Factors affecting the hydrogen cyanide potential of forage sorghum.

1990 ◽  
Vol 41 (6) ◽  
pp. 1093 ◽  
Author(s):  
JL Wheeler ◽  
C Mulcahy ◽  
JJ Walcott ◽  
GG Rapp

The effect of seven factors, namely genotype, plant maturity, nitrogen fertilizer, phosphorus fertilizer, water stress, light intensity and temperature, on the hydrogen cyanide potential (HCNp) of forage sorghum was studied in three pot experiments. Fivefold differences occurred between genotypes in HCNp, with a breeder's line, X45106, selected for low HCNp having a maximum of 520 mg HCN kg-1 DM (dry matter) compared with 2300 and 2450 mg kg-1 DM for cvs Zulu and Silk respectively. In X45 106, HCNp (mg HCN kg-1 DM) declined curvilinearly with age d (days from sowing) (HCNp=8460- 320d+ 3.1d2) and linearly in Silk (HCNp = 9020 - 110d), but the decline in Zulu was not statistically significant. Nitrogen (equivalent to 200 kg ha-1 of N) increased HCN, (P< 0.001), but more so in full light (100 mg kg-1 compared with 1430 mg kg-1) than in 50% shade (190 mg kg-1 compared with 690 mg kg-1). In one experiment, acute water stress appeared to reduce HCNp, but this was confounded with the strong decline due to aging. In another study, acute water stress had no effect on HCNp. Neither the application of superphosphate nor change in light intensity, nor change in temperature had a direct significant effect on HCNp in these studies. Breeding and selection for low HCNp appears a promising approach to ensuring that sorghum plants will provide non-toxic forage from an early stage of growth.

1994 ◽  
Vol 45 (5) ◽  
pp. 985 ◽  
Author(s):  
M Cooper ◽  
DE Byth ◽  
DR Woodruff

The objective of this study was to use classification methodology to characterize the genotypic variation and line by environment (L x E) interaction for grain yield of a sample of advanced CIMMYT wheat lines and three local check cultivars tested over six Queensland environments. The environments were managed to differ in the magnitude of water stress they imposed on the lines at the critical developmental stage of anthesis. The grouping of lines was based on grain yield. The yield differences among the groups were investigated in terms of yield components and dry matter production and partitioning attributes. Groups of CIMMYT lines which outyielded the two groups which contained the three Queensland cultivars were identified. The yield advantage of the groups of CIMMYT lines decreased with increasing severity of water stress at anthesis and in the environment where the most severe stress was characterized there were no yield differences among the groups of lines. The yield advantage of the groups of CIMMYT lines was generally associated with a higher number of grains per unit area and in some cases a higher grain size. While phenology variation could account for some of the yield differences among the line groups there was considerable yield variation among line groups with similar phenology patterns across the environments. Additional measurements taken on the lines to characterize differences in dry matter production and the partitioning of the dry matter to yield components were not effective in explaining the yield variation among the groups of lines after the effects of phenology were taken into account. While the incidence of the large L x (water-stress) interactions encountered in this study would complicate selection for yield, the identification of groups of advanced CIMMYT lines which outyielded the Queensland cultivars in five of the six environments suggests that the L x (water stress) interactions do not preclude scope for further improvement of grain yield of wheat in Queensland.


Crop Science ◽  
1986 ◽  
Vol 26 (6) ◽  
pp. 1123-1126 ◽  
Author(s):  
N. J. Ehlke ◽  
M. D. Casler ◽  
P. N. Drolsom ◽  
J. S. Shenk

2020 ◽  
Vol 53 (12) ◽  
pp. 5473-5487 ◽  
Author(s):  
Andrea Rispoli ◽  
Anna Maria Ferrero ◽  
Marilena Cardu

AbstractTunnel boring machine (TBM) performance prediction is often a critical issue in the early stage of a tunnelling project, mainly due to the unpredictable nature of some important factors affecting the machine performance. In this regard, deterministic approaches are normally employed, providing results in terms of average values expected for the TBM performance. Stochastic approaches would offer improvement over deterministic methods, taking into account the parameter variability; however, their use is limited, since the level of information required is often not available. In this study, the data provided by the excavation of the Maddalena exploratory tunnel were used to predict the net and overall TBM performance for a 2.96 km section of the Mont Cenis base tunnel by using a stochastic approach. The preliminary design of the TBM cutterhead was carried out. A prediction model based on field penetration index, machine operating level and utilization factor was adopted. The variability of the parameters involved was analysed. A procedure to take into account the correlation between the input variables was described. The probability of occurrence of the outcomes was evaluated, and the total excavation time expected for the tunnel section analysed was calculated.


Author(s):  
Jinbao Zhang ◽  
Jaeyoung Lee

Abstract This study has two main objectives: (i) to analyse the effect of travel characteristics on the spreading of disease, and (ii) to determine the effect of COVID-19 on travel behaviour at the individual level. First, the study analyses the effect of passenger volume and the proportions of different modes of travel on the spread of COVID-19 in the early stage. The developed spatial autoregressive model shows that total passenger volume and proportions of air and railway passenger volumes are positively associated with the cumulative confirmed cases. Second, a questionnaire is analysed to determine changes in travel behaviour after COVID-19. The results indicate that the number of total trips considerably decreased. Public transport usage decreased by 20.5%, while private car usage increased by 6.4%. Then the factors affecting the changes in travel behaviour are analysed by logit models. The findings reveal significant factors, including gender, occupation and travel restriction. It is expected that the findings from this study would be helpful for management and control of traffic during a pandemic.


