Microplot Sampling of Fire Behavior on Populus tremuloides Stands in North-Central Colorado

1993 ◽  
Vol 3 (2) ◽  
pp. 85 ◽  
Author(s):  
JK Smith ◽  
RD Laven ◽  
PN Omi
Keyword(s):  
Populus Tremuloides ◽  
Fire Behavior ◽  
Fire Effects ◽  
Flame Length ◽  
Fire Intensity ◽  
Total Heat Release ◽  
Spread Rate ◽  
North Central ◽  
Area Burned ◽  
In Fire

Fire behavior research has traditionally used whole burns as sampling units. Numerous burns were required to quantify relationships between pre-burn descriptors, fire behavior, and fire effects. Recent studies have used small plots within burns (called microplots) as the sampling units. This study measured pre-burn descriptors and fire behavior on 0.75-m2 microplots in two Populus tremuloides Michx. burns in north-central Colorado. Microplot estimates of woody fuels, spread rate, and area burned were comparable with measurements from whole burns. Two methods of estimating fire intensity on microplots produced inconsistent results. Juniperus communis L. patches burned more intensely and released more heat than herbaceous areas. Duff characteristics were the most useful pre-burn descriptors for predicting area burned, spread rate, flame length, and total heat release. Microplot sampling on two bums enabled us to relate variability in fire behavior to pre-burn characteristics and to obtain replicate estimates of these relationships.

scholarly journals The Impact of Fuel Treatments on Wildfire Behavior in North American Boreal Fuels: A Simulation Study Using FIRETEC

Fire ◽  
2020 ◽  
Vol 3 (2) ◽  
pp. 18 ◽  
Author(s):  
Ginny Marshall ◽  
Dan Thompson ◽  
Kerry Anderson ◽  
Brian Simpson ◽  
Rodman Linn ◽  
...  
Keyword(s):  
Black Spruce ◽  
Treatment Options ◽  
Fire Behavior ◽  
Fire Spread ◽  
Natural Forests ◽  
Spread Rate ◽  
Multiple Components ◽  
In Fire ◽  
The Impact ◽  
Common Tree

Current methods of predicting fire spread in Canadian forests are suited to large wildfires that spread through natural forests. Recently, the use of mechanical and thinning treatments of forests in the wildland-urban interface of Canada has increased. To assist in community wildfire protection planning in forests not covered by existing operational fire spread models, we use FIRETEC to simulate fire spread in lowland black spruce fuel structures, the most common tree stand in Canada. The simulated treatments included the mechanical mulching of strips, and larger, irregularly shaped areas. In all cases, the removal of fuel by mulch strips broke up the fuels, but also caused wind speed increases, so little decrease in fire spread rate was modelled. For large irregular clearings, the fire spread slowly through the mulched wood chips, and large decreases in fire spread and intensity were simulated. Furthermore, some treatments in the black spruce forest were found to be effective in decreasing the distance and/or density of firebrands. The simulations conducted can be used alongside experimental fires and documented wildfires to examine the effectiveness of differing fuel treatment options to alter multiple components of fire behavior.

Fire effects on the spatial patterns of soil resources in a Nicaraguan wet tropical forest

2005 ◽  
Vol 21 (4) ◽  
pp. 435-444 ◽  
Author(s):  
Brent C. Blair
Keyword(s):  
Leaf Litter ◽  
Tropical Forests ◽  
Forest Fires ◽  
Soil Heterogeneity ◽  
Fire Effects ◽  
Fire Intensity ◽  
Vegetative Cover ◽  
Soil Resources ◽  
In Fire ◽  
The Impact

Anthropogenic wildfires are becoming increasingly frequent in wet tropical forests. This trend follows that of other anthropogenic disturbances, which are now acute and widespread. Fires pose a potentially serious threat to tropical forests. However, little is known about the impact of unintended forest fires on below-ground resources in these ecosystems. This study investigated the influence of fires on the distribution and variability of soil resources on two sets of 50×50-m burned and unburned plots in a Nicaraguan rain forest. Samples were collected at 5-m intervals throughout each plot as well as subsamples at 50-cm intervals. Geostatistical techniques as well as univariate statistics were used to quantify the spatial autocorrelation and variability of selected nutrients (N, P and K), carbon and standing leaf litter. Most variability in this forest was spatially dependent at a scale of 30 m or less. However the average range of autocorrelations varied greatly between properties and sites. Burning altered soil heterogeneity by decreasing the range over which soil properties were autocorrelated. Overall the average patch size (range) for nitrogen was reduced by 7%, phosphorus by 52%, potassium by 60% and carbon by 43%. While phosphorus and leaf litter increased in the burned plots compared to unburned plots, potassium was not different. Nitrogen and carbon did not display a consistent pattern between burning regimes and this may be explained by variation in fire intensity. Leaf litter measurements did not correlate with measured soil nutrients within plots. Observed changes in the burned forest were likely a result of both the intensity of burning and change in vegetative cover between the time of the fires and soil sampling.

