Ballistic performance test of multiple reinforcements composite armor vest

2018 ◽  
Author(s):  
Sutikno ◽  
Wira Ashari ◽  
Ridho Azhari
Keyword(s):  
Performance Test ◽  
Ballistic Performance ◽  
Composite Armor

Effect of Al alloy back panel on the dynamic penetration and damage characteristics of ceramic composite armors

2019 ◽  
Vol 9 (7) ◽  
pp. 723-731
Author(s):  
Weilan Liu ◽  
Zhou Chen ◽  
Tengzhou Xu ◽  
Junfeng Hu ◽  
Jiaduo Li
Keyword(s):  
Ceramic Composite ◽  
Composite Layer ◽  
Al Alloy ◽  
Ballistic Performance ◽  
Damage Characteristics ◽  
Composite Armor ◽  
Back Panel ◽  
Dynamic Penetration ◽  
Ceramic Composite Armor ◽  
Hybrid Ceramic

This paper mainly focuses on the investigation of dynamic penetration and damage characteristics of a hybrid ceramic composite armor normally impacted by 12.7 mm armor piercing incendiary projectiles. The hybrid ceramic composite armor was composed of a ceramic cylinder layer, a Ti–6Al–4V plate, an ultrahigh molecular weight polyethylene (UHMWPE) composite layer, and an Al alloy panel. Three different areal densities of composite laminates with 82, 87, and 92 kg/m2 were tested. 3D finite element model of the ceramic composite armor was generated in ABAQUS, and the simulation results were employed to study the damage evolution. The effect of alumina ceramic cylinders layer on the ballistic performance and the failure mechanisms of Ti–6Al–4V and UHMWPE after ballistic impact were examined by experimental and simulative results. According to the numerical and analytical models, an optimal thickness range of Al alloy back panel was found in minimizing areal density of the ceramic composite armor.

A new approach for improving ballistic performance of composite armor

1999 ◽  
Vol 39 (2) ◽  
pp. 103-110 ◽  
Author(s):  
V. Parameswaran ◽  
W. Bentley ◽  
A. Shukla ◽  
R. A. Prosser
Keyword(s):  
Ballistic Performance ◽  
New Approach ◽  
Composite Armor

scholarly journals Preparation and Impact Resistance Properties of Hybrid Silicone-Ceramics Composites

2020 ◽  
Vol 10 (24) ◽  
pp. 9098
Author(s):  
Katarzyna Kośla ◽  
Paweł Kubiak ◽  
Marzena Fejdyś ◽  
Karolina Olszewska ◽  
Marcin Łandwijt ◽  
...  
Keyword(s):  
Impact Resistance ◽  
Young Modulus ◽  
Drop Tower ◽  
Body Armor ◽  
Soft Body ◽  
Ballistic Performance ◽  
Composite Armor ◽  
New Type ◽  
The Impact ◽  
Soft Body Armor

This article presents the method of preparation a new type of ballistic armor based on hybrid silicone-ceramic (HSC) composites with considerable flexibility. An experimental study on the ballistic behavior of HSC composites connected with soft body armor is presented against FSP.22 fragments. The effect of Al2O3 ceramics on the ballistic performance of HSC composite was investigated, and the fragmentation resistance process of the composite armor combining the HSC composite and soft aramid insert is clarified. Furthermore, impact resistance tests made with a drop tower which allows for a gravity drop of a mass along vertical guides onto a sample placed with an energy of 5 J were performed. The results presented in this paper show that the HSC composites can be successfully used as a hard body armor. However, they do not exhibit the properties of absorbing the impact energy generated during the drop tower tests. The test results show that the ballistic performance of composite armors is influenced by the hardness and Young modulus of ceramics and soft body armor panel. Additionally, in the article, the results of mechanical properties of silicones used for preparation of composites were presented and compiled to determine their role in the performance of impact protection.

Ballistic performance of powder metal Al5Cu-B4C composite as monolithic and laminated armor

2021 ◽  
Vol 63 (6) ◽  
pp. 512-518
Author(s):  
Mehmet Ayvaz ◽  
Hakan Cetinel
Keyword(s):  
Laminated Composite ◽  
Liquid Phase Sintering ◽  
Powder Metallurgy Method ◽  
Metal Composite ◽  
Ceramic Plate ◽  
Pressing Pressure ◽  
Powder Metal ◽  
Ballistic Performance ◽  
Composite Armor ◽  
Ballistic Tests

Abstract In this study, ballistic performances of x wt.-% B4C (x = 5, 10, and 20) reinforced Al5Cu matrix composite samples were investigated as a monolithic and laminated composite armor component. Composite armor plates were produced by the powder metallurgy method. The prepared powders were pressed under 400 MPa pressing pressure. Green compacts were pre-sintered at 400 °C for 30 minutes in order to blow the lubricant. Subsequently, liquid phase sintering was performed at 610 °C for 210 minutes. In ballistic tests, 7.62 mm caliber armor-piercing bullets were used as the ballistic threat. In the ballistic tests of monolithic armors, only 10 mm thick powder metal composite plates were tested. In the ballistic tests of laminated composite armors, these powdered metal plates were layered with 10 mm thick alumina ceramic plate front layers and 10 mm thick AA5083 plates. Although all of the monolithic powder metal composite armors were penetrated, they showed multi-hit capability. All of the laminated composite armors provided full ballistic protection. It was determined that with the increase in B4C reinforcement rate, the ballistic resistance also increased due to the improvement in strength, hardness, and abrasive feature.

