Analysis of acoustic flow on different nozzle exit shapes

2022 ◽  
Author(s):  
R. Sarweswaran ◽  
Peddada Aakarsh ◽  
Praveen Kumar ◽  
P. Manivannan ◽  
S. Sathish
Keyword(s):  
Nozzle Exit ◽  
Acoustic Flow

EFFECTS OF NOZZLE EXIT GEOMETRY ON SPRAY CHARACTERISTICS OF A BLURRY INJECTOR

2013 ◽  
Vol 23 (3) ◽  
pp. 193-209 ◽  
Author(s):  
Claudia Goncalves Azevedo ◽  
Jose Carlos de Andrade ◽  
Fernando de Souza Costa
Keyword(s):  
Nozzle Exit ◽  
Spray Characteristics

Disorganization of a hole tone feedback loop by an axisymmetric obstacle on a downstream end plate

2014 ◽  
Vol 757 ◽  
pp. 908-942 ◽  
Author(s):  
K. Matsuura ◽  
M. Nakano
Keyword(s):  
Nozzle Exit ◽  
Passive Control ◽  
Control Method ◽  
Three Dimensional ◽  
Acoustic Power ◽  
Shear Layers ◽  
Mean Velocity ◽  
End Plate ◽  
Air Jet ◽  
Practical Engineering

AbstractThis study investigates the suppression of the sound produced when a jet, issued from a circular nozzle or hole in a plate, goes through a similar hole in a second plate. The sound, known as a hole tone, is encountered in many practical engineering situations. The mean velocity of the air jet $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}u_0$ was $6\text {--}12\ \mathrm{m}\ {\mathrm{s}}^{-1}$. The nozzle and the end plate hole both had a diameter of 51 mm, and the impingement length $L_{im}$ between the nozzle and the end plate was 50–90 mm. We propose a novel passive control method of suppressing the tone with an axisymmetric obstacle on the end plate. We find that the effect of the obstacle is well described by the combination ($W/L_{im}$, $h$) where $W$ is the distance from the edge of the end plate hole to the inner wall of the obstacle, and $h$ is the obstacle height. The tone is suppressed when backflows from the obstacle affect the jet shear layers near the nozzle exit. We do a direct sound computation for a typical case where the tone is successfully suppressed. Axisymmetric uniformity observed in the uncontrolled case is broken almost completely in the controlled case. The destruction is maintained by the process in which three-dimensional vortices in the jet shear layers convect downstream, interact with the obstacle and recursively disturb the jet flow from the nozzle exit. While regions near the edge of the end plate hole are responsible for producing the sound in the controlled case as well as in the uncontrolled case, acoustic power in the controlled case is much lower than in the uncontrolled case because of the disorganized state.

scholarly journals Acoustic flow in porous media

2021 ◽  
Vol 920 ◽  
Author(s):  
Ofer Manor
Keyword(s):  
Porous Media ◽  
Flow In Porous Media ◽  
Acoustic Flow

Abstract

Influence of nozzle exit geometrical parameters on supersonic jet decay

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar ◽  
R. K. Mishra
Keyword(s):  
Aspect Ratio ◽  
Nozzle Exit ◽  
Ambient Air ◽  
Schlieren Image ◽  
Geometrical Parameters ◽  
Image Study ◽  
Aspect Ratios ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

Abstract Experiments and simulations were carried on C-D nozzles with four different exit geometry aspect ratios to investigate the impact of supersonic decay characteristics. Rectangular and elliptical exit geometries were considered for the study with various aspect ratios. Numerical simulations and Schlieren image study were studied and found the agreeable logical physics of decay and spread characteristics. The supersonic core decay was found to be of different length for different exit geometry aspect ratio, though the throat to exit area ratio was kept constant to maintain the same exit Mach number. The impact of nozzle exit aspect ratio geometry was responsible to enhance the mixing of primary flow with ambient air, without requiring a secondary method to increase the mixing characteristics. The higher aspect ratio resulted in better mixing when compared to lower aspect ratio exit geometry, which led to reduction in supersonic core length. The behavior of core length reduction gives the identical signature for both under-expanded and over-expanded cases. The results revealed that higher aspect ratio of the exit geometry produced smaller supersonic core length. The aspect ratio of cross section in divergent section of the nozzle was maintained constant from throat to exit to reduce flow losses.

scholarly journals Aspect Ratio Driven Relationship between Nozzle Internal Flow and Supersonic Jet Mixing

Aerospace ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 78
Author(s):  
Kalyani Bhide ◽  
Kiran Siddappaji ◽  
Shaaban Abdallah
Keyword(s):  
Boundary Layer ◽  
Aspect Ratio ◽  
Nozzle Exit ◽  
Supersonic Jet ◽  
Internal Flow ◽  
Shear Stresses ◽  
Loss Mechanism ◽  
Potential Core ◽  
Jet Mixing ◽  
Aspect Ratios

This work attempts to connect internal flow to the exit flow and supersonic jet mixing in rectangular nozzles with low to high aspect ratios (AR). A series of low and high aspect ratio rectangular nozzles (design Mach number = 1.5) with sharp throats are numerically investigated using steady state Reynolds-averaged Navier−Stokes (RANS) computational fluid dynamics (CFD) with k-omega shear stress transport (SST) turbulence model. The numerical shadowgraph reveals stronger shocks at low ARs which become weaker with increasing AR due to less flow turning at the throat. Stronger shocks cause more aggressive gradients in the boundary layer resulting in higher wall shear stresses at the throat for low ARs. The boundary layer becomes thick at low ARs creating more aerodynamic blockage. The boundary layer exiting the nozzle transforms into a shear layer and grows thicker in the high AR nozzle with a smaller potential core length. The variation in the boundary layer growth on the minor and major axis is explained and its growth downstream the throat has a significant role in nozzle exit flow characteristics. The loss mechanism throughout the flow is shown as the entropy generated due to viscous dissipation and accounts for supersonic jet mixing. Axis switching phenomenon is also addressed by analyzing the streamwise vorticity fields at various locations downstream from the nozzle exit.

Acoustic flow perception in cf-bats: Properties of the available cues

1999 ◽  
Vol 105 (5) ◽  
pp. 2958-2966 ◽  
Author(s):  
Rolf Müller ◽  
Hans-Ulrich Schnitzler
Keyword(s):  
Acoustic Flow
Sign in / Sign up

Export Citation Format

Share Document