Flame characteristics of wind-driven surface fires

1986 ◽  
Vol 16 (6) ◽  
pp. 1293-1300 ◽  
Author(s):  
Ralph M. Nelson Jr. ◽  
Carl W. Adkins
Keyword(s):  
Boundary Layer ◽  
Tilt Angle ◽  
Fire Behavior ◽  
Flame Length ◽  
Fire Intensity ◽  
Square Root ◽  
Pine Needle ◽  
Weather Variables ◽  
Practical Applications ◽  
Surface Fires

Twenty-two fires in a laboratory wind tunnel and 8 field fires were studied with video techniques to determine relationships between their flame characteristics and fire behavior. The laboratory fires were in pine needle fuel beds with and without an overlying stratum of live vegetation. These fuels simulated 2-year roughs in southeastern fuel types. The field bums were in 1- and 2-year roughs in similar fuels. Byram's fire intensity ranged from 98 to 590 kW/m in the laboratory, and from 355 to 2755 kW/m in the field. Flame lengths were proportional to the square root of fire intensity when fuel consumption exceeded 0.5 kg/m2, in agreement with predictions from buoyant flame theory. However, for burns in the needle layer (consumption approximately 0.5 kg/m2), flame lengths were constant at about 0.5 m, regardless of intensity. Similar values were observed on two of the field fires. It is speculated that flame length is limited by a boundary layer pattern for the overall flow, even though the flames themselves did not exhibit boundary layer characteristics. Also, laboratory correlations of flame tilt angle and fire intensity with other fire and weather variables depart from buoyant flame theory. Further study under field conditions is needed before relationships involving flame tilt angle, fire intensity, and wind speed should be used in practical applications.

scholarly journals Remote sensing techniques to assess active fire characteristics and post-fire effects

2006 ◽  
Vol 15 (3) ◽  
pp. 319 ◽  
Author(s):  
Leigh B. Lentile ◽  
Zachary A. Holden ◽  
Alistair M. S. Smith ◽  
Michael J. Falkowski ◽  
Andrew T. Hudak ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Fire Severity ◽  
Fire Behavior ◽  
Fire Effects ◽  
Ecological Effects ◽  
Fire Intensity ◽  
Active Fire ◽  
Post Fire Effects ◽  
Remote Sensing Techniques ◽  
Fire Characteristics

Space and airborne sensors have been used to map area burned, assess characteristics of active fires, and characterize post-fire ecological effects. Confusion about fire intensity, fire severity, burn severity, and related terms can result in the potential misuse of the inferred information by land managers and remote sensing practitioners who require unambiguous remote sensing products for fire management. The objective of the present paper is to provide a comprehensive review of current and potential remote sensing methods used to assess fire behavior and effects and ecological responses to fire. We clarify the terminology to facilitate development and interpretation of comprehensible and defensible remote sensing products, present the potential and limitations of a variety of approaches for remotely measuring active fires and their post-fire ecological effects, and discuss challenges and future directions of fire-related remote sensing research.

Examining fire behavior in mesquite - acacia shrublands

2005 ◽  
Vol 14 (2) ◽  
pp. 131 ◽  
Author(s):  
Tamara J. Streeks ◽  
M. Keith Owens ◽  
Steve G. Whisenant
Keyword(s):  
Flame Temperature ◽  
Fire Behavior ◽  
Fire Spread ◽  
Flame Length ◽  
South Texas ◽  
Fire Intensity ◽  
Rate Of Spread ◽  
Vegetation Shift ◽  
Naturally Occurring ◽  
Behavior Systems

