The uptake of nitrogen from soils in relation to solute diffusion

Soil Research ◽  
1968 ◽  
Vol 6 (1) ◽  
pp. 75 ◽  
Author(s):  
AL Clarke ◽  
KP Barley
Keyword(s):  
Thin Layer ◽  
Nitrogen Uptake ◽  
Nitrate Uptake ◽  
Nitrate Nitrogen ◽  
Solution Concentration ◽  
The Other ◽  
Solute Diffusion ◽  
Wheat Roots ◽  
Wide Range ◽  
Order Of Magnitude

When either a sand or a loam was wetted with solutions of given concentration, the apparent diffusivities of nitrate, KNO3, and ammonium, KNH3, increased with the volume of solution added. Values of KNO3 (0.5-5 x 10-3 cm2/sec) were similar to those reported previously for KCl, and were one order of magnitude higher than the values for KNH4 (0.4-3 x 10-7 cm2/sec). The rate at which wheat roots depleted the sand and loam of nitrate or ammonium was measured by two methods. In one method root mats were used, and in the other single roots were grown through a thin layer of soil. In both methods the flow of water to the roots was minimized. The uptake of nitrogen followed a very different pattern from that reported for stirred solutions. Nitrate uptake increased linearly with soil solution concentration over a wide range, 100-1000 p.p.m. of nitrate nitrogen. Also, although ammonium is generally absorbed more rapidly than nitrate from stirred solutions, nitrate was absorbed far more rapidly than ammonium when equivalent amounts were added to the soil. The observed variations in nitrogen uptake could be largely attributed to changes in the resistance that the soil offered to the diffusion of solutes.

scholarly journals New Algorithms for Bidirectional Singleton Arc Consistency

2013 ◽  
Vol 2013 ◽  
pp. 1-10
Author(s):  
Yonggang Zhang ◽  
Qian Yin ◽  
Xingjun Zhu ◽  
Zhanshan Li ◽  
Sibo Zhang ◽  
...  
Keyword(s):  
Time Complexity ◽  
The Other ◽  
Worst Case ◽  
Space And Time ◽  
Arc Consistency ◽  
Wide Range ◽  
Order Of Magnitude ◽  
Special Circumstances ◽  
New Algorithms

Bidirectional singleton arc consistency (BiSAC) which is an extended singleton arc consistency (SAC) has been proposed recently. The first contribution of this paper is to propose and prove two theorems of BiSAC theoretically (one is a property of BiSAC and the other is the property of allowing the deletion of some BiSAC-inconsistent values). Secondly, based on these properties we present two algorithms, denoted by BiSAC-DF and BiSAC-DP, to enforce BiSAC. Also, we prove their correctness and analyze the space and time complexity of them in detail. Besides, for special circumstances, we show that BiSAC-DF admits a worst-case time complexity inO(en2d4)and a best one inO(en2d3)when the problem is an already BiSAC, while BiSAC-DP also has the same best one when the tightness is small. Finally, experiments on a wide range of CSP instances show BiSAC-DF and BiSAC-DP are usually around one order of magnitude faster than the existing BiSAC-1. For some special instances, BiSAC-DP is about two orders of magnitude efficient.

Asymmetrically Plate-Reinforced Circular Hole in a Uniformly End-Loaded Flat Plate

1959 ◽  
Vol 10 (2) ◽  
pp. 183-198 ◽  
Author(s):  
Raymond Hicks
Keyword(s):  
Flat Plate ◽  
Circular Hole ◽  
Annular Plate ◽  
The Other ◽  
Stress Distributions ◽  
Stress Concentrations ◽  
Principal Stresses ◽  
Wide Range ◽  
Bending Stresses ◽  
Order Of Magnitude

SummaryGeneral expressions are obtained for the stress distribution in a flat plate end-loaded by equal principal stresses and containing a circular hole reinforced by an annular plate. The reinforcement is placed on one side of the plate only so that the other side remains flush. It is shown that the effect of an asymmetrically placed reinforcement is to induce, in the plate and rein-forcement, bending stresses which are not negligible compared with the externally applied direct stress. From particular examples it is found that reinforcements having practical dimensions can give rise to stress concentrations in the same order of magnitude as those in a similarly loaded plate containing an unreinforced hole. For practical purposes, data have been obtained which enable the designer to determine quickly the stress distributions associated with reinforcements and plates having a reasonably wide range of dimensions.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

Development of a method for multielemental determination in water by EDXRF with radioisotopic source of 238Pu.

