Rotation in relation to take-all of wheat

1951 ◽  
Vol 2 (3) ◽  
pp. 283 ◽  
Author(s):  
HR Angell ◽  
M Mills
Keyword(s):  
Grain Yield ◽  
Alluvial Soil ◽  
Grain Weight ◽  
The Other ◽  
Total Weight ◽  
Harvest Time ◽  
Root Infection ◽  
The Mean ◽  
Take All

Using an infertile, sandy, alluvial soil in drums, the effect of five rotations on take-all of wheat (Ophiobolus graminis) was tested. The soil was limed initially. The root-infection rating, total grain weight, and total weight of the wheat plants in each year were recorded. The condition of the roots at harvest time in the final year was significantly worse in the ranunculus and oats-fallow rotations, and possibly worse in the two years' fallow, than in the continuous wheat and two years' grass rotations. In contrast with the condition of the roots, the mean grain yield and mean total weight of the wheat plants in the ranunculus, oats-fallow, and two years' fallow were significantly higher than those obtained in the other two rotations. From the results of this experiment it is evident that the mechanism of control is not, as is commonly suggested, the elimination of the root-rotting organism.

scholarly journals Tests of amounts and times of application of nitrogen and of sequential sprays of aphicide and fungicides on winter wheat, following either beans or wheat, and the effects of take-all (Gaeumannomyces graminis var. tritici), on two varieties at Saxmundham, Suffolk 1980–3

1985 ◽  
Vol 105 (1) ◽  
pp. 97-122 ◽  
Author(s):  
F. V. Widdowson ◽  
A. Penny ◽  
R. J. Gutteridge ◽  
R. J. Darby ◽  
M. V. Hewitt
Keyword(s):  
Winter Wheat ◽  
The Other ◽  
Gaeumannomyces Graminis ◽  
Final Number ◽  
Root Rots ◽  
Two Factors ◽  
The Mean ◽  
Yield Responses ◽  
Take All ◽  
Number Of Shoots

SUMMARYFrom 1980 to 1983 factorial experiments at Saxmundham were made on winter wheat following beans, so as to minimize losses from foot and root rots and increase potential yields. All tested seed-bed N, and amounts and times of application of N in spring, both with and without sprays intended to limit losses from aphids and from diseases. The tests were made on one semi-dwarf variety in 1980 and on two contrasting varieties from 1981 to 1983. In 1982 and 1983 a comparison was made between wheat following beans and wheat following wheat; all treatments were applied cumulatively to the two successive wheat crops.In 1980 and in 1981 N given in March greatly increased the number of shoots in April but had little effect on the final number of ears. Yields of grain were greatly increased by N given during April and by sequential sprays with fungicides and aphicide; these two factors interacted so that responses to N were larger with the sprays than without. Yield responses to seed-bed N, although small, were greater than the benefits from applying divided instead of single N dressings in spring. The number of ears was greatly increased by increasing the amount of N given in April, but only slightly by any of the other treatments. The weight of 1000 grains was greatly increased by the sprays of aphicide and fungicides and was decreased by N in 1981, but not in 1980. Largest yields of grain were 10·14 t/ha in 1980 and 10·91 t/ha in 1981 when N was given in spring at 160 and 200 kg/ha respectively, and the crops were sprayed with pesticides.In 1982 and 1983 N applied in March again greatly increased the number of shoots in April, but not the final number of ears. Yields of grain were larger after beans than after wheat, mainly because the number of ears and the weight of 1000 grains were greater. This may have been because take-all (Gaeumannomyces graminisvar. tritici) was more severe where wheat followed wheat. Previous cropping also interacted with variety; Avalon yielded slightly less than Norman where take-all was slight but much less where take-all was severe. Where N was given the mean loss in yield from growing Avalon rather than Norman in the 2 years was 2·47 t/ha after wheat and 0·37 t/ha after beans. The take-all disease ratings of Norman and Avalon after wheat were 132 and 197 respectively. Yields of grain were greatly increased by N given during April, especially of wheat following wheat and where it was protected with sprays; then the mean yield was only 2·79 t/ha without N but 8·78 with 235 kg N/ha. Where wheat followed beans, yields were 6·89 t/ha without N and 11·07 with 175 kg N/ha. Applying N to the seed bed increased yields slightly, and again by more than by dividing the dressing of N in spring. The number of ears was greatly increased by N in spring and a little by all the other factors that increased grain yield. The weight of 1000 grains was increased greatly by the sprays of aphicide and fungicides, was decreased by N, and was larger for Norman than for Avalon.In 1980–1, after beans, the mean amounts of N removed by the grain (where aphicide and fungicides were given) ranged from 81 kg/ha without N fertilizer to 167 where most N was given. In 1982–3 comparable values ranged from 86 kg N/ha to 191 where wheat followed beans and from 35 kg N/ha to 168 where wheat followed wheat.

