Note: Lever-type bidirectional stick-slip piezoelectric actuator with flexible hinge

2018 ◽  
Vol 89 (8) ◽  
pp. 086101 ◽  
Author(s):  
Yikang Li ◽  
Hengyu Li ◽  
Tinghai Cheng ◽  
Xiaohui Lu ◽  
Hongwei Zhao ◽  
...  
Keyword(s):  
Piezoelectric Actuator ◽  
Stick Slip ◽  
Flexible Hinge

A stick-slip linear piezoelectric actuator with mode conversion flexible hinge driven by symmetrical waveform

2020 ◽  
Vol 29 (5) ◽  
pp. 055035
Author(s):  
Xiaosong Zhang ◽  
Yang Yu ◽  
Qiang Gao ◽  
Guangda Qiao ◽  
Zelin Li ◽  
...  
Keyword(s):  
Piezoelectric Actuator ◽  
Mode Conversion ◽  
Stick Slip ◽  
Flexible Hinge

scholarly journals Investigation on a Linear Piezoelectric Actuator Based on Stick-Slip/Scan Excitation

Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 39
Author(s):  
Yunlai Shi ◽  
Chengshu Lou ◽  
Jun Zhang
Keyword(s):  
High Resolution ◽  
Piezoelectric Actuator ◽  
Composite Structure ◽  
Piezoelectric Composite ◽  
Linear Motion ◽  
Slip Mode ◽  
Stick Slip ◽  
Flexible Hinge ◽  
Long Stroke ◽  
Scan Modes

To perform a high resolution and long stroke application in optical precision instruments, a linear piezoelectric actuator operated in stick-slip/scan modes for driving a linear motion table is presented. The proposed piezoelectric actuator is a piezoelectric composite structure, which includes a metal elastomer, a piezoelectric stack, and a frictional ball. The purpose of this paper is to describe the operation principle, design, and the running test and resolution test of the linear motion table driven by the proposed piezoelectric actuator. The notable feature is the flexible hinges of the actuator, including composite hinge, pre-pressure adjustment flexible hinge, and transmission flexible hinge, which are designed for decoupling the motion in the action direction of the piezoelectric stack and the direction in which the pre-pressure is applied. A prototype has been fabricated and two operation modes of the piezoelectric actuator, stick-slip and scan mode, were utilized to test the driving characteristics of the linear motion table. Experimental results show that the finest step resolutions in stick-slip mode and scan mode achieved 12 nm and 4 nm, respectively.

scholarly journals Design, Analysis, and Experiment on a Novel Stick-Slip Piezoelectric Actuator with a Lever Mechanism

Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 863 ◽  
Author(s):  
Weiqing Huang ◽  
Mengxin Sun
Keyword(s):  
Piezoelectric Actuator ◽  
Simple Structure ◽  
Fast Response ◽  
Displacement Sensor ◽  
Design Parameters ◽  
The Finite Element Method ◽  
Stick Slip ◽  
Lever Mechanism ◽  
Series Of Experiments ◽  
Stator Design

A piezoelectric actuator using a lever mechanism is designed, fabricated, and tested with the aim of accomplishing long-travel precision linear driving based on the stick-slip principle. The proposed actuator mainly consists of a stator, an adjustment mechanism, a preload mechanism, a base, and a linear guide. The stator design, comprising a piezoelectric stack and a lever mechanism with a long hinge used to increase the displacement of the driving foot, is described. A simplified model of the stator is created. Its design parameters are determined by an analytical model and confirmed using the finite element method. In a series of experiments, a laser displacement sensor is employed to measure the displacement responses of the actuator under the application of different driving signals. The experiment results demonstrate that the velocity of the actuator rises from 0.05 mm/s to 1.8 mm/s with the frequency increasing from 30 Hz to 150 Hz and the voltage increasing from 30 V to 150 V. It is shown that the minimum step distance of the actuator is 0.875 μm. The proposed actuator features large stroke, a simple structure, fast response, and high resolution.

A stick–slip piezoelectric actuator with high consistency in forward and reverse motions

2020 ◽  
Vol 91 (10) ◽  
pp. 105005
Author(s):  
Zhi Xu ◽  
Xuan Li ◽  
Kuifeng Wang ◽  
Tianwei Liang ◽  
Jingshi Dong ◽  
...  
Keyword(s):  
Piezoelectric Actuator ◽  
Stick Slip ◽  
High Consistency

Novel Precision PZT-Driven Micropositioning Stage with Large Travel Range

2009 ◽  
Vol 407-408 ◽  
pp. 159-162
Author(s):  
Hua Wei Chen ◽  
Ichiro Hagiwara
Keyword(s):  
Dynamic Model ◽  
Piezoelectric Actuator ◽  
Dynamic Properties ◽  
Flexure Hinge ◽  
Slip Model ◽  
Stick Slip ◽  
Friction Effect ◽  
Simulation Results

One novel long-travel piezoelectric-driven linear micropositioning stage capable of moving in a stepping mode is developed. The stick-slip friction effect between flexure hinge actuation tips with a sliding stage is used to drive the stage step-by-step through an enlarged displacement of piezoelectric actuator. In order to enlarge the travel range, magnifying mechanism is optimally designed by use of flexure hinge and lever beam. Moreover, dynamic model of such stage is proposed by consideration of reset integrator stick-slip model. The simulation results show that the stage has considerable good dynamic properties.

scholarly journals A Novel Stick-Slip Type Rotary Piezoelectric Actuator

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Yuan Wang ◽  
Minglong Xu ◽  
Shubao Shao ◽  
Siyang Song ◽  
Yan Shao
Keyword(s):  
Piezoelectric Actuator ◽  
Experimental System ◽  
Driving Voltage ◽  
Stick Slip ◽  
Piezoelectric Stacks ◽  
Long Stroke ◽  
Fine Resolution ◽  
Stick Slip Motion ◽  
Slip Motion ◽  
Sawtooth Waveform

A novel stick-slip rotary piezoelectric actuator is designed for optical use. The actuator is proposed, fabricated, and tested with the aim of realizing both fine resolution and a long stroke. The dynamic model of the actuator is established, and simulations are performed to discover how the input driving voltage affects the stick-slip motion of the actuator. An experimental system is built to evaluate the performance of the actuator at different frequencies, voltages, and numbers of driving piezoelectric stacks. Experimental results show that the minimal output stepping angle is 3.5 μrad (0.2 millidegrees) under a sawtooth waveform having a voltage of 13 V and frequency of 3000 Hz and that the velocity reaches 0.44 rad/s (25°/s) under a sawtooth waveform having a voltage of 93 V and frequency of 3000 Hz, while the stroke is infinite. The proposed actuator provides stable and accurate rotary motion and realizes a high velocity.

scholarly journals An Umbrella-Shaped Linear Piezoelectric Actuator Based on Stick-Slip Motion Principle

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 157724-157729 ◽  
Author(s):  
Jiafeng Yao ◽  
Junjie Cai ◽  
Yili Hu ◽  
Jianming Wen ◽  
Nen Wan ◽  
...  
Keyword(s):  
Piezoelectric Actuator ◽  
Stick Slip ