Influence of Rogowski coil structure for sub-ns current pulses

2021 ◽  
Vol 92 (7) ◽  
pp. 073303
Author(s):  
V. Nassisi ◽  
A. Serra
Keyword(s):  
Rogowski Coil ◽  
Current Pulses ◽  
Coil Structure

scholarly journals Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger

2021 ◽  
pp. 42-46
Author(s):  
L. A. Ljutenko ◽  
V. M. Mikhailov
Keyword(s):  
Energy Storage ◽  
High Voltage ◽  
Discharge Current ◽  
High Probability ◽  
Rogowski Coil ◽  
Magnetic Pulse ◽  
Pressure Amplitude ◽  
Charge Voltage ◽  
Capacitive Energy Storage ◽  
Current Pulses

Purpose. An experimental verification of the existence of a range of values for the parameters of the capacitive energy storage of the magnetic-pulse installations with controlled vacuum discharger, in which, with a high probability, there is a «cut» of the discharge current pulses and the expansion of cylindrical thin-walled tubular workpieces using an external coil. Methodology. High voltage magnetic-pulse installation of NTU «KhPI» with controlled vacuum discharger, multiturn coil with inside dielectrical die and inside aluminum alloy workpiece are used. The capacitance and charge voltage of capacitive energy storage are changed. Discharge current pulses are measured by Rogowski coil and the oscillograph. Results. Parts of complicated shape are made by expansion of cylindrical tubular workpieces with help of external coil. Pressed metallic tubular part is removable from inner dielectric rod. Originality. The frequency of «cut» pulse is defined by negative magnetic field pressure amplitude. It is shown that we must coordinate this frequency and charge voltage with capacitive storage parameters by high probability of pulse «cut». Practical value. It is shown how to use installations with controlled vacuum dischargers in magnetic forming technology based on «cut» pulses.

Design of a Rogowski Coil with a Magnetic Core Used for Measurements of Nanosecond Current Pulses

2006 ◽  
Vol 8 (4) ◽  
pp. 457-460 ◽  
Author(s):  
Zhu Jundong ◽  
Zhang Qiaogen ◽  
Jia Jiangbo ◽  
Tao Fengbo ◽  
Yang Liandian ◽  
...  
Keyword(s):  
Magnetic Core ◽  
Rogowski Coil ◽  
Current Pulses

scholarly journals Very Fast Current Diagnostic for Linear Pulsed Beams

2018 ◽  
Vol 167 ◽  
pp. 02006
Author(s):  
Vincenzo Nassisi ◽  
Domenico Delle Side ◽  
Vito Turco
Keyword(s):  
Transmission Lines ◽  
Rise Time ◽  
Attenuation Factor ◽  
Rogowski Coil ◽  
Particle Accelerators ◽  
Load Impedance ◽  
Double Line ◽  
New Device ◽  
Current Pulses

Fast current pulses manage lasers and particle accelerators and require sophisticate systems to be detected. At today Rogowski coils are well known. They are designed and built with a toroidal structure. In recently application, flat transmission lines are imploded and for this reason we develop a linear Rogowski coil to detect current pulses inside flat conductors. To get deep information from the system, it was approached by means of the theory of the transmission lines. The coil we build presents a resistance but it doesn’t influence the rise time of the response, instead the integrating time. We also studied the influence of the magnetic properties of coil support. The new device was able to record pulses of more hundred nanoseconds depending on the inductance, load impedance and resistance of the coil. Furthermore, its response was characterized by a sub-nanosecond rise time (~100 ps), The attenuation coefficient depends mainly on the turn number of the coil, while the quality of the response depends both on the manufacture quality of the coil and on the magnetic core characteristics. In biophysical applications often, a double line is employed in order to have a sample as control and a sample stressed by a light source. So, in this case we build two equal plane lines by 100 Ω characteristic resistance connected in parallel. We diagnosed the current present in a line. The attenuation factor resulted to be 11,5 A/V.

scholarly journals Using a Current Shunt for the Purpose of High-Current Pulse Measurement

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1835
Author(s):  
Pawel Piekielny ◽  
Andrzej Waindok
Keyword(s):  
Mathematical Model ◽  
Power Supply ◽  
Rogowski Coil ◽  
High Current ◽  
Shunt Resistance ◽  
Software Comparison ◽  
Current Pulses ◽  
Measurement Results ◽  
The Mathematical Model ◽  
A Current

Measurement of high-current pulses is crucial in some special applications, e.g., electrodynamic accelerators (EA) and converters. In such cases, the current shunts have limitations concerning the frequency bandwidth. To overcome the problem, a method based on the shunt mathematical model is proposed. In the method, the solution of ordinary differential equations for the RL circuit is carried out in order to obtain the real current shape. To check the method, as a referee, a Rogowski coil dedicated to measuring high-current pulses was used. Additionally, the measurement results were compared with the mathematical model of the tested power supply system. Measurements were made for the short power supply circuit, which allows eliminating the nonlinearity. The calculations were carried out using a circuit model. In order to obtain the parameters of the shunt (resistance and inductance), it was modeled using an ANSYS/Q3D Extractor software. Comparison of calculation and measurement results confirms the correctness of our method. In order to compare results, the normalized root mean square error (NRMSE) was used.