Source - sink effects on grain weight of bread wheat, durum wheat, and triticale at different locations

2006 ◽  
Vol 57 (2) ◽  
pp. 227 ◽  
Author(s):  
Daniel F. Calderini ◽  
M. P. Reynolds ◽  
G. A. Slafer
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Bread Wheat ◽  
Grain Filling ◽  
Grain Weight ◽  
The Other ◽  
Field Conditions ◽  
Breeding Strategies ◽  
Source Sink ◽  
Source Limitation

Source limitation during grain filling is important for both management and breeding strategies of grain crops. There is little information on the sensitivity of grain weight of temperate cereals to variations in source–sink ratios, and no studies are available on the comparative behaviour of temperate cereals growing together in the same experiment. The objective of the current study was to evaluate, under field conditions, the response of grain weight to different source–sink ratios during grain filling in high-yielding cultivars of bread wheat, durum wheat, and triticale at 2 contrasting locations. Two experiments were carried out at C. Obregon and El Batan in Mexico. In each location, 6 genotypes (2 bread wheat, 2 durum wheat, 2 triticale) were evaluated. A week after anthesis, 2 source–sink (control and halved spikes) treatments were imposed. Location and genotype significantly (P < 0.01) affected grain yield and components. Significant grain weight increases (P < 0.05) were found only in 2 cases in El Batan. The highest response of 17% was found in triticale, with less than 10% in most of the other genotypes. The effect of genotype and location is discussed.

Effect of timing of pasture grass removal on subsequent take-all incidence and yield in wheat in southern New South Wales

2002 ◽  
Vol 42 (8) ◽  
pp. 1087 ◽  
Author(s):  
C. R. Kidd ◽  
G. M. Murray ◽  
J. E. Pratley ◽  
A. R. Leys
Keyword(s):  
Grain Yield ◽  
New South ◽  
New South Wales ◽  
The Other ◽  
Gaeumannomyces Graminis ◽  
Wheat Crop ◽  
Late Winter ◽  
Pasture Grass ◽  
South Wales ◽  
Take All

Winter cleaning is the removal of grasses from pasture using selective herbicides applied during winter. We compared the effectiveness of an early (June) and late (July) winter cleaning with an early spring herbicide fallow (September), spring (October) herbicide and no disturbance of the pasture on development of the root disease take-all in the subsequent wheat crop. Experiments were done at 5 sites in the eastern Riverina of New South Wales in 1990 and 1991. The winter clean treatments reduced soil inoculum of Gaeumannomyces graminis var. tritici (Ggt) compared with the other treatments at all sites as measured by a bioassay, with reductions from the undisturbed treatments of 52–79% over 5 sites. The winter clean treatments also significantly reduced the amount of take-all that developed in the subsequent wheat crop by between 52 and 83%. The early and late winter clean treatments increased the number of heads/m2 at 3 and 1 sites, respectively. Dry matter at anthesis was increased by the winter clean treatments at 3 sites. Grain yield was increased by the winter cleaning treatments over the other treatments at the 4 sites harvested, with yield increases of the early winter clean over the undisturbed treatment from 13 to 56%. The autumn bioassay of Ggt was positively correlated with spring take-all and negatively correlated with grain yield of the subsequent wheat crop at each site. However, there was a significant site and site × bioassay interaction so that the autumn bioassay could not be used to predict the amount of take-all that would develop.

Effects of seven factors on the growth and yield of winter barley grown as a third consecutive take-all susceptible crop and of growing the barley after oats or a fallow

1992 ◽  
Vol 119 (3) ◽  
pp. 303-333 ◽  
Author(s):  
J. F. Jenkyn ◽  
N. Carter ◽  
R. J. Darby ◽  
R. J. Gutteridge ◽  
L. A. Mullen ◽  
...  
Keyword(s):  
Grain Yield ◽  
Growth Regulator ◽  
Dry Matter ◽  
Barley Yellow Dwarf Virus ◽  
Winter Barley ◽  
Growth And Yield ◽  
Seed Rate ◽  
Stem Extension ◽  
The Mean ◽  
Take All

