Research on production prediction methods of oil wells in the same oil well

2020 ◽  
Author(s):  
Chen Yang
Keyword(s):  
Oil Wells ◽  
Prediction Methods ◽  
Oil Well ◽  
Production Prediction

Paraffin Depositing Mechanism and Prediction Methods of Paraffin Removal Cycle

2014 ◽  
Vol 675-677 ◽  
pp. 1512-1516 ◽  
Author(s):  
Li Jun Wang ◽  
Wei Wang
Keyword(s):  
Temperature Distribution ◽  
Laminar Flow ◽  
Calculation Method ◽  
Flow Model ◽  
Oil Wells ◽  
Prediction Methods ◽  
Oil Well ◽  
Quantitative Calculation ◽  
Quantitative Basis ◽  
Laminar Flow Model

This paper explains the mechanism of oil well paraffin deposit. The paraffin deposit velocity has a closed relationship with the temperature distribution of the well, the production of the well , and the roughness of pipe. This paper quantitatively calculates the speed of paraffin deposit of oil wells on the basis of certain assumptions, deduces the quantitative calculation method of paraffin removal cycle based on laminar flow model and provides a quantitative basis for determining the oil well paraffin removal cycle on time.

A Superior Shale Oil EOR Method for the Permian Basin

2021 ◽  
Author(s):  
Robert Downey ◽  
Kiran Venepalli ◽  
Jim Erdle ◽  
Morgan Whitelock
Keyword(s):  
Oil Recovery ◽  
Reservoir Simulation ◽  
Simulation Modeling ◽  
Lower Cost ◽  
Oil Production ◽  
Oil Wells ◽  
Oil Well ◽  
Shale Oil ◽  
Permian Basin ◽  
Artificial Lift

Abstract The Permian Basin of west Texas is the largest and most prolific shale oil producing basin in the United States. Oil production from horizontal shale oil wells in the Permian Basin has grown from 5,000 BOPD in February, 2009 to 3.5 Million BOPD as of October, 2020, with 29,000 horizontal shale oil wells in production. The primary target for this horizontal shale oil development is the Wolfcamp shale. Oil production from these wells is characterized by high initial rates and steep declines. A few producers have begun testing EOR processes, specifically natural gas cyclic injection, or "Huff and Puff", with little information provided to date. Our objective is to introduce a novel EOR process that can greatly increase the production and recovery of oil from shale oil reservoirs, while reducing the cost per barrel of recovered oil. A superior shale oil EOR method is proposed that utilizes a triplex pump to inject a solvent liquid into the shale oil reservoir, and an efficient method to recover the injectant at the surface, for storage and reinjection. The process is designed and integrated during operation using compositional reservoir simulation in order to optimize oil recovery. Compositional simulation modeling of a Wolfcamp D horizontal producing oil well was conducted to obtain a history match on oil, gas, and water production. The matched model was then utilized to evaluate the shale oil EOR method under a variety of operating conditions. The modeling indicates that for this particular well, incremental oil production of 500% over primary EUR may be achieved in the first five years of EOR operation, and more than 700% over primary EUR after 10 years. The method, which is patented, has numerous advantages over cyclic gas injection, such as much greater oil recovery, much better economics/lower cost per barrel, lower risk of interwell communication, use of far less horsepower and fuel, shorter injection time, longer production time, smaller injection volumes, scalability, faster implementation, precludes the need for artificial lift, elimination of the need to buy and sell injectant during each cycle, ability to optimize each cycle by integration with compositional reservoir simulation modeling, and lower emissions. This superior shale oil EOR method has been modeled in the five major US shale oil plays, indicating large incremental oil recovery potential. The method is now being field tested to confirm reservoir simulation modeling projections. If implemented early in the life of a shale oil well, its application can slow the production decline rate, recover far more oil earlier and at lower cost, and extend the life of the well by several years, while precluding the need for artificial lift.

