Grassland and forest understorey biomass emissions from prescribed fires in the south-eastern United States – RxCADRE 2012

2016 ◽  
Vol 25 (1) ◽  
pp. 102 ◽  
Author(s):  
Tara Strand ◽  
Brian Gullett ◽  
Shawn Urbanski ◽  
Susan O'Neill ◽  
Brian Potter ◽  
...  

Smoke measurements were made during grass and forest understorey prescribed fires as part of a comprehensive programme to understand fire and smoke behaviour. Instruments deployed on the ground, airplane and tethered aerostat platforms characterised the smoke plumes through measurements of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4) and particulate matter (PM), and measurements of optical properties. Distinctions were observed in aerial and ground-based measurements, with aerial measurements exhibiting smaller particle size distributions and PM emission factors, likely due to particle settling. Black carbon emission factors were similar for both burns and were highest during the initial flaming phase. On average, the particles from the forest fire were less light absorbing than those from the grass fires due to the longer duration of smouldering combustion in the forest biomass. CO and CH4 emission factors were over twice as high for the forest burn than for the grass burn, corresponding with a lower modified combustion efficiency and greater smouldering combustion. This dataset reveals the evolution of smoke emissions from two different commonly burned fuel types and demonstrates the complexity of emission factors.

2020 ◽  
Author(s):  
Patrick A. Barker ◽  
Grant Allen ◽  
Thomas Bannan ◽  
Archit Mehra ◽  
Keith N. Bower ◽  
...  

Abstract. Airborne sampling of methane (CH4), carbon dioxide (CO2), carbon monoxide (CO), and nitrous oxide (N2O) mole fractions was conducted during field campaigns targeting fires over Senegal in February and March 2017, and Uganda in January 2019. The majority of fire plumes sampled were close to, or directly over burning vegetation, with the exception of two longer-range flights over the West African Atlantic seaboard, (100–300 km from source) where the continental outflow of biomass burning emissions from a wider area of West Africa was sampled. Fire Emission Factors (EFs) and modified combustion efficiencies (MCEs) were estimated from the enhancements in measured mole fractions. For the Senegalese fires, mean EFs and corresponding one-standard deviation variabilities, in units of g per kg of dry fuel were 1.8 (± 0.06) for CH4, 1633 (± 56.4) for CO2 and 679 (± 1.6) for CO, with a mean MCE of 0.94 (± 0.005). For the Ugandan fires, mean EFs (in units of g kg−1) were 3.1 (± 0.1) for CH4, 1610 (± 54.9) for CO2 and 78 (± 1.9) for CO, with a mean modified combustion efficiency of 0.93 (± 0.004). A mean N2O EF of 0.08 (± 0.002) g kg−1 is also reported for one flight over Uganda; issues with temperature control of the instrument optical bench prevented N2O EFs from being obtained for other flights over Uganda. This study has provided new datasets of African biomass burning EFs and MCEs for two distinct study regions, in which both have been studied little by aircraft measurement previously. These results highlight the important intracontinental variability of biomass burning trace gas emissions, and can be used to better constrain future biomass burning emission budgets. More generally, these results highlight the importance of regional and fuel-type variability when attempting to spatially scale biomass burning emissions. Further work to constrain EFs at more local scales and for more specific (and quantifiable) fuel types will serve to improve global estimates of biomass burning emissions of climate-relevant gases.


2020 ◽  
Vol 20 (23) ◽  
pp. 15443-15459 ◽  
Author(s):  
Patrick A. Barker ◽  
Grant Allen ◽  
Martin Gallagher ◽  
Joseph R. Pitt ◽  
Rebecca E. Fisher ◽  
...  

Abstract. Airborne sampling of methane (CH4), carbon dioxide (CO2), carbon monoxide (CO), and nitrous oxide (N2O) mole fractions was conducted during field campaigns targeting fires over Senegal in February and March 2017 and Uganda in January 2019. The majority of fire plumes sampled were close to or directly over burning vegetation, with the exception of two longer-range flights over the West African Atlantic seaboard (100–300 km from source), where the continental outflow of biomass burning emissions from a wider area of West Africa was sampled. Fire emission factors (EFs) and modified combustion efficiencies (MCEs) were estimated from the enhancements in measured mole fractions. For the Senegalese fires, mean EFs and corresponding uncertainties in units of gram per kilogram of dry fuel were 1.8±0.19 for CH4, 1633±171.4 for CO2, and 67±7.4 for CO, with a mean MCE of 0.94±0.005. For the Ugandan fires, mean EFs were 3.1±0.35 for CH4, 1610±169.7 for CO2, and 78±8.9 for CO, with a mean modified combustion efficiency of 0.93±0.004. A mean N2O EF of 0.08±0.002 g kg−1 is also reported for one flight over Uganda; issues with temperature control of the instrument optical bench prevented N2O EFs from being obtained for other flights over Uganda. This study has provided new datasets of African biomass burning EFs and MCEs for two distinct study regions, in which both have been studied little by aircraft measurement previously. These results highlight the important intracontinental variability of biomass burning trace gas emissions and can be used to better constrain future biomass burning emission budgets. More generally, these results highlight the importance of regional and fuel-type variability when attempting to spatially scale biomass burning emissions. Further work to constrain EFs at more local scales and for more specific (and quantifiable) fuel types will serve to improve global estimates of biomass burning emissions of climate-relevant gases.


