scholarly journals Reduced model for capillary breakup with thermal gradients: Predictions and computational validation

2021 ◽  
Vol 33 (12) ◽  
pp. 122003
Author(s):  
I. Shukla ◽  
F. Wang ◽  
S. Mowlavi ◽  
A. Guyomard ◽  
X. Liang ◽  
...  
Keyword(s):  
Reduced Model ◽  
Thermal Gradients ◽  
Capillary Breakup ◽  
Computational Validation

Fission Gas Bubbles in Fractured UO2

1968 ◽  
Vol 26 ◽  
pp. 286-287
Author(s):  
O. M. Katz
Keyword(s):  
Electron Microscopy ◽  
Thermal Gradient ◽  
Gas Bubbles ◽  
Inert Gas ◽  
Thermal Gradients ◽  
Fission Gas ◽  
Beam Heating ◽  
Limited Application ◽  
Bubble Characteristics ◽  
Electron Beam Heating

The swelling of irradiated UO2 has been attributed to the migration and agglomeration of fission gas bubbles in a thermal gradient. High temperatures and thermal gradients obtained by electron beam heating simulate reactor behavior and lead to the postulation of swelling mechanisms. Although electron microscopy studies have been reported on UO2, two experimental procedures have limited application of the results: irradiation was achieved either with a stream of inert gas ions without fission or at depletions less than 2 x 1020 fissions/cm3 (∼3/4 at % burnup). This study was not limited either of these conditions and reports on the bubble characteristics observed by transmission and fractographic electron microscopy in high density (96% theoretical) UO2 irradiated between 3.5 and 31.3 x 1020 fissions/cm3 at temperatures below l600°F. Preliminary results from replicas of the as-polished and etched surfaces of these samples were published.

Reduced model error analysis “application to synchronous machines"

1994 ◽  
Vol 4 (10) ◽  
pp. 1999-2012 ◽  
Author(s):  
Nabil Derbel ◽  
Mohamed B.A. Kamoun ◽  
Michel Poloujadoff
Keyword(s):  
Error Analysis ◽  
Model Error ◽  
Synchronous Machines ◽  
Reduced Model ◽  
Analysis Application

REDUCED MODEL OF PLASMA DISCHARGE CONTROL IN TOKAMAK WITH IRON CORE

2020 ◽  
Vol 7 (3) ◽  
pp. 11-22
Author(s):  
VALERY ANDREEV ◽  
◽  
ALEXANDER POPOV
Keyword(s):  
Optimal Control ◽  
Inverse Problem ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Nonlinear Behavior ◽  
Plasma Discharge ◽  
Reduced Model ◽  
Iron Core ◽  
Power Sources ◽  
Real Power

A reduced model has been developed to describe the time evolution of a discharge in an iron core tokamak, taking into account the nonlinear behavior of the ferromagnetic during the discharge. The calculation of the discharge scenario and program regime in the tokamak is formulated as an inverse problem - the optimal control problem. The methods for solving the problem are compared and the analysis of the correctness and stability of the control problem is carried out. A model of “quasi-optimal” control is proposed, which allows one to take into account real power sources. The discharge scenarios are calculated for the T-15 tokamak with an iron core.

Hybrid Reduced Model of Rotor

2013 ◽  
Vol 60 (3) ◽  
pp. 319-333
Author(s):  
Rafał Hein ◽  
Cezary Orlikowski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Hybrid Model ◽  
Rotor System ◽  
Reduced Model ◽  
Order Model ◽  
Gyroscopic Effect ◽  
Reduced Models ◽  
Rigid Finite Element Method ◽  
Low Order

Abstract In the paper, the authors describe the method of reduction of a model of rotor system. The proposed approach makes it possible to obtain a low order model including e.g. non-proportional damping or the gyroscopic effect. This method is illustrated using an example of a rotor system. First, a model of the system is built without gyroscopic and damping effects by using the rigid finite element method. Next, this model is reduced. Finally, two identical, low order, reduced models in two perpendicular planes are coupled together by means of gyroscopic and damping interaction to form one model of the system. Thus a hybrid model is obtained. The advantage of the presented method is that the number of gyroscopic and damping interactions does not affect the model range

Limitations of a reduced model for the simulation of hydrogen/air combustion

AIAA Journal ◽  
1998 ◽  
Vol 36 ◽  
pp. 1752-1754
Author(s):  
W. S. Westmoreland ◽  
Pasquale Cinnella
Keyword(s):  
Reduced Model

Assessment of thermal behavior of a cooling system to reduce thermal fatigue cracks in aluminum injection molds

2020 ◽  
pp. 75-86
Author(s):  
Sergio Antonio Camargo ◽  
Lauro Correa Romeiro ◽  
Carlos Alberto Mendes Moraes
Keyword(s):  
Thermal Fatigue ◽  
Cooling System ◽  
Fatigue Cracks ◽  
Cooling Water ◽  
Thermal Conditions ◽  
Thermal Gradients ◽  
Ansys Software ◽  
Cooling Systems ◽  
Thermal Fatigue Cracks ◽  
Number Of Cycles

The present article aimed to test changes in cooling water temperatures of males, present in aluminum injection molds, to reduce failures due to thermal fatigue. In order to carry out this work, cooling systems were studied, including their geometries, thermal gradients and the expected theoretical durability in relation to fatigue failure. The cooling system tests were developed with the aid of simulations in the ANSYS software and with fatigue calculations, using the method of Goodman. The study of the cooling system included its geometries, flow and temperature of this fluid. The results pointed to a significant increase in fatigue life of the mold component for the thermal conditions that were proposed, with a significant increase in the number of cycles, to happen failures due to thermal fatigue.

Toward living nanomachines

2018 ◽  
Author(s):  
Christof Mast ◽  
Friederike Möller ◽  
Moritz Kreysing ◽  
Severin Schink ◽  
Benedikt Obermayer ◽  
...  
Keyword(s):  
Molecular Evolution ◽  
Thermal Gradient ◽  
Molecular Level ◽  
Minimal System ◽  
Thermal Gradients ◽  
Temperature Oscillations ◽  
Fluid Convection ◽  
Inanimate Matter ◽  
High Concentrations ◽  
Periodic Temperature

How does inanimate matter become transformed into animate matter? Living systems evolve by replication and selection at the molecular level and this chapter considers how to establish a synthetic, minimal system that can support molecular evolution and thus life. Molecular evolution cannot be explained by starting with high concentrations of activated chemicals that react toward their chemical equilibrium; persistent non-equilibria are required to maintain continuous reactivity and we especially consider thermal gradients as an early driving force for Darwinian molecular evolution. The temperature difference across water-filled compartments implements a laminar fluid convection with periodic temperature oscillations that allow for the melting and replication of DNA. Simultaneously, dissolved molecules are moved along the thermal gradient by an effect called thermophoresis. The combined result is an efficient molecule trap that exponentially favors long over short DNA and thus maintains complexity. Future experiments will reveal how thermal gradients could actively drive the Darwinian process of replication and selection.

Sign in / Sign up

Export Citation Format

Share Document