2019 ◽  
Vol 7 (2A) ◽  
Author(s):  
Camilo Fuentes Serrano ◽  
Juan Reinaldo Estevez Alvares ◽  
Alfredo Montero Alvarez ◽  
Ivan Pupo Gonzales ◽  
Zahily Herrero Fernandez ◽  
...  
Keyword(s):  
Thin Layer ◽  
Expanded Uncertainty ◽  
Considerable Decrease ◽  
X Ray ◽  
Precipitation Efficiency ◽  
Method Of Determination ◽  
Sensitivity Curves ◽  
Order Of Magnitude ◽  
Metrological Parameters

A method for determination of Cr, Fe, Co, Ni, Cu, Zn, Hg and Pb in waters by Energy Dispersive X Ray Fluorescence (EDXRF) was implemented, using a radioisotopic source of 238Pu. For previous concentration was employed a procedure including a coprecipitation step with ammonium pyrrolidinedithiocarbamate (APDC) as quelant agent, the separation of the phases by filtration, the measurement of filter by EDXRF and quantification by a thin layer absolute method. Sensitivity curves for K and L lines were obtained respectively. The sensitivity for most elements was greater by an order of magnitude in the case of measurement with a source of 238Pu instead of 109Cd, which means a considerable decrease in measurement times. The influence of the concentration in the precipitation efficiency was evaluated for each element. In all cases the recoveries are close to 100%, for this reason it can be affirmed that the method of determination of the studied elements is quantitative. Metrological parameters of the method such as trueness, precision, detection limit and uncertainty were calculated. A procedure to calculate the uncertainty of the method was elaborated; the most significant source of uncertainty for the thin layer EDXRF method is associated with the determination of instrumental sensitivities. The error associated with the determination, expressed as expanded uncertainty (in %), varied from 15.4% for low element concentrations (2.5-5 μg/L) to 5.4% for the higher concentration range (20-25 μg/L).

p-Sulfonic acid calix[n]arene catalyzed synthesis of bioactive heterocycles: A review

2020 ◽  
Vol 24 ◽  
Author(s):  
Bubun Banerjee ◽  
Gurpreet Kaur ◽  
Navdeep Kaur
Keyword(s):  
Supramolecular Chemistry ◽  
Sulfonic Acid ◽  
Catalytic Efficiency ◽  
The Other ◽  
Reaction Conditions ◽  
Metal Free ◽  
Bioactive Scaffolds ◽  
Wide Range ◽  
Efficient Alternative ◽  
Bioactive Heterocycles

: Metal-free organocatalysts are becoming an important tool for the sustainable developments of various bioactive heterocycles. On the other hand, during last two decades, calix[n]arenes have been gaining considerable attention due to their wide range of applicability in the field of supramolecular chemistry. Recently, sulfonic acid functionalized calix[n] arenes are being employed as an efficient alternative catalyst for the synthesis of various bioactive scaffolds. In this review we have summarized the catalytic efficiency of p-sulfonic acid calix[n]arenes for the synthesis of diverse biologically promising scaffolds under various reaction conditions. There is no such review available in the literature showing the catalytic applicability of p-sulfonic acid calix[n]arenes. Therefore, we strongly believe that this review will surely attract those researchers who are interested about this fascinating organocatalyst.