2018 ◽  
Vol 18 (5) ◽  
pp. 3717-3735 ◽  
Author(s):  
Elise-Andrée Guérette ◽  
Clare Paton-Walsh ◽  
Maximilien Desservettaz ◽  
Thomas E. L. Smith ◽  
Liubov Volkova ◽  
...  

Abstract. We characterised trace gas emissions from Australian temperate forest fires through a mixture of open-path Fourier transform infrared (OP-FTIR) measurements and selective ion flow tube mass spectrometry (SIFT-MS) and White cell FTIR analysis of grab samples. We report emission factors for a total of 25 trace gas species measured in smoke from nine prescribed fires. We find significant dependence on modified combustion efficiency (MCE) for some species, although regional differences indicate that the use of MCE as a proxy may be limited. We also find that the fire-integrated MCE values derived from our in situ on-the-ground open-path measurements are not significantly different from those reported for airborne measurements of smoke from fires in the same ecosystem. We then compare our average emission factors to those measured for temperate forest fires elsewhere (North America) and for fires in another dominant Australian ecosystem (savanna) and find significant differences in both cases. Indeed, we find that although the emission factors of some species agree within 20 %, including those of hydrogen cyanide, ethene, methanol, formaldehyde and 1,3-butadiene, others, such as acetic acid, ethanol, monoterpenes, ammonia, acetonitrile and pyrrole, differ by a factor of 2 or more. This indicates that the use of ecosystem-specific emission factors is warranted for applications involving emissions from Australian forest fires.


2017 ◽  
Vol 28 (2) ◽  
pp. 40 ◽  
Author(s):  
Tafadzwa Makonese ◽  
Daniel M. Masekameni ◽  
Harold J. Annegarn

Informal fixed-bed coal-burning braziers are used extensively in low-income communities of South Africa for space-heating and cooking needs. An investigation was carried out on the effects of coal moisture content and coal quality on the thermal and emissions performance of domestic coal-burning braziers in three field-procured braziers (with three different air ventilation rates), using the bottom-lit updraft (BLUD) and top-lit updraft (TLUD) ignition methods. Results showed that an increase in coal moisture content (from 2.4 wt.% to 8.6 wt.%) led to 18% and 30% decreases in fire-power when using the TLUD and BLUD methods, respectively. The combustion efficiency increased by 25% with an increase in moisture content. Measured carbon monoxide (CO) emission factors increased with an increase in moisture content, while carbon dioxide (CO2) emission factors remained unchanged. The use of A-grade coal resulted in a 49% increase in PM emissions compared with D-grade coal at high ventilation rates, despite no statistically significant differences (p > 0.05) in CO and CO2 emission factors produced between coal grades.


2017 ◽  
Author(s):  
Elise-Andrée Guérette ◽  
Clare Paton-Walsh ◽  
Maximilien Desservettaz ◽  
Thomas E. L. Smith ◽  
Liubov Volkova ◽  
...  

Abstract. We characterised trace gas emissions from Australian temperate forest fires through a mixture of in situ open-path FTIR measurements spectroscopy and selective ion flow tube mass spectrometry (SIFT-MS) and White cell FTIR spectroscopy of grab samples. We report emission factors for a total of 25 trace gas species measured in smoke from nine prescribed fires. We find significant dependence on modified combustion efficiency (MCE) for some species, although regional differences indicate that the use of MCE as a proxy may be limited. We also find that the fire-integrated MCE values derived from our in situ on-the-ground open-path measurements are not significantly different from those reported for airborne measurements of smoke from fires in the same ecosystem. We then compare our average emission factors to those measured for fires in North American temperate ecosystems and for fires in Australian savanna and find that, although emission factors of some species agree within 20 %, others differ by a factor of 2 or more. This indicates that the use of ecosystem-specific emission factors is warranted for applications involving emissions from Australian forest fires.


2011 ◽  
Vol 11 (2) ◽  
pp. 3529-3578 ◽  
Author(s):  
M. J. Wooster ◽  
P. H. Freeborn ◽  
S. Archibald ◽  
C. Oppenheimer ◽  
G. J. Roberts ◽  
...  