The vegetation of South Texas has changed from mesquite savanna to mixed mesquite–acacia (Prosopis–Acacia) shrubland over the last 150 years. Fire reduction, due to lack of fine fuel and suppression of naturally occurring fires, is cited as one of the primary causes for this vegetation shift. Fire behavior, primarily rate of spread and fire intensity, is poorly understood in these communities, so fire prescriptions have not been developed. We evaluated two current fire behavior systems (BEHAVE and the CSIRO fire spread and fire danger calculator) and three models developed for shrublands to determine how well they predicted rate of spread and flame length during three summer fires within mesquite–acacia shrublands. We also used geostatistical analyses to examine the spatial pattern of net heat, flame temperature and fuel characteristics. The CSIRO forest model under-predicted the rate of fire spread by an average of 5.43 m min−1 and over-predicted flame lengths by 0.2 m while the BEHAVE brush model under-predicted rate of spread by an average of 6.57 m min−1 and flame lengths by an average of 0.33 m. The three shrubland models did not consistently predict the rate of spread in these plant communities. Net heat and flame temperature were related to the amount of 10-h fuel on the site, but were not related to the cover of grasses, forbs, shrubs, or apparent continuity of fine fuel. Fuel loads were typical of South Texas shrublands, in that they were uneven and spatially inconsistent, which resulted in an unpredictable fire pattern.

Fire Regime and the Abundance of Red Pine

1993 ◽  
Vol 3 (4) ◽  
pp. 241 ◽  
Author(s):  
MD Flannigan
Keyword(s):  
Fire Regime ◽  
Fire Behavior ◽  
Rare Event ◽  
Weather Conditions ◽  
Red Pine ◽  
Fire Intensity ◽  
Fire Weather ◽  
Fire Weather Index ◽  
Area Burned ◽  
Forward Stepwise

Red pine (Pinus resinosa Ait.) is a fire-dependent species. This study examines the relationship between the fire regime and the abundance of red pine. The fire regime is represented by components of the Canadian Fire Weather Index System and outputs from the Canadian Fire Behavior Prediction System as well as the average area burned and the percentage of conifers of each forest section. Extreme as well as averages values were used in this analysis as a large forest fire is a rare event that can occur on only a few days of the year under extreme fire weather conditions. Results from a forward-stepwise regression explained about 70% of die variance in red pine volume (abundance) data. Variables selected in the regression analysis included extreme headfire intensity, area burned and average drought code. These results suggest that abundance of red pine and other fire affected tree species is directly related to the aspects of the fire regime such as fire intensity.

Fire Behavior and Fire Effects on Eastern Redcedar in Hardwood Leaf-Litter Fires

1995 ◽  
Vol 5 (3) ◽  
pp. 135 ◽  
Author(s):  
DM Engle ◽  
JF Stritzke
Keyword(s):  
Leaf Litter ◽  
Fire Behavior ◽  
Late Summer ◽  
Ambient Air ◽  
Fire Effects ◽  
Cross Timbers ◽  
Fuel Loading ◽  
Eastern Redcedar ◽  
Crown Scorch ◽  
In Fire

Treatment of stands of hardwoods in the cross timbers of the central United States with tebuthiuron (N-[5-(1,1-dimethylethyl)-1,3,4-thiadiazol-2-yl]-dimethylurea) can significantly decrease canopy cover of hardwoods. However, at the rate used for hardwood control, tebuthiuron does not control eastern redcedar (Juniperus virginiana L.). Our objective was to determine the potential of using fires in the hardwood leaf litter, either before or after tebuthiuron, for controlling eastern redcedar. To do this, we compared fuelbed characteristics, fire behavior, and fire effects on eastern redcedar in naturally occurring hardwood leaf litter with those augmented by leaves dropped following a single application of tebuthiuron. Studies were conducted in 1988, 1989, and 1991 on a cross timbers site dominated by an overstory of post oak (Quercus stellata Wangenh.) and blackjack oak (Q. marilandica Muenchh.) and with eastern redcedar in the understory. Factors evaluated included herbicide treatment (tebuthiuron or no herbicide) and burning season (late summer or winter). Tebuthiuron at 2.2 kg a.i. Ha-1 was applied to plots (25 X 25 m) in March of the study years. In late summer, tebuthiuron-treated plots contained almost twice the 1-hr fuel loading as untreated plots. Fuel depth on untreated plots in late summer was about half that of other herbicide treatments and burning date combinations. Fuel loading on plots burned in winter was not affected by tebuthiuron treatment, and no differences in fuel consumption were detected among any treatments. Moisture content of 1-hr fuels on plots burned in winter was more than twice that of 1-hr fuels on plots burned in late summer. Fire intensity was low with all bums, and no differences in fire behavior were detected among any treatments. Crown scorch of 75% or greater on small eastern redcedar trees was considered a successful burn, and this resulted on all but the late summer-no tebuthiuron treatment. The natural log of fireline intensity explained about 47% (P<0.0006)) of the variation in fire success, and ambient air temperature explained an additional 19% (P<0.0468). Although tebuthiuron treatments effectively augmented leaf-litter fuel load by late-summer and provided a suitable fuelbed for burning, crown scorch and tree kill were not greatly improved by burning in late summer as compared to winter. We conclude that understory eastern redcedar can be controlled successfully by burning leaf-litter fuelbeds in either late fall or winter after natural leaf-fall from hardwood trees or in late summer, fall, or winter following a spring application of tebuthiuron for control of overstory hardwoods.