SUMMARYIn experiments at Rothamsted in 1984–86, seven factors, each at two levels, were tested in factorial combination on winter barley (cv. Panda) grown as a third take-all susceptible crop. The factors were seed rate, a growth regulator prior to stem extension, amounts of N in spring, ‘winter’ nitrogen, an autumn insecticide, a fungicide applied to the seed (‘Baytan’) and a programme of fungicide sprays in spring and summer. Sowing 50% more seeds than normal increased the number of ears/unit area but had no effect on mean grain yield because grains were smaller. There were, however, significant, but unexplained, interactions between seed rate and the fungicide ‘Baytan’ applied to the seed. A growth regulator applied prior to stem extension had little effect on crop growth and no significant effect on grain yield. If sufficient N was applied in April there was little benefit from applying ‘winter’ N (30 kg/ha in November and again in February/March) except in 1985 when the amount of NO3-N in the soil, measured in the previous October, was lowest. Insecticide sprays applied in autumn to control the aphid vectors of barley yellow dwarf virus (BYDV) had no significant effect on grain yield but infectivity indices were below the threshold needed for treatment in each year. On average, ‘Baytan’ applied to the seed increased grain yield by 0·28 t/ha and this was associated with decreases in the severity of take-all. Over the three years, programmes of fungicide sprays, applied during spring and summer, increased grain yield by 0·92 t/ha but the mean response was largest where most N was applied.The experiments also allowed the importance of interactions between different agronomic factors to be examined. A combined analysis of grain yields for all three years (based on 192 plot values) showed that only six 2- or 3-factor interactions, out of the 73 estimated, were significant (P < 0·05). Two of these interactions reflected variable responses to ‘winter’ N and fungicide sprays in the three years and three of the remaining four involved ‘Baytan’.Additional plots of barley grown after oats had little take-all and yielded 1·14 t/ha more grain than similarly treated plots grown after barley. These responses were obtained despite evidence that oat residues had adverse effects on the growth of barley seedlings. Additional plots of barley grown after a bare fallow also had little take-all and gave even larger total yields (grain plus straw) than did barley after oats but the mean yield of grain was less than after oats because more of the dry matter after a fallow was straw. In 1984, when take-all was relatively slight, plots after a fallow gave even less grain than plots after barley (−0·77 t/ha) despite producing 2·12 t/ha more dry matter in grain plus straw.

The helminth community of the sand smelt (Atherina boyeri Risso, 1810) from Lake Iznik, Turkey

2011 ◽  
Vol 87 (2) ◽  
pp. 129-134 ◽  
Author(s):  
S. Özesen Çolak
Keyword(s):  
Food Supply ◽  
Parasite Species ◽  
Early Spring ◽  
The Other ◽  
Total Weight ◽  
Helminth Community ◽  
Metazoan Parasites ◽  
Mean Intensity ◽  
The Mean ◽  
Tylodelphys Clavata

AbstractMetazoan parasites of the sand smelt Atherina boyeri Risso, 1810 in Lake Iznik were studied. A total of 271 specimens of A. boyeri, 208 female and 63 male, mean ( ± SD) total length 8.4 ± 2.2 cm (range 3.1–12.2 cm) and mean total weight 4.7 ± 3.5 g (range 0.1–11.7 g) were examined between June 2008 and May 2009 at monthly intervals. In 33 fish no parasites were found. In the other fish, four parasite species were recorded: Diplostomum sp. (prevalence 39.13%, mean intensity 3.50 ± 3.03); Tylodelphys clavata (prevalence 74.16%, mean intensity 10.41 ± 14.89); Bothriocephalus cf. acheilognathi (prevalence 40.59%, mean intensity 31.83 ± 57.74); and Eustrongylides excisus (prevalence 6.64%, mean intensity 1.16 ± 0.39). The mean abundance of Diplostomum sp., T. clavata and E. excisus was higher during the winter and early spring months. In contrast, the mean abundance of B. cf. acheilognathi was higher in the summer and autumn months. This distribution of the parasites was related to a change in the environment of A. boyeri from the pelagic zone to deeper water at the end of autumn and a change in food supply.