Abstract. Biomass burning emissions factors are vital to quantifying trace gases releases from vegetation fires. Here we evaluate emissions factors for a series of savannah fires in Kruger National Park (KNP), South Africa using ground-based open path Fourier transform infrared (FTIR) spectroscopy and an infrared lamp separated by 150–250 m distance. Molecular abundances along the extended open path are retrieved using a spectral forward model coupled to a non-linear least squares fitting approach. We demonstrate derivation of trace gas column amounts for horizontal paths transecting the width of the advected plume, and find, for example, that CO mixing ratio changes of ~0.001 μmol mol−1 (~10 ppbv) can be detected across the relatively long optical paths used here. We focus analysis on five key compounds whose production is preferential during the pyrolysis (CH2O), flaming (CO2) and smoldering (CO, CH4, NH3) fire phases. We demonstrate that well constrained emissions ratios for these gases to both CO2 and CO can be derived for the backfire, headfire and residual smouldering combustion stages of these savannah fires, from which stage-specific emission factors can then be calculated. Headfires and backfires in general show similar emission ratios and emission factors, but those of the residual smouldering combustion stage can differ substantially (e.g., ERCH4/CO2 up to ~7 times higher than for the flaming stages). The timing of each fire stage was identified via airborne optical and thermal IR imagery and ground-observer reports, with the airborne IR imagery also used to derive estimates of fire radiative energy, thus allowing the relative amount of fuel burned in each stage to be calculated and the "fire averaged" emission ratios and emission factors to be determined. The derived "fire averaged" emission ratios are dominated by the headfire contribution, since the vast majority of the fuel is burned in this stage. Our fire averaged emission ratios and factors for CO2 and CH4 agree with those from published studies conducted in the same area using airborne plume sampling, and we concur with past suggestions that emission factors for formaldehyde in this environment appear substantially underestimated in widely used databases. We also find the emission ratios and factors for CO and NH3 to be somewhat higher than most other estimates, however, we see no evidence to support suggestions of a major overestimation in the emission factor of ammonia. Our data also suggest that the contribution of burning animal (elephant) dung can be a significant factor in the emissions characteristics of certain KNP fires, and indicate some similarities between the time series of fire brightness temperature and modified combustion efficiency (MCE) that supports suggestions that EO-derived fire temperature estimates maybe useful when attempting to remotely classify fire activity into its different phases. We conclude that ground-based, extended open path FTIR spectroscopy is a practical and very effective means for determining emission ratios, emission factors and modified combustion efficiencies at open vegetation fire plumes, allowing these to be probed at temporal and spatial scales difficult to explore using other ground-based approaches. Though we limited our study to five key emissions products, open path FTIR spectroscopy can detect dozens of other species, as has been demonstrated during previous closed-path FTIR airborne deployments in the same study area.


1991 ◽  
Vol 1 (3) ◽  
pp. 153 ◽  
Author(s):  
DR Weise ◽  
DE Ward ◽  
TE Paysen ◽  
AL Koonce

Prescribed fire is a tool used to manage vegetation in southern California. The nature and quan tity of gaseous and particulate emissions have not been described for California chaparral. A study examining carbon monoxide (CO), carbon dioxide (CO2), and par ticulate matter emissions from fuel beds constructed from common chaparral shrubs was initiated. Chamise (Adenostoma fasciculatum), ceanothus (Ceanothus crassifolius), manzanita (Arctostaphylos glandulosa), and scrub oak (Quercus dumosa) fuel beds were burned in December 1989, and March, May, and August, 1990. Gas and particulate matter samples were collected from 45 fires. Emission factors for CO2 and particulate matter were affected by species and month individually; month and species interacted and affected CO emission factors. Pearson's correlation coefficient and Kendall's tau indi cated that emission factors for CO and particulate matter were inversely related to combustion efficiency.


2020 ◽  
Vol 20 (20) ◽  
pp. 12033-12045
Author(s):  
Haeyoung Lee ◽  
Edward J. Dlugokencky ◽  
Jocelyn C. Turnbull ◽  
Sepyo Lee ◽  
Scott J. Lehman ◽  
...  

Abstract. To understand the Korean Peninsula's carbon dioxide (CO2) emissions and sinks as well as those of the surrounding region, we used 70 flask-air samples collected during May 2014 to August 2016 at Anmyeondo (AMY; 36.53∘ N, 126.32∘ E; 46 m a.s.l.) World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) station, located on the west coast of South Korea, for analysis of observed 14C in atmospheric CO2 as a tracer of fossil fuel CO2 contribution (Cff). Observed 14C ∕ C ratios in CO2 (reported as Δ values) at AMY varied from −59.5 ‰ to 23.1 ‰, with a measurement uncertainty of ±1.8 ‰. The derived mean value Cff of (9.7±7.8) µmol mol−1 (1σ) is greater than that found in earlier observations from Tae-Ahn Peninsula (TAP; 36.73∘ N, 126.13∘ E; 20 m a.s.l., 28 km away from AMY) of (4.4±5.7) µmol mol−1 from 2004 to 2010. The enhancement above background mole fractions of sulfur hexafluoride (Δx(SF6)) and carbon monoxide (Δx(CO)) correlate strongly with Cff (r>0.7) and appear to be good proxies for fossil fuel CO2 at regional and continental scales. Samples originating from the Asian continent had greater Δx(CO) : Cff(RCO) values, (29±8) to (36±2) nmol µmol−1, than in Korean Peninsula local air ((8±2) nmol µmol−1). Air masses originating in China showed (1.6±0.4) to (2.0±0.1) times greater RCO than a bottom-up inventory, suggesting that China's CO emissions are underestimated in the inventory, while observed RSF6 values are 2–3 times greater than inventories for both China and South Korea. However, RCO values derived from both inventories and observations have decreased relative to previous studies, indicating that combustion efficiency is increasing in both China and South Korea.


Sign in / Sign up

Export Citation Format

Share Document