Numerical study of supersonic boundary-layer modal stability for a slightly rarefied gas using Navier—Stokes approach

2021 ◽  
Vol 33 (11) ◽  
pp. 114107
Author(s):  
Jihui Ou ◽  
Jie Chen
Keyword(s):  
Boundary Layer ◽  
Rarefied Gas ◽  
Numerical Study ◽  
Supersonic Boundary Layer ◽  
Navier Stokes ◽  
Slightly Rarefied Gas

scholarly journals Numerical simulation on the development of periodic three-dimensional disturbances in a supersonic boundary layer

2019 ◽  
Vol 196 ◽  
pp. 00016
Author(s):  
Gleb Kolosov ◽  
Alexander Semenov ◽  
Alexey Yatskikh
Keyword(s):  
Boundary Layer ◽  
Mass Flow ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Small Diameter ◽  
Supersonic Boundary Layer ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Software Complex

The results of a numerical study of the development of periodic pulsations in a supersonic boundary layer on a flat plate are presented at a Mach number of 2.5 and a unit Reynolds number of 8×106 m–1. Using the software complex ANSYS, the complete Navier-Stokes equations were solved. Periodic mass flow disturbances with a frequency of 20 kHz were introduced into the boundary layer through a small-diameter hole on the surface of the model. Downstream the profiles of the longitudinal mass flow pulsations were recorded, and spectral analysis of the data was carried out. The main characteristics of the development of unstable disturbances in both physical and wave spaces are obtained.

Potential Flow Field Generated by Downstream Moving Bars and Propagated on a Turbine Blade at Low Reynolds Number

2011 ◽  
Author(s):  
Ve´ronique Penin ◽  
Pascale Kulisa ◽  
Franc¸ois Bario
Keyword(s):  
Boundary Layer ◽  
Large Scale ◽  
Numerical Study ◽  
Three Dimensional ◽  
Potential Effect ◽  
Navier Stokes ◽  
Turbine Cascade ◽  
Wake Interaction ◽  
Rotor Stator Interaction ◽  
The Stability

During the last few decades, the size and weight of turbo-machinery have been continuously reduced. However, by decreasing the distance between rows, rotor-stator interaction is strengthened. Two interactions now have the same magnitude: wake interaction and potential effect. Studying this effect is essential to understand rotor-stator interactions. Indeed, this phenomenon influences the whole flow, including the boundary layer of the upstream and downstream blades, ergo the stability of the flow and the efficiency of the machine. A large scale turbine cascade followed by a specially designed rotating cylinder system is used. Synchronised velocity LDA measurements on the vane profile show the flow and boundary layer behavior due to the moving bars. To help the general understanding and to corroborate our experimental results, numerical investigations are carried out with an unsteady three dimensional Navier-Stokes code. Moreover, the numerical study informs about the potential disturbance to the whole flow of the cascade.

Performance and Flow Characteristics of an Optimized Supercritical Compressor Stator Cascade

2005 ◽  
Vol 128 (3) ◽  
pp. 435-443 ◽  
Author(s):  
Bo Song ◽  
Wing F. Ng
Keyword(s):  
Boundary Layer ◽  
Numerical Study ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Flow Conditions ◽  
Supercritical Flow ◽  
Gradient Distribution ◽  
Controlled Diffusion ◽  
Mach Numbers