Carbon Dioxide Corrosion and Corrosion Prevention of Oil Well Cement Paste Matrix in Deep Wells

2014 ◽  
Vol 692 ◽  
pp. 433-438 ◽  
Author(s):  
Jing Fu Zhang ◽  
Jin Long Yang ◽  
Kai Liu ◽  
Bo Wang ◽  
Rui Xue Hou
Keyword(s):  
Carbon Dioxide ◽  
Compressive Strength ◽  
Cement Paste ◽  
Oil Wells ◽  
Oil Well ◽  
Cement Slurry ◽  
Corrosion Prevention ◽  
Oil Well Cement ◽  
Oil Well Cement Paste ◽  
Well Cement

Carbon dioxide CO2could corrode the oil well cement paste matrix under agreeable moisture and pressure condition in deep oil wells, which could decrease the compressive strength and damage the annular seal reliability of cement paste matrix. The problem of oil well cement paste matrix corrosion by CO2was researched in the paper for obtain the feasible corrosion prevention technical measures. The microstructure and compressive strength of corroded cement paste matrix were examined by scanning electron microscopeSEMand strength test instrument etc. under different corrosion conditions. The mechanism and effect law of corrosion on oil well cement paste matrix by CO2were analyzed. And the suitable method to protect CO2corrosion in deep oil wells was explored. The results show that the corrosion mechanism of cement paste matrix by CO2was that the wetting phase CO2could generate chemical reaction with original hydration products produced from cement hydration, which CaCO3were developed and the original composition and microstructure of cement paste matrix were destroyed. The compressive strength of corrosion cement paste matrix always was lower than that of un-corrosion cement paste matrix. The compressive strength of corrosion cement paste matrix decreased with increase of curing temperature and differential pressure. The corroded degree of cement paste matrix was intimately related with the compositions of cement slurry. Developing and design anti-corrosive cement slurry should base on effectively improving the compact degree and original strength of cement paste matrix. The compounding additive R designed in the paper could effectively improve the anti-corrosive ability of cement slurry.

scholarly journals QUANTITATIVE HISTOCHEMICAL ANALYSIS OF GLYCOLYTIC INTERMEDIATES AND COFACTORS WITH AN OIL WELL TECHNIQUE

1968 ◽  
Vol 16 (1) ◽  
pp. 29-39 ◽  
Author(s):  
F. M. MATSCHINSKY ◽  
J. V. PASSONNEAU ◽  
O. H. LOWRY
Keyword(s):  
Adenosine Triphosphate ◽  
Inorganic Phosphate ◽  
Dry Weight ◽  
Oil Wells ◽  
Oil Well ◽  
Histochemical Analysis ◽  
General Technique ◽  
Enzymatic Cycling ◽  
Glycolytic Intermediates

Quantitative histochemical measurements of glycolytic intermediates and cofactors in samples of the order of 0.1 µg dry weight have been made possible by the use of enzymatic fluorometric methods in combination with the technique of enzymatic cycling. In order to prevent evaporation of the necessarily small volumes of fluid and to avoid exposure to CO2 in the air, incubations are carried out under oil in wells drilled in Teflon. The general technique for conducting analyses in oil wells is described together with specific procedures for measuring glycogen, glucose, glucose 6-phosphate, uridine diphosphoglucose, fructose diphosphate, lactate, adenosine triphosphate, phosphocreatine and inorganic phosphate. The potential of the technique is illustrated by measurements of these compounds in each of nine discrete layers of the retina.

Calculation of Load and Stroke in Oil-Well Pump Rods

1943 ◽  
Vol 10 (1) ◽  
pp. A1-A12
Author(s):  
B. F. Langer ◽  
E. H. Lamberger
Keyword(s):  
Longitudinal Vibration ◽  
Oil Wells ◽  
Oil Well ◽  
Test Results ◽  
Sucker Rod ◽  
Sucker Rod Pump ◽  
Polished Rod

Abstract The sucker-rod pump as used in oil wells is treated as a problem in the longitudinal vibration of bars. Solutions are obtained for the forces and motions at both ends of the rod string, thus giving formulas for the calculation of polished-rod load and plunger travel. The results of the calculations are compared with test results.

