The Role of the Angle Components in the Wings-in and Wings-out Forms of the Müller-Lyer Illusion

Perception ◽  
1996 ◽  
Vol 25 (7) ◽  
pp. 773-781 ◽  
Author(s):  
John Predebon

The effect of selective amputations of the angle components in the wings-in (underestimated) and wings-out (overestimated) forms of the Müller-Lyer illusion was examined in two experiments. The stimulus figures consisted of one, two, or four angles. In experiment 1 the method of paired comparisons was used to scale the figures on the psychological continuum of length, and in experiment 2 the method of reproduction was used to obtain quantitative measures of illusion magnitude. There was good agreement between the scaling and the length-reproduction measures of the illusion. The illusory effects in all figures were significant, and the extent of the underestimation and overestimation of the wings-in and wings-out figures, respectively, increased as the number of angles increased. In general, selective amputation of the angle components produced similar patterns of illusory effects in the wings-in and wings-out figures. These findings are discussed with reference to the issue of whether the two forms of the conventional (ie four-angle) Müller-Lyer illusion are similar or distinct illusion types.

Author(s):  
M. Broyde ◽  
P. Donati ◽  
J. Bitsch

A subjective method of paired comparisons was developed to compare the discomfort caused by the vibration from hand-held power tools with the predictions obtained using the procedures recommended by standards for the evaluation of human exposure to hand-transmitted vibration. Fiteen trained subjects were exposed in the laboratory to seven different vibration exposures produced by five hand-held tools (one of the tools was used in two positions) and an electrodynamic vibrator. The good agreement observed between and within subjects shows that they can reliably rank vibration dicomfort produced by different hand-held tools. For five vibration exposures out of seven, the rank deduced from the subjective assessments was in accord with the rank of the predicted evaluations derived from the frequency-weighted acceleration values measured. An exposure with highly impulsive vibration was rated as being much more annoying than it was foreseen by the current procedures of evaluation. The operator's position proved to be an important factor in the perception of the discomfort.


Fluids ◽  
2021 ◽  
Vol 6 (6) ◽  
pp. 215
Author(s):  
Paul McGinn ◽  
Daniel Pearce ◽  
Yannis Hardalupas ◽  
Alex Taylor ◽  
Konstantina Vogiatzaki

This paper provides new physical insight into the coupling between flow dynamics and cavitation bubble cloud behaviour at conditions relevant to both cavitation inception and the more complex phenomenon of flow “choking” using a multiphase compressible framework. Understanding the cavitation bubble cloud process and the parameters that determine its break-off frequency is important for control of phenomena such as structure vibration and erosion. Initially, the role of the pressure waves in the flow development is investigated. We highlight the differences between “physical” and “artificial” numerical waves by comparing cases with different boundary and differencing schemes. We analyse in detail the prediction of the coupling of flow and cavitation dynamics in a micro-channel 20 m high containing Diesel at pressure differences 7 MPa and 8.5 MPa, corresponding to cavitation inception and "choking" conditions respectively. The results have a very good agreement with experimental data and demonstrate that pressure wave dynamics, rather than the “re-entrant jet dynamics” suggested by previous studies, determine the characteristics of the bubble cloud dynamics under “choking” conditions.


Organics ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 38-49
Author(s):  
Lakhdar Benhamed ◽  
Sidi Mohamed Mekelleche ◽  
Wafaa Benchouk

Experimentally, a reversal of chemoselectivity has been observed in catalyzed Diels–Alder reactions of α,β-unsaturated aldehydes (e.g., (2E)-but-2-enal) and ketones (e.g., 2-hexen-4-one) with cyclopentadiene. Indeed, using the triflimidic Brønsted acid Tf2NH as catalyst, the reaction gave a Diels–Alder adduct derived from α,β-unsaturated ketone as a major product. On the other hand, the use of tris(pentafluorophenyl)borane B(C6F5)3 bulky Lewis acid as catalyst gave mainly the cycloadduct of α,β-unsaturated aldehyde as a major product. Our aim in the present work is to put in evidence the role of the catalyst in the reversal of the chemoselectivity of the catalyzed Diels–Alder reactions of (2E)-but-2-enal and 2-Hexen-4-one with cyclopentadiene. The calculations were performed at the ωB97XD/6-311G(d,p) level of theory and the solvent effects of dichloromethane were taken into account using the PCM solvation model. The obtained results are in good agreement with experimental outcomes.


2021 ◽  
Author(s):  
Ignazio Giuntoli ◽  
Federico Fabiano ◽  
Susanna Corti

AbstractSeasonal predictions in the Mediterranean region have relevant socio-economic implications, especially in the context of a changing climate. To date, sources of predictability have not been sufficiently investigated at the seasonal scale in this region. To fill this gap, we explore sources of predictability using a weather regimes (WRs) framework. The role of WRs in influencing regional weather patterns in the climate state has generated interest in assessing the ability of climate models to reproduce them. We identify four Mediterranean WRs for the winter (DJF) season and explore their sources of predictability looking at teleconnections with sea surface temperature (SST). In particular, we assess how SST anomalies affect the WRs frequencies during winter focussing on the two WRs that are associated with the teleconnections in which the signal is more intense: the Meridional and the Anticyclonic regimes. These sources of predictability are sought in five state-of-the-art seasonal forecasting systems included in the Copernicus Climate Change Services (C3S) suite finding a weaker signal but an overall good agreement with reanalysis data. Finally, we assess the ability of the C3S models in reproducing the reanalysis data WRs frequencies finding that their moderate skill increases during ENSO intense years, indicating that this teleconnection is well reproduced by the models and yields improved predictability in the Mediterranean region.


