Comparison of the characteristics of the laboratory model of a anode layer thruster operating with krypton and xenon

2021 ◽  
Author(s):  
D. V. Dukhopelnikov ◽  
S. O. Shilov ◽  
D. K. Alekseev
Keyword(s):  
Laboratory Model ◽  
Anode Layer

Investigation of the laboratory model of a thruster with anode layer operating with air and nitrogen-oxygen mixture

2021 ◽  
Author(s):  
D. V. Dukhopelnikov ◽  
V. A. Riazanov ◽  
S. O. Shilov ◽  
D. S. Manegin ◽  
R. A. Sokolov
Keyword(s):  
Oxygen Mixture ◽  
Laboratory Model ◽  
Anode Layer

Neural Mechanisms Underlying Hypoarousal-Related Abnormal Aggression in a Laboratory Model

2008 ◽  
Author(s):  
Eva Mikics ◽  
Jozsef Halasz ◽  
Mate Toth ◽  
Menno R. Kruk ◽  
Jozsef Haller
Keyword(s):  
Neural Mechanisms ◽  
Laboratory Model

Continuous Precipitation of Lead Iodide

1994 ◽  
Vol 59 (7) ◽  
pp. 1503-1510
Author(s):  
Stanislav Žáček ◽  
Jaroslav Nývlt
Keyword(s):  
Growth Rate ◽  
Particle Size ◽  
Crystal Size ◽  
Crystal Growth Rate ◽  
Laboratory Model ◽  
Lead Iodide ◽  
Secondary Nucleation ◽  
Equimolar Ratio ◽  
Continuous Precipitation ◽  
The Mean

Lead iodide was precipitated from aqueous solutions of 0.015 - 0.1 M Pb(NO3)2 and 0.03 - 0.2 M KI in the equimolar ratio using a laboratory model of a stirred continuous crystallizer at 22 °C. After reaching the steady state, the PbI2 crystal size distribution was measured sedimentometrically and the crystallization kinetics was evaluated based on the mean particle size. Both the linear crystal growth rate and the nucleation rate depend on the specific output of the crystallizer. The system crystallization constant either points to a significant effect of secondary nucleation by the mechanism of contact of the crystals with the stirrer blade, or depends on the concentrations of the components added due to the micromixing mechanism.

scholarly journals Bridge Damage Detection Approach Using a Roving Camera Technique

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1246 ◽  
Author(s):  
Darragh Lydon ◽  
Myra Lydon ◽  
Rolands Kromanis ◽  
Chuan-Zhi Dong ◽  
Necati Catbas ◽  
...  
Keyword(s):  
Low Cost ◽  
Normal Operation ◽  
Laboratory Model ◽  
Traffic Patterns ◽  
Operational Conditions ◽  
Bridge Model ◽  
Detection Approach ◽  
Bridge Damage ◽  
Computer Vision Technology ◽  
Climate Events

Increasing extreme climate events, intensifying traffic patterns and long-term underinvestment have led to the escalated deterioration of bridges within our road and rail transport networks. Structural Health Monitoring (SHM) systems provide a means of objectively capturing and quantifying deterioration under operational conditions. Computer vision technology has gained considerable attention in the field of SHM due to its ability to obtain displacement data using non-contact methods at long distances. Additionally, it provides a low cost, rapid instrumentation solution with low interference to the normal operation of structures. However, even in the case of a medium span bridge, the need for many cameras to capture the global response can be cost-prohibitive. This research proposes a roving camera technique to capture a complete derivation of the response of a laboratory model bridge under live loading, in order to identify bridge damage. Displacement is identified as a suitable damage indicator, and two methods are used to assess the magnitude of the change in global displacement under changing boundary conditions in the laboratory bridge model. From this study, it is established that either approach could detect damage in the simulation model, providing an SHM solution that negates the requirement for complex sensor installations.

scholarly journals New Sensor for Medium- and High-Voltage Measurement

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4654
Author(s):  
Andrzej Wetula ◽  
Andrzej Bień ◽  
Mrunal Parekh
Keyword(s):  
Finite Element Method ◽  
Electronic Devices ◽  
Finite Element Method Simulation ◽  
Laboratory Model ◽  
Power Electronic ◽  
Proof Of Concept ◽  
Voltage Measurement ◽  
Medium Voltage ◽  
Narrow Frequency Band ◽  
Further Development

Measurements of medium and high voltages in a power grid are normally performed with large and bulky voltage transformers or capacitive dividers. Besides installation problems, these devices operate in a relatively narrow frequency band, which limits their usability in modern systems that are saturated with power electronic devices. A sensor that can be installed directly on a wire and can operate without a galvanic connection to the ground may be used as an alternative voltage measurement device. This type of voltage sensor can complement current sensors installed on a wire, forming a complete power acquisition system. This paper presents such a sensor. Our sensor is built using two dielectric elements with different permeability coefficients. A finite element method simulation is used to estimate the parameters of a constructed sensor. Besides simulations, a laboratory model of a sensor was built and tested in a medium-voltage substation. Our results provide a proof of concept for the presented sensor. Some errors in voltage reconstruction have been traced to an oversimplified data acquisition and transmission system, which has to be improved during the further development of the sensor.

Sign in / Sign up

Export Citation Format

Share Document