Ballistic Performance of Sandwich Composite Armor System

2020 ◽  
Author(s):  
Shah Alam ◽  
Samhith Shakar
Keyword(s):  
Impact Resistance ◽  
Absorption Capacity ◽  
Sandwich Composite ◽  
Skin Thickness ◽  
Ballistic Performance ◽  
Backing Plate ◽  
Composite Armor ◽  
Corrugated Structure ◽  
The Impact ◽  
Armor System

Abstract This study focused on the design, modelling and the analysis of the dynamic response of composite armor system, constructed with Kevlar 29 as front skin, Alumina-ceramic filled in x shaped corrugated structure as core and bottom skin Kevlar 29 and T800S, in terms of residual velocity, energy absorption capacity and limiting velocity. The core cell size, height, thickness, skin thickness, etc., will be varied to get their influence on the impact resistance. The design parameter will be investigated for the sandwich composite armor with various configurations and stacking sequence of Alumina Ceramics, Kevlar 29 and T800S. The sandwich typically consists of front plate, core and backing plate, which will be impacted at different velocities starting at 100m/s till significant armor penetration. The ballistic limit velocity (V50) will be determined from the analysis. The non-linear explicit dynamic analysis and simulation results computed using the software ABAQUS will be validated by experiment. From the data obtained it can be suggested which composite armor has improved impact resistance and performance.

scholarly journals Effect of the Layer Sequence on the Ballistic Performance and Failure Mechanism of Ti6Al4V/CP-Ti Laminated Composite Armor

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3886
Author(s):  
Hong Yu ◽  
Qunbo Fan ◽  
Xinjie Zhu
Keyword(s):  
Stress Distribution ◽  
Failure Mechanism ◽  
Energy Absorption ◽  
Composite Plate ◽  
Laminated Composite ◽  
Rear Face ◽  
Ballistic Performance ◽  
Layer Sequence ◽  
Composite Armor ◽  
Cp Ti

The effect of the layer sequence on the ballistic performance of Ti6Al4V (35 mm)/CP-Ti (5 mm) laminated composite armor, against a 12.7 mm armor piercing projectile, was systematically investigated, both experimentally and computationally. By introducing the Johnson–Cook constitutive model and fracture criterion, the penetrating process of the composite plate was well-simulated. Furthermore, the influence of the layer sequence on the ballistic performance and failure mechanism of the composite plate was evaluated from the perspective of energy absorption and the stress distribution. Numerical simulation results of the macro morphology and penetration depth agreed well with the experimental results. The results showed that the energy absorption histories of each layer and stress distribution of the composite plate were found to be significantly affected by the arrangement sequence. The ballistic performance of Ti6Al4V/CP-Ti was far superior to that of CP-Ti/Ti6Al4V because more energy was absorbed in the early stage of the penetration process, thereby reducing the damage to the rear face. Further studies showed that the first principal stress in both structures was radially distributed in space, but was mainly concentrated at the rear face when the CP-Ti was placed at the front. Therefore, this stress induced cracking and failure in that region and, consequently, lowered the overall ballistic performance.

Ballistic Performance of Hybrid Structure Armor against Projectile

2013 ◽  
Vol 433-435 ◽  
pp. 2064-2067 ◽  
Author(s):  
Qun Wang ◽  
Yu Lei Li ◽  
Jin Jun Tang ◽  
Xing Wang ◽  
Xiao Yu Jin ◽  
...  
Keyword(s):  
Ultrahigh Molecular Weight Polyethylene ◽  
Areal Density ◽  
Hybrid Structure ◽  
Alumina Ceramics ◽  
Ballistic Performance ◽  
Standard Size ◽  
Ultrahigh Molecular Weight ◽  
Composite Armor ◽  
Energy Absorbing ◽  
Uhmwpe Composite

Based on the understanding of material characteristics and interaction between projectile and target, a lightweight hybrid composite armor target consisting of alumina ceramics pellets and ultrahigh molecular weight polyethylene (UHMWPE) was designed and prepared. The target areal density of the armor panel was 7.5 g/cm2. The standard size of the armor panel was 150mm×150mm×43mm. The Ballistic Performance of Alumina/UHMWPE composite armor against an impact of 12.7 mm armor piercing (AP) projectile was investigated at the nominal velocity of 818 m/s. The energy absorbing mechanism revealed that the armor was able to protect against the projectile, together with weight saving.

Sign in / Sign up

Export Citation Format

Share Document