Using geomorphology to assess contour furrowing in western New South Wales, Australia

2011 ◽  
Vol 33 (2) ◽  
pp. 153 ◽  
Author(s):  
Gresley Wakelin-King

This study examines landscape rehabilitation treatments installed 20–40 years ago in the Western Catchment of NSW. Treatment outcomes were assessed using geomorphic criteria, because geomorphic processes are fundamental to ecological permanence. Contour furrowing creates artificial runoff-runon sets which intercept runoff (resistance to flow by windrows microrelief and surface roughness) and promote infiltration (artificial permeability by ripping). As originally conceived, after windrows subside, flow resistance would be afforded by surface roughness under belts of vegetation. This study shows that rehabilitation treatments have a more complex relationship with the landscape than this would suggest, and that the final effect of the treatment depends on the geomorphic processes natural to the site. Treatment design should therefore be site-specific. The relevant aspects of treatment design are site location, runoff : runon ratio (expressed as furrow spacing and furrow length), furrow placement, and post-treatment management. Some long-term successes are documented. In ironstone ridge country affected by impermeable hard-setting soils, furrowing creates artificial permeability, allowing plant germination; plant material in the soil reverses hard-setting and establishes self-sustaining permeability. In stony gilgai country furrowing through vegetated patches can aid in re-establishing vegetation, but furrowing through stony runoff patches only diminishes, rather than improves, landscape function. Other landscape types will have different key attributes. In all cases, selection of appropriate sites for rehabilitation treatment is of primary importance. The 1990s NSW Soil Conservation Service best-practice included a specialised furrower, surveying techniques for accurate furrow placement along the contour, staggered gaps along each furrow line to reduce risks of gullying by windrow breakthrough, and post-treatment management of total grazing pressure. New guidelines for treatment design developed from this study include determining for each site the optimum runoff:runon ratio (which varies according to climate, gradient, vegetation, and regolith), and matching furrow spacing and furrow/gap length to local runoff:runon ratios. In stony gilgai country, furrow placement should be along the contour but within non-stony patches; elsewhere, placement should be rigorously along the contour. In ironstone ridge country, a greater runoff:runon ratio, commensurate with the area’s apparently larger patch scale, can be achieved by having more gap than furrow along each furrow line. No single rehabilitation technique will fit all landscape types, and these guidelines will ideally be developed further with investigation of other landscapes.

Geoheritage ◽  
2021 ◽  
Vol 13 (2) ◽  
Author(s):  
Roger Crofts ◽  
Dan Tormey ◽  
John E. Gordon

AbstractThis paper introduces newly published guidelines on geoheritage conservation in protected and conserved areas within the “IUCN WCPA Best Practice Guidelines” series. It explains the need for the guidelines and outlines the ethical basis of geoheritage values and geoconservation principles as the fundamental framework within which to advance geoheritage conservation. Best practice in establishing and managing protected and conserved areas for geoconservation is described with examples from around the world. Particular emphasis is given to the methodology and practice for dealing with the many threats to geoheritage, highlighting in particular how to improve practice for areas with caves and karst, glacial and periglacial, and volcanic features and processes, and for palaeontology and mineral sites. Guidance to improve education and communication to the public through modern and conventional means is also highlighted as a key stage in delivering effective geoconservation. A request is made to geoconservation experts to continue to share best practice examples of developing methodologies and best practice in management to guide non-experts in their work. Finally, a number of suggestions are made on how geoconservation can be further promoted.


2019 ◽  
Vol 3 (4) ◽  
pp. 88
Author(s):  
Tillmann ◽  
Stangier ◽  
Lopes Dias ◽  
Gelinski ◽  
Stanko ◽  
...  

In injection molding, the reduction of ejection forces is a process relevant aspect to improve the production rates. For this purpose, CrN and CrAlN films were sputtered on cylindrical and quadratic AISI H11 cores of an injection mold in order to investigate their influence on the resulting ejection forces to demold polypropylene test components. Within this context, the ejection forces of the PVD coated cores were compared to those of uncoated cores made of AISI H11. For both the cylindrical and quadratic cores, the as-deposited CrN and CrAlN films exhibit higher ejection forces than the uncoated cores due to the increase of the roughness profile after sputtering. It is known that the ejection forces are directly related to the surface roughness. In order to ensure comparable surface conditions to the uncoated surfaces, and to demonstrate the potential of PVD coated mold surfaces when reducing the ejection forces, the coated surfaces were mechanically post-treated to obtain a similar roughness profile as the uncoated cores. The combination of a PVD deposition and post-treatment ensures a significant reduction of the ejection forces by 22.6% and 23.7% for both core geometries.


2021 ◽  
Vol 11 (24) ◽  
pp. 11824
Author(s):  
Seung-Yeop Chun ◽  
Geumyeon Lee ◽  
Su-jin Kim ◽  
Bora Jeong ◽  
Jeehoon Shin ◽  
...  

Powder bed 3D printing can be applied to sandcasting mold manufacturing to ensure high quality and economy through process innovation. In this study, refractory alumina cement was used as an aqueous binder to ensure high-temperature thermal stability to minimize the addition of organic matter to reduce gas generation. In addition, spherical silica sand, the study material, was selected to a size of 30 µm to improve the casting mold resolution. To improve the surface quality through the post-treatment process, we confirmed the change in the surface roughness of the mold depending on the surface treatment of colloidal silica and the presence or absence of heat treatment, and finally made the mold through actual casting. Changes in the surface roughness and flowability of the cast body after mold post-treatment were confirmed. For aluminum castings, the shrinkage rate and surface roughness were confirmed in a box-shaped mold via gravity casting, and the flowability of the molten metal in the mold was confirmed in a hand-shaped mold. There was a change in the roughness and porosity of the mold, owing to the post-treatment, and the influence of the surface roughness and flowability of the cast body during actual casting was confirmed.


2018 ◽  
Vol 39 (1_suppl) ◽  
pp. 68S-73S ◽  
Author(s):  
Pim A. D. van Dijk ◽  
Christopher D. Murawski ◽  
Kenneth J. Hunt ◽  
Carol L. Andrews ◽  
Umile Giuseppe Longo ◽  
...  

Background: The evidence supporting best practice guidelines in the field of cartilage repair of the ankle are based on both low quality and low levels of evidence. Therefore, an international consensus group of experts was convened to collaboratively advance toward consensus opinions based on the best available evidence on key topics within cartilage repair of the ankle. The purpose of this article is to report the consensus statements on Post-treatment Follow-up, Imaging and Outcome Scores developed at the 2017 International Consensus Meeting on Cartilage Repair of the Ankle. Methods: Seventy-five international experts in cartilage repair of the ankle representing 25 countries and 1 territory were convened and participated in a process based on the Delphi method of achieving consensus. Questions and statements were drafted within 11 working groups focusing on specific topics within cartilage repair of the ankle, after which a comprehensive literature review was performed and the available evidence for each statement was graded. Discussion and debate occurred in cases where statements were not agreed on in unanimous fashion within the working groups. A final vote was then held, and the strength of consensus was characterized as follows: consensus, 51% to 74%; strong consensus, 75% to 99%; unanimous, 100%. Results: A total of 12 statements on Post-treatment Follow-up, Imaging, and Outcome Scores reached consensus during the 2017 International Consensus Meeting on Cartilage Repair of the Ankle. All 12 statements reached strong consensus (greater than 75% agreement). Conclusions: This international consensus derived from leaders in the field will assist clinicians with post-treatment follow-up, imaging, and outcome scores after management of a cartilage injury of the ankle in the general population. Moreover, healing, rehabilitation, and final outcomes can be optimized for the individual patient.


1995 ◽  
Vol 222 (6) ◽  
pp. 700-710 ◽  
Author(s):  
Katherine S. Virgo ◽  
Lowell W. McKirgan ◽  
Michele C. A. Caputo ◽  
Diana M. Mahurin ◽  
Leigh C. Chao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document