scholarly journals Timing of fire relative to seed development may enable non-serotinous species to recolonize from the aerial seed banks of fire-killed trees

2013 ◽  
Vol 10 (7) ◽  
pp. 5061-5078 ◽  
Author(s):  
S. T. Michaletz ◽  
E. A. Johnson ◽  
W. E. Mell ◽  
D. F. Greene
Keyword(s):  
Seed Development ◽  
Fire Behavior ◽  
White Spruce ◽  
Fire Regimes ◽  
Seed Banks ◽  
Conduction Model ◽  
Burned Areas ◽  
Area Burned ◽  
In Fire ◽  
Germinable Seed

Abstract. The existence of non-serotinous, non-sprouting species in fire regimes where serotiny confers an adaptive advantage is puzzling, particularly when these species recruit poorly from soil seed banks or from burn edges. In this paper, white spruce (Picea glauca (Moench) Voss) was used to show how the timing of fire relative to seed development may permit non-serotinous species to recolonize burned areas from the aerial seed banks of fire-killed trees. To estimate survival of seeds within closed cones during crown fires, cone heating was simulated using a one-dimensional conduction model implemented in a three-dimensional computational fluid dynamics fire behavior model. To quantify the area burned when germinable seed would be contained within closed cones during a mast year, empirical fire occurrence and seed development (germinability and cone opening) data were compared for multiple locations across the white spruce range. Approximately 12% of cones contained viable seed following crown fire simulations (0.072 m s−1 mean spread rate; 9147 kW m−1 mean intensity), and roughly half of the historical area burned resulted from fires that occurred when closed cones would contain germinable seed. Together, these results suggest that non-serotinous species may recolonize burned areas from in situ aerial seed banks, and that this may be an important cause of their existence in fire regimes to which they otherwise seem poorly suited.

scholarly journals FIRE BEHAVIOR PREDICTING MODELS EFFICIENCY IN BRAZILIAN COMMERCIAL EUCALYPT PLANTATIONS

CERNE ◽  
2016 ◽  
Vol 22 (4) ◽  
pp. 389-396 ◽  
Author(s):  
Benjamin Leonardo Alves White ◽  
Larissa Alves Secundo White ◽  
Genésio Tâmara Ribeiro ◽  
Rosemeri Melo Souza
Keyword(s):  
Fire Suppression ◽  
Fire Behavior ◽  
Fire Spread ◽  
Flame Length ◽  
Eucalypt Plantations ◽  
Spread Model ◽  
Experimental Laboratory ◽  
Predicted Values ◽  
In Fire ◽  
Better Than

ABSTRACT Knowing how a wildfire will behave is extremely important in order to assist in fire suppression and prevention operations. Since the 1940’s mathematical models to estimate how the fire will behave have been developed worldwide, however, none of them, until now, had their efficiency tested in Brazilian commercial eucalypt plantations nor in other vegetation types in the country. This study aims to verify the accuracy of the Rothermel (1972) fire spread model, the Byram (1959) flame length model, and the fire spread and length equations derived from the McArthur (1962) control burn meters. To meet these objectives, 105 experimental laboratory fires were done and their results compared with the predicted values from the models tested. The Rothermel and Byram models predicted better than McArthur’s, nevertheless, all of them underestimated the fire behavior aspects evaluated and were statistically different from the experimental data.

Elliptical-fire perimeter- and area-intensity distributions

1992 ◽  
Vol 22 (7) ◽  
pp. 968-972 ◽  
Author(s):  
E. A. Catchpole ◽  
M. E. Alexander ◽  
A. M. Gill
Keyword(s):  
Potential Application ◽  
Shape Factor ◽  
Fire Management ◽  
Fire Intensity ◽  
Spatial Distributions ◽  
Spread Rate ◽  
Ignition Point ◽  
Area Burned ◽  
Elliptical Shape

Equations are presented for determining the proportion of the total perimeter and area burned for a simple elliptically shaped fire for any specified range of Byram's fireline intensities. The same principles apply to any characteristic that is dependent on fireline intensity. Only three inputs are required: head-fire intensity; the elliptical shape factor; and the backfire spread rate. This last quantity is not required if it is assumed that the ignition point is at one focus of the ellipse. The spatial distributions produced have potential application to fire management.

Sign in / Sign up

Export Citation Format

Share Document