Population studies with wheat: I. Sampling

1939 ◽  
Vol 29 (1) ◽  
pp. 76-110 ◽  
Author(s):  
H. G. Hudson
Keyword(s):  
Large Scale ◽  
Population Studies ◽  
Sampling Error ◽  
Grain Weight ◽  
The Other ◽  
Sampling Unit ◽  
Stem Number ◽  
Optimum Sampling ◽  
The Mean ◽  
Ear Number

The design and field technique of two large scale experiments, laid down to investigate the problems of sampling and “propinquity”, are described in detail. These experiments were designed so that the plant number, stem number, ear number, straw weight and grain weight for 7200 lengths of 6 in. of drill row, together with the position of each observation, might be obtained.The lowest sampling error, expressed as a percentage of the mean, is obtained by using the smallest sampling unit, but the large number of sampling units of this size that would have to be taken make it impracticable. The optimum sampling unit consists of 6 ft. of drill row, taken as 3 ft. of two adjacent rows. The size of the sampling unit is of greater importance than the shape in determining its accuracy, and little s lost by using sampling units of 18 in. of five adjacent rows.The nature of the observation affects the degree of sampling. In the experiments examined the plant number, stem number and ear number require very similar sampling, but grain weight requires a sample which is about twice as large as that required by the other observations.The percentage of the plot that must be taken as a sample (the sampling percentage) to obtain any given accuracy is related to the size of plot: the larger the plot, the lower the sampling percentage necessary. To obtain an error of 5% of the mean the sampling percentage for grain weight is approximately 5% in 1/20 acre plots, 15% in 1/100 acre plots and 43% in 1/600 acre plots if the plots are not subdivided. These percentages are similar to those calculated from various randomized block experiments in Cambridge.

Assessment of yield loss caused by common root rot in wheat cultivars in Queensland

1992 ◽  
Vol 43 (1) ◽  
pp. 43 ◽  
Author(s):  
GB Wildermuth ◽  
RD Tinline ◽  
RB McNamara
Keyword(s):  
Grain Yield ◽  
Disease Severity ◽  
Root Rot ◽  
Yield Loss ◽  
Grain Weight ◽  
The Other ◽  
Regression Equations ◽  
Yield Losses ◽  
Common Root ◽  
Common Root Rot

The effects of common root rot (CRR) caused by Bipolaris sorokiniana on grain yield, number of tillers, number of grains and grain weight of wheat plants were determined in four field experiments. Sites with different soil populations of B. sorokiniana were selected and inoculum of the fungus added to some plots. Disease and yield measurements were made on eight cultivars and lines differing in susceptibility to CRR. Timgalen, Songlen and Hartog were susceptible whereas Kite, 1008 C16, 141-4 and ISWYN 32 were partially resistant to CRR. Grain yield, tiller and grain number, but not grain weight decreased as disease severity increased. Diseased plants had lower tiller numbers than healthy ones and as a consequence a reduced number of grains and grain yield per plant. Five methods were compared for estimating yield loss caused by the disease. Polynomial regression equations for each cultivar between yield and disease rating of sub-crown internodes or multiple regression equations between yield and disease parameters of sub-crown internodes or tiller bases were established. A third method involved the projection of yield losses from one cultivar to other cultivars and in a fourth method yield losses were estimated from actual yields. In addition, an equation Yield loss (%) = 3 46 + 0.23 disease severity) (%) was established in one experiment and used as a fifth method in the other experiments. Yield losses estimated by methods 1 and 2 were similar and higher than those from the other methods. In areas where disease severity is high, methods 1 and 5 appear to be the most suitable for determining yield losses. Losses in a susceptible cultivar, Timgalen, varied between 13.9 and 23.9% whereas those in a partially resistant cultivar, 1008 C16, varied between 6.8 and 13.6%.

scholarly journals Grain filling patterns of barley as affected by high temperature stress

2017 ◽  
Vol 15 (2) ◽  
pp. 174-181
Author(s):  
Md Rasel Rana ◽  
Md Masudul Karim ◽  
Md Juiceball Hassan ◽  
Md Alamgir Hossain ◽  
Md Ashraful Haque
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
High Temperature Stress ◽  
Water Soluble ◽  
Grain Weight ◽  
Soluble Carbohydrates ◽  
Barley Cultivars ◽  
The Mean ◽  
Grain Filling Period