Phytochemical, Analytical and Medicinal Studies of Holoptelea integrifolia Roxb. Planch - A Review

2019 ◽  
Vol 5 (4) ◽  
pp. 270-277 ◽  
Author(s):  
Vijay Kumar ◽  
Simranjeet Singh ◽  
Ragini Bhadouria ◽  
Ravindra Singh ◽  
Om Prakash
Keyword(s):  
Liquid Chromatography ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
High Performance ◽  
Biologically Active ◽  
Toxicological Studies ◽  
Wide Range ◽  
Layer Chromatography

Holoptelea integrifolia Roxb. Planch (HI) has been used to treat various ailments including obesity, osteoarthritis, arthritis, inflammation, anemia, diabetes etc. To review the major phytochemicals and medicinal properties of HI, exhaustive bibliographic research was designed by means of various scientific search engines and databases. Only 12 phytochemicals have been reported including biologically active compounds like betulin, betulinic acid, epifriedlin, octacosanol, Friedlin, Holoptelin-A and Holoptelin-B. Analytical methods including the Thin Layer Chromatography (TLC), High-Performance Thin Layer Chromatography (HPTLC), High-Performance Liquid Chromatography (HPLC) and Liquid Chromatography With Mass Spectral (LC-MS) analysis have been used to analyze the HI. From medicinal potency point of view, these phytochemicals have a wide range of pharmacological activities such as antioxidant, antibacterial, anti-inflammatory, and anti-tumor. In the current review, it has been noticed that the mechanism of action of HI with biomolecules has not been fully explored. Pharmacology and toxicological studies are very few. This seems a huge literature gap to be fulfilled through the detailed in-vivo and in-vitro studies.

Comparison of the Potency of 8-L-Arginine, 8-D-Arginine and 8-D-Homoarginine Vasopressin Analogs with Substituted Phenylalanine in Position 2

1994 ◽  
Vol 59 (6) ◽  
pp. 1439-1450 ◽  
Author(s):  
Miroslava Žertová ◽  
Jiřina Slaninová ◽  
Zdenko Procházka
Keyword(s):  
Amino Acid ◽  
Solid Phase Synthesis ◽  
Solid Phase ◽  
Basic Amino Acid ◽  
The Other ◽  
Side Chain ◽  
Inhibitory Potency ◽  
Phase Synthesis ◽  
Other Hand ◽  
Order Of Magnitude

An analysis of the uterotonic potencies of all analogs having substituted L- or D-tyrosine or -phenylalanine in position 2 and L-arginine, D-arginine or D-homoarginine in position 8 was made. The series of analogs already published was completed by the solid phase synthesis of ten new analogs having L- or D-Phe, L- or D-Phe(2-Et), L- or D-Phe(2,4,6-triMe) or D-Tyr(Me) in position 2 and either L- or D-arginine in position 8. All newly synthesized analogs were found to be uterotonic inhibitors. Deamination increases both the agonistic and antagonistic potency. In the case of phenylalanine analogs the change of configuration from L to D in position 2 enhances the uterotonic inhibition for more than 1 order of magnitude. The L to D change in position 8 enhances the inhibitory potency negligibly. Prolongation of the side chain of the D-basic amino acid in position 8 seems to decrease slightly the inhibitory potency if there is L-substituted amino acid in position 2. On the other hand there is a tendency to the increase of the inhibitory potency if there is D-substituted amino acid in position 2.

scholarly journals Density Guarantee on Finding Multiple Subgraphs and Subtensors

2021 ◽  
Vol 15 (5) ◽  
pp. 1-32
Author(s):  
Quang-huy Duong ◽  
Heri Ramampiaro ◽  
Kjetil Nørvåg ◽  
Thu-lan Dam
Keyword(s):  
Lower Bound ◽  
State Of The Art ◽  
The State ◽  
The Other ◽  
Exact Methods ◽  
Practical Solution ◽  
Novel Approach ◽  
Wide Range ◽  
Real World Datasets ◽  
Tensor Data

Dense subregion (subgraph & subtensor) detection is a well-studied area, with a wide range of applications, and numerous efficient approaches and algorithms have been proposed. Approximation approaches are commonly used for detecting dense subregions due to the complexity of the exact methods. Existing algorithms are generally efficient for dense subtensor and subgraph detection, and can perform well in many applications. However, most of the existing works utilize the state-or-the-art greedy 2-approximation algorithm to capably provide solutions with a loose theoretical density guarantee. The main drawback of most of these algorithms is that they can estimate only one subtensor, or subgraph, at a time, with a low guarantee on its density. While some methods can, on the other hand, estimate multiple subtensors, they can give a guarantee on the density with respect to the input tensor for the first estimated subsensor only. We address these drawbacks by providing both theoretical and practical solution for estimating multiple dense subtensors in tensor data and giving a higher lower bound of the density. In particular, we guarantee and prove a higher bound of the lower-bound density of the estimated subgraph and subtensors. We also propose a novel approach to show that there are multiple dense subtensors with a guarantee on its density that is greater than the lower bound used in the state-of-the-art algorithms. We evaluate our approach with extensive experiments on several real-world datasets, which demonstrates its efficiency and feasibility.

