Simplified power law relationship in the estimation of hydraulic conductivity of unsaturated sands using electrical conductivity

Soil Research ◽  
2021 ◽  
Author(s):  
Ching-Yi Liu ◽  
Yun-Da Hsieh ◽  
Yung-Chia Chiu
Keyword(s):  
Electrical Conductivity ◽  
Hydraulic Conductivity ◽  
Power Law ◽  
Unsaturated Sands

Simplified estimation of unsaturated soil hydraulic conductivity using bulk electrical conductivity and particle size distribution

Soil Research ◽  
2013 ◽  
Vol 51 (1) ◽  
pp. 23 ◽  
Author(s):  
Mohammad Reza Neyshabouri ◽  
Mehdi Rahmati ◽  
Claude Doussan ◽  
Boshra Behroozinezhad
Keyword(s):  
Electrical Conductivity ◽  
Particle Size ◽  
Hydraulic Conductivity ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Unsaturated Soil ◽  
Soil Core ◽  
Soil Hydraulic Conductivity ◽  
Core Samples ◽  
Soil Hydraulic

Unsaturated soil hydraulic conductivity K is a fundamental transfer property of soil but its measurement is costly, difficult, and time-consuming due to its large variations with water content (θ) or matric potential (h). Recently, C. Doussan and S. Ruy proposed a method/model using measurements of the electrical conductivity of soil core samples to predict K(h). This method requires the measurement or the setting of a range of matric potentials h in the core samples—a possible lengthy process requiring specialised devices. To avoid h estimation, we propose to simplify that method by introducing the particle-size distribution (PSD) of the soil as a proxy for soil pore diameters and matric potentials, with the Arya and Paris (AP) model. Tests of this simplified model (SM) with laboratory data on a broad range of soils and using the AP model with available, previously defined parameters showed that the accuracy was lower for the SM than for the original model (DR) in predicting K (RMSE of logK = 1.10 for SM v. 0.30 for DR; K in m s–1). However, accuracy was increased for SM when considering coarse- and medium-textured soils only (RMSE of logK = 0.61 for SM v. 0.26 for DR). Further tests with 51 soils from the UNSODA database and our own measurements, with estimated electrical properties, confirmed good agreement of the SM for coarse–medium-textured soils (<35–40% clay). For these textures, the SM also performed well compared with the van Genuchten–Mualem model. Error analysis of SM results and fitting of the AP parameter showed that most of the error for fine-textured soils came from poorer adequacy of the AP model’s previously defined parameters for defining the water retention curve, whereas this was much less so for coarse-textured soils. The SM, using readily accessible soil data, could be a relatively straightforward way to estimate, in situ or in the laboratory, K(h) for coarse–medium-textured soils. This requires, however, a prior check of the predictive efficacy of the AP model for the specific soil investigated, in particular for fine-textured/structured soils and when using previously defined AP parameters.

The ability of Distichlis spicata to grow sustainably within a saline discharge zone while improving the soil chemical and physical properties

Soil Research ◽  
2008 ◽  
Vol 46 (1) ◽  
pp. 37 ◽  
Author(s):  
M. R. Sargeant ◽  
C. Tang ◽  
P. W. G. Sale
Keyword(s):  
Electrical Conductivity ◽  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Soil Nitrogen ◽  
Fold Increase ◽  
Dry Weight ◽  
Saturated Hydraulic Conductivity ◽  
Distichlis Spicata ◽  
Discharge Zone ◽  
Spatial And Temporal Variation

Landholder observations indicate that the growth of Distichlis spicata in saline discharge sites improves the soil condition. An extensive soil sampling survey was conducted at the Wickepin field site in Western Australia, where D. spicata had been growing for 8 years, to test the hypothesis that this halophytic grass will make improvements in chemical and physical properties of the soil. Soil measurements included saturated hydraulic conductivity, water-stable aggregates, root length and dry weight, electrical conductivity, pH, and soil nitrogen and carbon. Results confirm that marked differences in soil properties occurred under D. spicata. For example, a 12-fold increase in saturated hydraulic conductivity occurred where D. spicata had been growing for 8 years, compared to adjacent control soil where no grass had been growing. There were also improvements in aggregate stability, with the most notable improvements in the top 0.10 m of soil, again with the greatest improvements occurring where 8 years of growth had occurred. Soil nitrogen and carbon increased under the sward, with the biggest increases occurring in the top 0.10 m of soil. Electrical conductivity measurements were more variable, mostly due to the large spatial and temporal variation encountered. However, the findings generally support the proposition that the growth of D. spicata does not lead to an accumulation of salt within the rooting zone.