Condition Monitoring of Equipment in Oil Wells using Deep Learning

2020 ◽  
Vol 12 (01) ◽  
pp. 2050001
Author(s):  
Yadigar N. Imamverdiyev ◽  
Fargana J. Abdullayeva
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Time Series Data ◽  
Short Term Memory ◽  
Single Layer ◽  
Oil Wells ◽  
Fault Prediction ◽  
Series Data ◽  
Oil Well ◽  
Data Set

In this paper, a fault prediction method for oil well equipment based on the analysis of time series data obtained from multiple sensors is proposed. The proposed method is based on deep learning (DL). For this purpose, comparative analysis of single-layer long short-term memory (LSTM) with the convolutional neural network (CNN) and stacked LSTM methods is provided. To demonstrate the efficacy of the proposed method, some experiments are conducted on the real data set obtained from eight sensors installed in oil wells. In this paper, compared to the single-layer LSTM model, the CNN and stacked LSTM predicted the faulty time series with a minimal loss.

scholarly journals Electrical Submersible Pump Design in Vertical Oil Wells

2020 ◽  
Vol 4 (4) ◽  
pp. 1-7
Author(s):  
Gomaa S
Keyword(s):  
Oil Wells ◽  
Maintenance Cost ◽  
Oil Well ◽  
Submersible Pump ◽  
Reservoir Properties ◽  
Pump Design ◽  
Artificial Lift ◽  
Complete Study ◽  
Electrical Submersible Pump

Artificial Lift is a very essential tool to increase the oil production rate or lift the oil column in the wellbore up to the surface. Artificial lift is the key in case of bottom hole pressure is not sufficient to produce oil from the reservoir to the surface. So, a complete study is carried to select the suitable type of artificial lift according to the reservoir and wellbore conditions like water production, sand production, solution gas-oil ratio, and surface area available at the surface. Besides, the maintenance cost and volume of produced oil have an essential part in the selection of the type of artificial lift tool. Artificial lift tools have several types such as Sucker Rod Pump, Gas Lift, Hydraulic Pump, Progressive Cavity Pump, Jet Pump, and Electrical Submersible Pump. All these types require specific conditions for subsurface and surface parameters to apply in oil wells. This paper will study the Electrical Submersible Pump “ESP” which is considered one of the most familiar types of artificial lifts in the whole world. Electrical Submersible Pump “ESP” is the most widely used for huge oil volumes. In contrast, ESP has high maintenance and workover cost. Finally, this paper will discuss a case study for the Electrical Submersible pump “ESP” design in an oil well. This case study includes the entire well and reservoir properties involving fluid properties to be applied using Prosper software. The results of the design model will impact oil productivity and future performance of oil well.

scholarly journals Oil Well Testing Using Production Logging Tool in Khurmala field in Kurdistan Region-Iraq

2019 ◽  
Vol 3 (2) ◽  
pp. 41-51
Author(s):  
Maha Hamoudi ◽  
Akram Humoodi ◽  
Bashdar Mohammed
Keyword(s):  
Saturation Pressure ◽  
Water Entry ◽  
Oil Wells ◽  
Oil Field ◽  
Oil Well ◽  
Well Testing ◽  
Kurdistan Region ◽  
Injection Wells ◽  
Study Results ◽  
Entry Points

Production logging tools (PLTs) in oil and gas industries are used for obtaining fluid types and measuring fluid rates in the borehole for both production and injection wells and to better understand the well productivity or the well injectivity of the interest zones. Additionally, it can be used to detect well problems, such as early water or gas breakthrough, channeling behind casing or tubing, and water or gas coning. The Khurmala field is a big oil field in the Kurdistan region of Iraq. PLTs have been acquired in many of the Khurmala oil wells, and the log records took into consideration the production technique decisions. In this study, results of the PLT log will be discussed in one of the Khurmala oil wells. Owing to the long history of production of oil or gas wells, many problems have been seen, such as coning either water or gas, formation damage, casing corrosion, and well obstruct. This research will evaluate the production profile across the slotted liner interval of (W1) well in the Khurmala oil field in the Iraq-Kurdistan region and detect possible water entry points, verify the distribution and nature of fluids, and estimate fluid segregation after the shut-in period. This was done by applying PLTs and interpreting the data by using Emeraude software. The performance of each choke size was studied and assessed. It was found that a choke size of 48/64̎gives the best favorable production gas, oil ratio, and profile. Results from the PL survey showed that no water entry was detected across the logged interval. All the water was coming from below a depth of 990 m; most of the hydrocarbons were coming from the slotted interval across 981.8-982.9 m, and the flowing pressure across the logged interval using maximum choke was less than the saturation pressure.

Sign in / Sign up

Export Citation Format

Share Document