Grain filling determines the grain weight, a major component of grain yield in cereals. Grain filling in barley depends on current assimilation and culm reserves (mainly water-soluble carbohydrates). Nowadays barley is facing heat stress problem which is mostly responsible to reduce the yield of barley. A field experiment was conducted at the Field Lab, Department of Crop Botany, BangladeshAgriculturalUniversity, Mymensingh during November 2015 to March 2016 to study the grain filling patterns and the contributions of culm reserves to grain yield under heat stress. The experiment consisted of two factors—barley cultivars and heat stress. The heat stress was imposed by late sowing. The tillers were sampled once a week during grain filling period to determine the changes in dry weights of different parts, viz., leaves, culm with sheath, spikes, and grains; and to examine the contribution of culm reserves to grain yield. The results in the experiment revealed that the grain yield was reduced by 22-28% due to the stress. The grain yield varied from 52 to 150 g m−2 with the mean of 102 g m−2 under control while it varied from 37 to 116 g m−2 with the mean of 75 g m−2 under heat stress. Among the cultivars studied BARI Barley5, BARI Barley2 and BARI Barley1, seemed as high yielders while BARI Barley3, BARI Barley4, BARI Barley6 as the low yielders under heat stress treatment. The reduction in grain yield was attributable mainly to lighter grain weight due to the stress. Heat stress drastically reduced the grain filling duration by 45–50%. However, the stress increased the grain filling rate by 6–53%. The amount of reserves remobilized to grain varied among the cultivars ranging from 4.8 to 12.77 mg spike−1 in control and from 1.73 to 6.25 mg spike−1 in stressed plants. The stressed barley plants exhibited lower accumulation of reserves in culm but they showed almost its complete remobilization to the grain. The contribution of culm reserves to grain yield varied from 1.13 to 19.52%, and 1.09 to 2.11% in control and in stressed plants, respectively. In conclusion, culm reserve is the important attributes in grain yield in Bangladeshi barley cultivars but the contribution remains almost unaffected due the post-anthesis heat stress.J. Bangladesh Agril. Univ. 15(2): 174-181, December 2017

scholarly journals Nature and magnitude of genetic variability, heterosis and inbreeding depression in Amaranthus

Genetika ◽  
2007 ◽  
Vol 39 (2) ◽  
pp. 251-258
Author(s):  
R.M. Pandey
Keyword(s):  
Genetic Variability ◽  
Grain Yield ◽  
Inbreeding Depression ◽  
Combining Ability ◽  
Harvest Index ◽  
Genetic Variance ◽  
Additive Genetic Variance ◽  
Grain Weight ◽  
The Other ◽  
Panicle Length

Combining ability, heterosis and inbreeding depression were estimated in grain amaranths for ten characters. Non-additive genetic variance was predominant for majority of characters in both F1 and F2 generations. The parent AG-21 was good general combiner for yield/plant also showed high GCA effects for panicles/plant and harvest index in both F1 and F2 generations. Seven characters, the best F2s on the basis of SCA involves one parent with high GCA effect and the other with poor or average GCA effects. The hybrids which exhibited highest heterosis also showed high inbreeding depression. Heterosis over better parent was highest for economic grain yield (145.047%), followed by panicles/plant (113.675%), panicle length (33.656%) and grain weight/panicle (23.566%).

scholarly journals On Farm Testing of Rice Residue Management Techniques for Wheat (Triticum aestivum L.) Establishment in Punjab

2021 ◽  
Vol 57 (4) ◽  
pp. 85-88
Author(s):  
Alok Gupta ◽  
Pritpal Singh ◽  
Gurdeep Singh ◽  
Bhallan Singh Sekhon ◽  
Gurjinder Pal Singh Sodhi
Keyword(s):  
Triticum Aestivum ◽  
Grain Yield ◽  
Plant Height ◽  
Triticum Aestivum L ◽  
Grain Weight ◽  
The Other ◽  
Residue Management ◽  
Wheat Grain ◽  
Residue Incorporation ◽  
1000 Grain Weight

Rice residue management (RRM) has been the key component of systems’ sustainability. The paper reports the effect of different RRM and wheat (Triticum aestivum L.) establishment methods on productivity and yield contributing attributes through farmer participatory mode in south-western Punjab. Different RRM technologies including rice residue removal, residue incorporation and residue retention on soil as surface mulch were evaluated. Wheat grain yield was significantly (p<0.05) higher with happy seeder method of wheat establishment following chopping of loose rice stubble, which acts as surface mulch, compared with the other RRM technologies. Wheat grain yield in other RRM technologies viz. rice residue incorporation and removal did not differ significantly. The yield contributing attributes viz. plant height, number of effective tillers m-1 row length, 1000-grain weight, ear length and the number of grains ear-1 were significantly higher in happy seeder method of wheat establishment. The weed count (Phalaris minor) was significantly lower than the other compared methods of RRM. The correlation matrix exhibited a linear positive relationship between the grain yield and plant height (r=0.951*; p<0.05), ear length (r=0.941*), 1000-grain weight (r=0.853*) and number of grains ear-1 (r=0.771*). All economic indices viz. average net (Rs. 74, 840/- ha-1), gross returns (Rs. 1,00,620/- ha-1) and benefit-cost (B:C; 3.9) ratio were significantly enhanced because of low cost of cultivation (Rs. 25,780/- ha-1) under happy seeder method of wheat establishment.

Sign in / Sign up

Export Citation Format

Share Document