Amelioration of sodic soils with blue-green algae

Soil Research ◽  
1981 ◽  
Vol 19 (3) ◽  
pp. 361 ◽  
Author(s):  
D Subhashini ◽  
BD Kaushik
Keyword(s):  
Electrical Conductivity ◽  
Hydraulic Conductivity ◽  
Nitrogen Content ◽  
Total Nitrogen ◽  
Algal Growth ◽  
Algal Flora ◽  
Exchangeable Sodium ◽  
Sodic Soils ◽  
Blue Green Algae ◽  
Biological Input

Algal growth resulted in significant reductions in pH, electrical conductivity, exchangeable sodium and in hydraulic conductivity and aggregation status of the soil. There was a significant increase in the total nitrogen content of the soil due to algal growth. Two out of the three inoculated species of algae could establish in the pots along with the indigenous algal flora. Combination of gypsum and algal application were found to have appreciable reclamative properties, and the possibility of using algae as a biological input for the reclamation of sodic soils has been indicated.

scholarly journals Relationship between Hydraulic Conductivity and Electrical Conductivity in Sands

2015 ◽  
Vol 31 (6) ◽  
pp. 45-58
Author(s):  
Jinwook Kim ◽  
Hyunwook Choo ◽  
Changho Lee ◽  
Woojin Lee
Keyword(s):  
Electrical Conductivity ◽  
Hydraulic Conductivity

scholarly journals Salinity Status of Lajas Valley Soils

1969 ◽  
Vol 41 (1) ◽  
pp. 25-34
Author(s):  
Juan A. Bonnet ◽  
Eduardo J. Brenes
Keyword(s):  
Electrical Conductivity ◽  
Hydraulic Conductivity ◽  
Soil Layer ◽  
Soil Surface ◽  
Exchangeable Sodium Percentage ◽  
Exchangeable Sodium ◽  
Surface Layers ◽  
Alkali Soils ◽  
The World ◽  
Sodium Percentage

1. The area of soils surveyed in Lajas Valley was 24,656 acres. 2. The soils were classified into normal, saline, saline-alkali, and non- saline-alkali at depths of 0 to 8, 8 to 24, 24 to 48, and 48 to 72 inches, respectively. 3. A large percentage of normal soils was found in the upper soil layer and of saline-alkali soils in the lower layers. 4. Normal soils occupied about 86 percent of the surface area to a depth of 8 inches and about 63 percent at a depth of 8 to 24 inches. 5. Soils with a salinity problem increased from 9 percent at a depth of 8 inches to 28.3, 58.8 and 68.5 percent, respectively, at depths of 8 to 24, 24 to 48, and 48 to 72 inches. 6. The soils with a salinity problem were largely of the saline-alkali class. 7. In four soil-profile samples taken from Lajas Valley, the saturation percentage varied from 58 to 191, the electrical conductivity from 0.8 to 28.4 millimhos per centimeter, the exchangeable-sodium percentage from 2.2 to 46.0, the soil pH from 8.1 to 8.9, the content of gypsum from 0 to 21.9 tons per acre-foot, the gypsum requirement from 0 to 23.8 tons per acre-foot, and the hydraulic conductivity from less than 0.005 to 6.24 inches of water per hour. Higher gypsum contents were found in the deep subsoil layers of two soils (profiles 1 and 4). Amounts of gypsum varying from 9.9 to 20.3 tons per acre-foot of depth, are required for the reclamation of the surface layers of these two profiles. In general, the hydraulic- conductivity values show that the soil-surface layers are more permeable than the subsoil layers. 8. The procedure and methods used in this paper were found to be accurate, simple, rapid, and practical. They are recommended for the coordination of data related to the classification and reclamation of soils affected by salinity problems in the different countries of the world.

scholarly journals Technical note: A two-sided affine power scaling relationship to represent the concentration–discharge relationship

2020 ◽  
Vol 24 (4) ◽  
pp. 1823-1830 ◽  
Author(s):  
José Manuel Tunqui Neira ◽  
Vazken Andréassian ◽  
Gaëlle Tallec ◽  
Jean-Marie Mouchel
Keyword(s):  
Electrical Conductivity ◽  
Time Series ◽  
Power Law ◽  
High Frequency ◽  
Technical Note ◽  
Mathematical Representation ◽  
Power Scaling ◽  
Calibration And Validation ◽  
Numerical Criterion ◽  
Scaling Relationship

Abstract. This technical note deals with the mathematical representation of concentration–discharge relationships. We propose a two-sided affine power scaling relationship (2S-APS) as an alternative to the classic one-sided power scaling relationship (commonly known as “power law”). We also discuss the identification of the parameters of the proposed relationship, using an appropriate numerical criterion. The application of 2S-APS to the high-frequency chemical time series of the Orgeval-ORACLE observatory is presented here (in calibration and validation mode): it yields better results for several solutes and for electrical conductivity in comparison with the power law relationship.

Sign in / Sign up

Export Citation Format

Share Document