2010 ◽  
Vol 138 (4) ◽  
pp. 1368-1382 ◽  
Author(s):  
Jeffrey S. Gall ◽  
William M. Frank ◽  
Matthew C. Wheeler

Abstract This two-part series of papers examines the role of equatorial Rossby (ER) waves in tropical cyclone (TC) genesis. To do this, a unique initialization procedure is utilized to insert n = 1 ER waves into a numerical model that is able to faithfully produce TCs. In this first paper, experiments are carried out under the idealized condition of an initially quiescent background environment. Experiments are performed with varying initial wave amplitudes and with and without diabatic effects. This is done to both investigate how the properties of the simulated ER waves compare to the properties of observed ER waves and explore the role of the initial perturbation strength of the ER wave on genesis. In the dry, frictionless ER wave simulation the phase speed is slightly slower than the phase speed predicted from linear theory. Large-scale ascent develops in the region of low-level poleward flow, which is in good agreement with the theoretical structure of an n = 1 ER wave. The structures and phase speeds of the simulated full-physics ER waves are in good agreement with recent observational studies of ER waves that utilize wavenumber–frequency filtering techniques. Convection occurs primarily in the eastern half of the cyclonic gyre, as do the most favorable conditions for TC genesis. This region features sufficient midlevel moisture, anomalously strong low-level cyclonic vorticity, enhanced convection, and minimal vertical shear. Tropical cyclogenesis occurs only in the largest initial-amplitude ER wave simulation. The formation of the initial tropical disturbance that ultimately develops into a tropical cyclone is shown to be sensitive to the nonlinear horizontal momentum advection terms. When the largest initial-amplitude simulation is rerun with the nonlinear horizontal momentum advection terms turned off, tropical cyclogenesis does not occur, but the convectively coupled ER wave retains the properties of the ER wave observed in the smaller initial-amplitude simulations. It is shown that this isolated wave-only genesis process only occurs for strong ER waves in which the nonlinear advection is large. Part II will look at the more realistic case of ER wave–related genesis in which a sufficiently intense ER wave interacts with favorable large-scale flow features.


1993 ◽  
Vol 300 ◽  
Author(s):  
S. Subramanian ◽  
B. M. Arora ◽  
A. K. Srivastava ◽  
S. Banerjee ◽  
G. Fernandes

ABSTRACTIn this paper we report a modified Kroemer's analysis for the determination of the band offset (ΔEc) of single quantum well (SQW) structures from simple C-V measurements. The experimental carrier profile from an MOVPE grown pseudomorphic GaAs/InGaAs/GaAs strained SQW structure shows a sharp accumulation peak bounded by depletion regions on either side. The full width at half maximum of the accumulation peak is comparable to the width of the quantum well. The value of ΔEC obtained from C-V measurement is in good agreement with the values determined by simulation and photoluminescence measurements. DLTS measurements on our SQW samples do not show any peaks which is contrary to the published reports. We believe that it is necessary to carefully isolate the role of interface states, before assigning a DLTS peak to emission from the quantum well.


1960 ◽  
Vol 7 (3) ◽  
pp. 471-474 ◽  
Author(s):  
Sam L. Witryol ◽  
William F. Fischer

1989 ◽  
Vol 149 ◽  
Author(s):  
S. Veprek ◽  
M. Heintze ◽  
R. Bayer ◽  
N. Jurčik-Rajman

ABSTRACTWe present new results of kinetic studies of the deposition of high quality a-Si:H which strongly support the reaction mechanism suggested in our earlier papers: 1. SiH4 → SiH2; 2. SiH2 + SiS4 → Si2H6 (SiH2 + Si2H6 → Si3H6); 3. Si2H6 → 2a-Si:H (Si3H8 → 3a-Si:H). The “SiH3 mechanism”, as promoted by several workers, is in contradiction with these experimental facts.The di- and trisilane, which have a much higher reactive sticking coefficient than monosilane, play the role of reactive intermediates which facilitate the heterogeneous decomposition of silicon carrying species at the surface of the growing film. The values of the reactive sticking coefficient of Si2H6 and Si3H8 depend on the surface coverage by chemisorbed hydrogen; they increase with decreasing surface coverage. Under the conditions of the growth of high quality a-Si:H films the reactive sticking coefficient of disilane amounts to 10−4 to 10−2 which is in a good agreement with recent data of other authors.The rate determining step of the growth of high quality a-Si:H films is the desorption of hydrogen from the surface of the growing film. This can be strongly enhanced by ion bombardment at impact energy of <100 eV. In this way, homogeneous, good quality films were deposited at rates up to 1800 Angströms/min, and there is a well justified hope that this rate can be further increased.


2005 ◽  
Vol 23 (3) ◽  
pp. 1075-1079 ◽  
Author(s):  
A. S. Leonovich ◽  
V. A. Mazur

Abstract. A new concept of the global magnetospheric resonator is suggested for fast magnetosonic waves in which the role of the resonator is played by the near-Earth part of the plasma sheet. It is shown that the magnetosonic wave is confined in this region of the magnetosphere within its boundaries. The representative value of the resonator's eigenfrequency estimated at f~1MHz is in good agreement with observational data of ultra-low-frequency MHD oscillations of the magnetosphere with a discrete spectrum (f~0.8, 1.3, 1.9, 2.6...MHz). The theory explains the ground-based localization of the oscillations observed in the midnight-morning sector of the high-latitude magnetosphere.


Sign in / Sign up

Export Citation Format

Share Document