scholarly journals Grasp to See—Object Classification Using Flexion Glove with Support Vector Machine

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1461
Author(s):  
Shun-Hsin Yu ◽  
Jen-Shuo Chang ◽  
Chia-Hung Dylan Tsai
Keyword(s):  
Support Vector Machine ◽  
Daily Life ◽  
Object Classification ◽  
Target Object ◽  
The Other ◽  
Support Vector ◽  
Wide Range ◽  
Dark Space ◽  
Flex Sensors ◽  
Shape And Size

This paper proposes an object classification method using a flexion glove and machine learning. The classification is performed based on the information obtained from a single grasp on a target object. The flexion glove is developed with five flex sensors mounted on five finger sleeves, and is used for measuring the flexion of individual fingers while grasping an object. Flexion signals are divided into three phases, and they are the phases of picking, holding and releasing, respectively. Grasping features are extracted from the phase of holding for training the support vector machine. Two sets of objects are prepared for the classification test. One is printed-object set and the other is daily-life object set. The printed-object set is for investigating the patterns of grasping with specified shape and size, while the daily-life object set includes nine objects randomly chosen from daily life for demonstrating that the proposed method can be used to identify a wide range of objects. According to the results, the accuracy of the classifications are achieved 95.56% and 88.89% for the sets of printed objects and daily-life objects, respectively. A flexion glove which can perform object classification is successfully developed in this work and is aimed at potential grasp-to-see applications, such as visual impairment aid and recognition in dark space.

scholarly journals Soil Nitrogen Dynamics in a Managed Temperate Grassland Under Changed Climatic Conditions

Water ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 931
Author(s):  
Mona Giraud ◽  
Jannis Groh ◽  
Horst H. Gerke ◽  
Nicolas Brüggemann ◽  
Harry Vereecken ◽  
...  
Keyword(s):  
Nitrogen Uptake ◽  
Inorganic Nitrogen ◽  
Nitrogen Concentration ◽  
Nitrogen Dynamics ◽  
Climatic Conditions ◽  
Undisturbed Soil ◽  
Nitrogen Emissions ◽  
Growing Period ◽  
Grassland Type ◽  
Wide Range

Grasslands are one of the most common biomes in the world with a wide range of ecosystem services. Nevertheless, quantitative data on the change in nitrogen dynamics in extensively managed temperate grasslands caused by a shift from energy- to water-limited climatic conditions have not yet been reported. In this study, we experimentally studied this shift by translocating undisturbed soil monoliths from an energy-limited site (Rollesbroich) to a water-limited site (Selhausen). The soil monoliths were contained in weighable lysimeters and monitored for their water and nitrogen balance in the period between 2012 and 2018. At the water-limited site (Selhausen), annual plant nitrogen uptake decreased due to water stress compared to the energy-limited site (Rollesbroich), while nitrogen uptake was higher at the beginning of the growing period. Possibly because of this lower plant uptake, the lysimeters at the water-limited site showed an increased inorganic nitrogen concentration in the soil solution, indicating a higher net mineralization rate. The N2O gas emissions and nitrogen leaching remained low at both sites. Our findings suggest that in the short term, fertilizer should consequently be applied early in the growing period to increase nitrogen uptake and decrease nitrogen losses. Moreover, a shift from energy-limited to water-limited conditions will have a limited effect on gaseous nitrogen emissions and nitrate concentrations in the groundwater in the grassland type of this study because higher nitrogen concentrations are (over-) compensated by lower leaching rates.

Sign in / Sign up

Export Citation Format

Share Document