An experimental and numerical study was performed on an optimized compressor stator cascade designed to operate efficiently at high inlet Mach numbers (M1) ranging from 0.83 to 0.93 (higher supercritical flow conditions). Linear cascade tests confirmed that low losses and high turning were achieved at normal supercritical flow conditions (0.7<M1<0.8), as well as higher supercritical flow conditions (0.83<M1<0.93), both at design and off-design incidences. The performance of this optimized stator cascade is better than those reported in the literature based on Double Circular Arc (DCA) and Controlled Diffusion Airfoil (CDA) blades, where losses increase rapidly for M1>0.83. A two-dimensional (2D) Navier-Stokes solver was applied to the cascade to characterize the performance and flow behavior. Good agreement was obtained between the CFD and the experiment. Experimental loss characteristics, blade surface Mach numbers, shadowgraphs, along with CFD flowfield simulations, were presented to elucidate the flow physics. It is found that low losses are due to the well-controlled boundary layer, which is attributed to an optimum flow structure associated with the blade profile. The multishock pattern and the advantageous pressure gradient distribution on the blade are the key reasons of keeping the boundary layer from separating, which in turn accounts for the low losses at the higher supercritical flow conditions.

Characterization of coherent vortical structures in a supersonic turbulent boundary layer

2008 ◽  
Vol 613 ◽  
pp. 205-231 ◽  
Author(s):  
SERGIO PIROZZOLI ◽  
MATTEO BERNARDINI ◽  
FRANCESCO GRASSO
Keyword(s):  
Boundary Layer ◽  
Outer Layer ◽  
Stokes Equations ◽  
Supersonic Boundary Layer ◽  
Navier Stokes ◽  
Hairpin Vortices ◽  
Length Scales ◽  
Navier Stokes Equations ◽  
Vortical Structures

A spatially developing supersonic boundary layer at Mach 2 is analysed by means of direct numerical simulation of the compressible Navier--Stokes equations, with the objective of quantitatively characterizing the coherent vortical structures. The study shows structural similarities with the incompressible case. In particular, the inner layer is mainly populated by quasi-streamwise vortices, while in the outer layer we observe a large variety of structures, including hairpin vortices and hairpin packets. The characteristic properties of the educed structures are found to be nearly uniform throughout the outer layer, and to be weakly affected by the local vortex orientation. In the outer layer, typical core radii vary in the range of 5–6 dissipative length scales, and the associated circulation is approximately constant, and of the order of 180 wall units. The statistical properties of the vortical structures in the outer layer are similar to those of an ensemble of non-interacting closed-loop vortices with a nearly planar head inclined at an angle of approximately 20° with respect to the wall, and with an overall size of approximately 30 dissipative length scales.

scholarly journals Injection into boundary layers: solutions beyond the classical form

2017 ◽  
Vol 822 ◽  
pp. 617-639 ◽  
Author(s):  
R. E. Hewitt ◽  
P. W. Duck ◽  
A. J. Williams
Keyword(s):  
Boundary Layer ◽  
Numerical Study ◽  
Flow Direction ◽  
Three Dimensional ◽  
Boundary Region ◽  
Navier Stokes ◽  
Injection Velocity ◽  
Finite Width ◽  
Viscous Effects ◽  
New States

This theoretical and numerical study presents three-dimensional boundary-layer solutions for laminar incompressible flow adjacent to a semi-infinite flat plate, subject to a uniform free-stream speed and injection through the plate surface. The novelty in this case arises from a fully three-dimensional formulation, which also allows for slot injection over a spanwise length scale comparable to the boundary-layer thickness. This approach retains viscous effects in both the spanwise and transverse directions, and effectively results in a parabolised Navier–Stokes system (sometimes referred to as the ‘boundary-region equations’). Any injection profile can be described in this approach, but we restrict attention to three-dimensional states driven by a finite-width slot aligned with the flow direction and self-similar in their downstream development. The classical two-dimensional states are known to only exist up to a critical (‘blow off’) injection amplitude, but the three-dimensional solutions here appear possible for any injection velocity. These new states take the form of low-speed streamwise-aligned streaks whose geometry depends on the amplitude of injection and the spanwise width of the injection slot; intriguingly, although very low wall shear is typically obtained, streamwise flow reversal is not observed, however hard the blowing. Asymptotic descriptions are provided in the limit of increasing slot width and fixed injection velocity, which allow for classification of the solutions according to two bounding injection rates.

Sign in / Sign up

Export Citation Format

Share Document