Error analysis of PCB Rogowski coil

2011 ◽  
Vol 25 (1) ◽  
pp. 50-55
Author(s):  
Na Wang ◽  
Quan Wan
Keyword(s):  
Error Analysis ◽  
Rogowski Coil

scholarly journals Research on Small Square PCB Rogowski Coil Measuring Transient Current in the Power Electronics Devices

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4176 ◽  
Author(s):  
Chaoqun Jiao ◽  
Juan Zhang ◽  
Zhibin Zhao ◽  
Zuoming Zhang ◽  
Yuanliang Fan
Keyword(s):  
Power Electronics ◽  
Printed Circuit Board ◽  
Electronic Devices ◽  
Rogowski Coil ◽  
Bipolar Transistors ◽  
Circuit Board ◽  
Power Electronic ◽  
Insulated Gate Bipolar Transistors ◽  
Printed Circuit ◽  
Internal Structures

With the development of China’s electric power, power electronics devices such as insulated-gate bipolar transistors (IGBTs) have been widely used in the field of high voltages and large currents. However, the currents in these power electronic devices are transient. For example, the uneven currents and internal chip currents overshoot, which may occur when turning on and off, and could have a great impact on the device. In order to study the reliability of these power electronics devices, this paper proposes a miniature printed circuit board (PCB) Rogowski coil that measures the current of these power electronics devices without changing their internal structures, which provides a reference for the subsequent reliability of their designs.

Prepotentials and unidirectional propagation in myocardium

1961 ◽  
Vol 201 (5) ◽  
pp. 873-880 ◽  
Author(s):  
T. Hoshiko ◽  
Nick Sperelakis
Keyword(s):  
Current Flow ◽  
Reverse Direction ◽  
Sartorius Muscle ◽  
Potential Response ◽  
Ringer’S Solution ◽  
Current Pulses ◽  
Negative Current ◽  
Reversed Polarity ◽  
Bidirectional Propagation ◽  
Frog Sartorius

In frog ventricular strips bathed in Ca-free Ringer's solution containing 6–30 mm/liter Mg and treated with conditioning current pulses, propagation became impaired. An exaggerated foot, or prepotential, was consistently more prominent when the conditioned strip was stimulated from one end than from the other. Occasionally a prepotential in isolation alternated with a prepotential plus action potential response. After further treatment with current pulses, propagation failed in the direction of negative current flow. Thresholds of impaled cells were identical. Bidirectional propagation was restored in Ringer's solution. Conditioning pulses of reversed polarity induced unidirectional propagation in the reverse direction. Propagation in frog sartorius muscle was not blocked under similar conditions. Prepotentials and unidirectional propagation may be explained by junctional transmission from cell to cell.

scholarly journals Theoretical Analysis and Design of an Innovative Coil Structure for Transcranial Magnetic Stimulation

2021 ◽  
Vol 11 (4) ◽  
pp. 1960
Author(s):  
Naming Zhang ◽  
Ziang Wang ◽  
Jinhua Shi ◽  
Shuya Ning ◽  
Yukuo Zhang ◽  
...  
Keyword(s):  
Electromagnetic Field ◽  
Transcranial Magnetic Stimulation ◽  
Theoretical Analysis ◽  
Numerical Simulations ◽  
Magnetic Stimulation ◽  
Influential Factors ◽  
Intersection Angle ◽  
Electromagnetic Field Distribution ◽  
Analysis And Design ◽  
Coil Structure

Previous research showed that pulsed functional magnetic stimulation can activate brain tissue with optimum intensity and frequency. Conventional stimulation coils are always set as a figure-8 type or Helmholtz. However, the magnetic fields generated by these coils are uniform around the target, and their magnetic stimulation performance still needs improvement. In this paper, a novel type of stimulation coil is proposed to shrink the irritative zone and strengthen the stimulation intensity. Furthermore, the electromagnetic field distribution is calculated and measured. Based on numerical simulations, the proposed coil is compared to traditional coil types. Moreover, the influential factors, such as the diameter and the intersection angle, are also analyzed. It was demonstrated that the proposed coil has a better performance in comparison with the figure-8 coil. Thus, this work suggests a new way to design stimulation coils for transcranial magnetic stimulation.

Sign in / Sign up

Export Citation Format

Share Document