodamine-myosin II, nascent myosin spots formed close to the active edge during periods of retraction and then elongated into wavy ribbons of uniform width. The spots and ribbons initially behaved as distinct structural entities but subsequently aligned with each other in a sarcomeric-like pattern. Electron microscopy established that the spots and ribbons consisted of bipolar minifilaments associated with each other at their head-containing ends and arranged in a single row in an "open" zig-zag conformation or as a "closed" parallel stack. Ribbons also contacted each other in a nonsarcomeric, network-like arrangement as described previously (Verkhovsky and Borisy, 1993. J. Cell Biol. 123:637-652). Myosin ribbons were particularly pronounced in REF 52 cells, but small ribbons and networks were found also in a range of other mammalian cells. At the edge of the cell, individual spots and open ribbons were associated with relatively disordered actin filaments. Further from the edge, myosin filament alignment increased in parallel with the development of actin bundles. In actin bundles, the actin cross-linking protein, alpha-actinin, was excluded from sites of myosin localization but concentrated in paired sites flanking each myosin ribbon, suggesting that myosin filament association may initiate a pathway for the formation of actin filament bundles. We propose that zig-zag assemblies of myosin II filaments induce the formation of actin bundles by pulling on an actin filament network and that co-alignment of actin and myosin filaments proceeds via folding of myosin II filament assemblies in an accordion-like fashion.

scholarly journals Endotoxin-induced changes in human platelet membranes: morphologic evidence

Blood ◽  
1978 ◽  
Vol 51 (3) ◽  
pp. 487-495 ◽  
Author(s):  
DH Ausprunk ◽  
J Das
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Platelet ◽  
Human Platelets ◽  
Free Medium ◽  
Platelet Surface ◽  
Low Concentrations ◽  
Induced Changes ◽  
Scanning Electron

Abstract Interaction between human platelets and bacterial endotoxin was studied in vitro with transmission and scanning electron microscopy. Washed human platelets, whose aggregation was blocked with apyrase, were incubated in a plasma-free medium containing crude endotoxin that had previously been complexed with copper. Thirty minutes of incubation resulted in adherence of endotoxin particles to the platelet surface, breaks in the platelet plasma membrane with apparent attempts at repair, pseudoped formation, and centralization of platelet organelles. Copper appeared to potentiate these phenomena, since neither Cu2+ at low concentrations nor endotoxin alone altered the morphology of the platelet membrane. This platelet-endotoxin interaction may be an intermediary step in the detoxification and clearance of endotoxin from the plasma.

scholarly journals Endotoxin-induced changes in human platelet membranes: morphologic evidence

Blood ◽  
1978 ◽  
Vol 51 (3) ◽  
pp. 487-495
Author(s):  
DH Ausprunk ◽  
J Das
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Platelet ◽  
Human Platelets ◽  
Free Medium ◽  
Platelet Surface ◽  
Low Concentrations ◽  
Induced Changes ◽  
Scanning Electron

Interaction between human platelets and bacterial endotoxin was studied in vitro with transmission and scanning electron microscopy. Washed human platelets, whose aggregation was blocked with apyrase, were incubated in a plasma-free medium containing crude endotoxin that had previously been complexed with copper. Thirty minutes of incubation resulted in adherence of endotoxin particles to the platelet surface, breaks in the platelet plasma membrane with apparent attempts at repair, pseudoped formation, and centralization of platelet organelles. Copper appeared to potentiate these phenomena, since neither Cu2+ at low concentrations nor endotoxin alone altered the morphology of the platelet membrane. This platelet-endotoxin interaction may be an intermediary step in the detoxification and clearance of endotoxin from the plasma.

Electron microscopy of myosin molecules

1984 ◽  
Vol 42 ◽  
pp. 176-179
Author(s):  
Roger Craig
Keyword(s):  
Electron Microscopy ◽  
Cell Division ◽  
The Other ◽  
Myosin Molecule ◽  
Sliding Mechanism ◽  
Myosin Filaments ◽  
Nonmuscle Cells ◽  
Main Protein ◽  
Hydrolysis Of ◽  
Sliding Force

Myosin is the major contractile protein of muscle, where it exists as a filamentous polymer (about 1.6μm long and 15nm in diameter) containing several hundred myosin molecules. The myosin filaments overlap with filaments of actin (the other main protein of muscle) and contraction is brought about by a sliding of these two filament types past each other. The sliding force is generated by a portion of each myosin molecule (the myosin crossbridge) which projects from the surface of the filament and attaches cyclically to actin in a manner which “rows” the filaments past each other. The energy for rowing comes from the hydrolysis of ATP by the myosin crossbridges, a process that is activated by their interaction with actin. Myosin also occurs in many nonmuscle cells where, together with actin, it generates a variety of motile activities (e.g. cell division) by a mechanism that is probably similar to the sliding mechanism occurring in muscle.

Sign in / Sign up

Export Citation Format

Share Document