Author(s):  
Andrea Petetta ◽  
Massimo Virgili ◽  
Stefano Guicciardi ◽  
Alessandro Lucchetti

AbstractStock overexploitation, bycatch, discards and gear impacts on the environment are outstanding issues for Mediterranean fisheries. The adoption of alternative fishing gears is an appealing solution to ensure a more sustainable exploitation of resources. We discuss the pros and cons of pots as alternative gears by reviewing their main designs, spatial distribution and target species in the Mediterranean basin. We assessed the technical factors affecting the catch efficiency of the different pot designs for four target species: spiny lobster, Palinurus elephas; Norway lobster, Nephrops norvegicus; common octopus, Octopus vulgaris and pandalid shrimps, Plesionika spp. We found that pot volume is important to catch Octopus; mesh size to catch Nephrops and Plesionika; entrance surface to catch Octopus, Nephrops and Plesionika; pot shape/colour and entrance shape/position to catch Octopus and Plesionika; and bait type to catch Octopus and Nephrops. The literature review shows that pot fisheries have several considerable advantages over conventional gears, especially in terms of discards, bycatch, seabed impacts (particularly compared with bottom trawls and passive set nets), size and species selectivity, gear depredation, catch quality and gear cost, besides saving time and labour. Disadvantages hampering their wider diffusion include ghost fishing, a low catch of finfish species, the narrow range of species targeted by each pot design and the current early stage of research. These data make a clear case for using pots as alternative gears to traditional ones in the Mediterranean Sea in some areas and seasons to catch certain target species.


1991 ◽  
Vol 18 (1) ◽  
pp. 53 ◽  
Author(s):  
PC Pheloung ◽  
KHM Siddique

Field experiments were conducted in the eastern wheat belt of Western Australia in a dry year with and without irrigation (1987) and in a wet year (1988), comparing three cultivars of wheat differing in height and yield potential. The aim of the study was to determine the contribution of remobilisable stem dry matter to grain dry matter under different water regimes in old and modern wheats. Stem non-structural carbohydrate was labelled with 14C 1 day after anthesis and the activity and weight of this pool and the grain was measured at 2, 18 and 58 days after anthesis. Gutha and Kulin, modern tall and semi-dwarf cultivars respectively, yielded higher than Gamenya, a tall older cultivar in all conditions, but the percentage reduction in yield under water stress was greater for the modern cultivars (41, 34 and 23%). In the grain of Gamenya, the increase in 14C activity after the initial labelling was highest under water stress. Generally, loss of 14C activity from the non-structural stem dry matter was less than the increase in grain activity under water stress but similar to or greater than grain activity increase under well watered conditions. Averaged over environments and cultivars, non-structural dry matter stored in the stem contributed at least 20% of the grain dry matter.


2016 ◽  
Vol 29 (7) ◽  
pp. 721-732 ◽  
Author(s):  
Ahmed Essmat Shouman ◽  
Nahla Fawzy Abou El Ezz ◽  
Nivine Gado ◽  
Amal Mahmoud Ibrahim Goda

Purpose – The purpose of this paper is to measure health-related quality of life (QOL) among patients with early stage cancer breast under curative treatment at department of oncology and nuclear medicine at Ain Shams University Hospitals. Identify factors affecting QOL among these patients. Design/methodology/approach – A cross-sectional study measured QOL among early stage female breast cancer (BC) patients and determined the main factors affecting their QOL. Three interviewer administered questionnaires were used. Findings – The physical domain mostly affected in BC patients and the functional domain least. Socio-demographic factors that significantly affected BC patients QOL scores were patient age, education, having children and family income. Specific patient characteristics include caregiver presence – a factor that affected different QOL scores. Age at diagnosis, affection in the side of the predominant hand, post-operative chemotherapy and difficulty in obtaining the medication were the disease-related factors that affected QOL scores. Originality/value – The final model predicting QOL for early stage female BC patients included age, education and difficulty in obtaining the medication as determinants for total QOL score. Carer presence was the specific patient characteristic that affected different QOL scores.


Archaeometry ◽  
2013 ◽  
Vol 56 (4) ◽  
pp. 689-702 ◽  
Author(s):  
M. A. Wilson ◽  
S. Clelland ◽  
M. A. Carter ◽  
C. Ince ◽  
C. Hall ◽  
...  

1968 ◽  
Vol 48 (2) ◽  
pp. 129-137 ◽  
Author(s):  
A. R. Maurer ◽  
H. F. Fletcher ◽  
D. P. Ormrod

Pea plants growing in "weighing lysimeters" were subjected to five soil-water regimes to determine their response to varying conditions of soil water imposed at different stages of development. Plants subjected to a minimal water stress developed luxuriantly and continued to grow up to the harvest period. Pea yield and plant height were not reduced, but fresh weight and dry matter were less if irrigation was applied when soil water fell to 60% rather than 88% of that available. A severe water stress after blossom reduced pea yield, irrespective of soil-water conditions prior to blossom. Plants which had been given ample soil water before blossom wilted visibly when a severe stress was imposed in the post-blossom period, yet wilting did not occur in plants subjected to severe water stress both before and after blossom. Severe water stress prior to blossom did not cause a decrease in pea yield if ample soil moisture was made available after blossom.


1987 ◽  
Vol 23 (2) ◽  
pp. 193-200 ◽  
Author(s):  
J. M. O. Eze

SummaryThe growth of Amaranthus hybridus under different daylight intensities was assessed in terms of physical, morphological and biochemical parameters. Maximum growth in many respects was achieved at about 70% of full daylight. However, full daylight favoured chlorophyll stability and maximum accumulation of total dry matter, carbohydrate, chlorophyll and ascorbic acid. The leaf area ratio increased uniformly with decrease in light intensity. Ageing was accelerated by full daylight. Reduced light intensity reduced dry matter accumulation in the roots more than in the stems or leaves.


Sign in / Sign up

Export Citation Format

Share Document