Numerical analysis on enhancement of recirculation in porous medium to improve heat transfer rate

2020 ◽  
Author(s):  
Siddhartha Gollamudi ◽  
Dineshkumar L.
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Numerical Analysis ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Improve Heat Transfer

Mixed Convective Heat Transfer From a Heated Horizontal Plate in a Porous Medium Near an Impermeable Surface

1988 ◽  
Vol 110 (2) ◽  
pp. 390-394 ◽  
Author(s):  
P. H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Saturated Porous Medium ◽  
Forced Flow ◽  
Horizontal Plate ◽  
Flowing Fluid ◽  
Buoyancy Forces ◽  
Two Dimensional Flow

Two-dimensional flow over a horizontal plate in a saturated porous medium mounted near an impervious adiabatic horizontal surface and subjected to a horizontal forced flow has been numerically investigated. The plate is heated to a uniform temperature that is higher than the temperature of the flowing fluid. The conditions considered are such that the buoyancy forces have an effect on the flow and, therefore, on the heat transfer rate from the plate. The full governing equations, written in dimensionless form, have been solved for a range of values of the governing parameters using the finite element method. The heat transfer rate from the plate is influenced both by the dimensionless depth of the plate below the surface and the importance of the buoyancy forces, the latter having been characterized by a parameter which is equal to the ratio of the Darcy–Rayleigh number to Peclet number. The conditions under which these parameters have a negligible effect on the heat transfer rate are discussed.

scholarly journals A Numerical Simulation Study to Improve Heat Transfer Rate in a Double Pipe Heat Exchanger using Different ways.

2021 ◽  
Vol 1973 (1) ◽  
pp. 012113
Author(s):  
Zomorrod Ahmed Salman ◽  
Zena Khalefa Kadhim ◽  
Kamil Abdulhussein khalaf ◽  
Hassanein Ali Kamil
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Exchanger ◽  
Heat Transfer Rate ◽  
Simulation Study ◽  
Transfer Rate ◽  
Improve Heat Transfer ◽  
Double Pipe ◽  
Pipe Heat

Biomechanics of Surface Runoff and Soil Water Percolation

2020 ◽  
Vol 401 ◽  
pp. 36-46
Author(s):  
James Makol Madut Deng ◽  
Oluwole Daniel Makinde
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Soil Water ◽  
Heat Transfer Rate ◽  
Surface Runoff ◽  
Transfer Rate ◽  
Soil Surface ◽  
Biophysical Parameters ◽  
Two Phase ◽  
Soil Water Transport

In this study, the complex interaction of surface runoff with the biomechanics of soil water transport and heat transfer rate is theoretically investigated using a mathematical model that relies on the two phase flows of an incompressible Newtonian fluid (stormwater) within the soil (porous medium) and on the soil surface (runoff). The flow and heat transfer characteristics within the soil are determined numerically based on Darcy-Brinkman-Forchheimer model for porous medium coupled with the appropriate energy equation while analytical approach is employed to tackle the model for interacting surface runoff stormwater. The effects of various embedded biophysical parameters on the temperature distribution and stormwater transport within the soil and across the soil surface together with soil-runoff interface skin friction and Nusselt number are display graphically and discussed quantitatively. It is found that an increase in surface runoff over tightly packed soil lessens stormwater percolation rate but enhances both soil erosion and surface heat transfer rate.

Buoyancy-Induced Convection in Metal Foam and Finned Metal Foam Heat Sinks©

2000 ◽  
Author(s):  
A. Bhattacharya ◽  
Roop L. Mahajan
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Metal Foam ◽  
Metal Foams ◽  
Experimental Results ◽  
Heat Sinks ◽  
Normal Metal ◽  
Optimum Number

Abstract In this paper, we present our recent experimental results on buoyancy induced convection in metal foams of different pore densities (corresponding to 5, 10, 20 and 40 pores per inch) and porosities (0.89–0.96). The results show that compared to a hot surface facing up, the heat transfer coefficients in these heat sinks are 5 to 6 times higher. However, when compared to commercially available heat sinks of similar dimensions, the enhancement is found to be marginal. The experimental results also show that for a given pore size, the heat transfer rate increases with porosity suggesting the dominant role played by conduction in enhancing heat transfer. On the other hand, if the porosity is held constant, the heat transfer rate is found to be lower at higher pore densities. This can be attributed to the higher permeability with the larger pores, which allows higher entrainment of air through the porous medium. An empirical correlation, developed for the estimation of Nusselt number in terms of Rayleigh and Darcy numbers, is found to be in good agreement with the experimental data with a maximum error of 10%. We also report our results on novel finned metal foam heat sinks© in natural convection. Experiments were conducted on aluminum foams of 90% porosity with 5 and 20 PPI (pores per inch) with one, two, and four aluminum fins inserted in the foam. All these heat sinks were fabricated in-house. The results show that the finned metal foam heat sinks© are superior in thermal performance compared to the normal metal foam and conventional finned heat sinks. The heat transfer increases with increase in the number of fins. However, the relative enhancement is found to decrease with each additional fin. The indication is that there exists an optimum number of fins beyond which the enhancement in heat transfer due to increased surface area is offset by the retarding effect of overlapping thermal boundary layers. Similar to normal metal foams, the 5 PPI samples are found to give higher values of the heat transfer coefficient compared to the 20 PPI samples due to higher permeability of the porous medium. Future work is planned to arrive at the optimal heat sink configuration for even larger enhancement in heat transfer.

Sign in / Sign up

Export Citation Format

Share Document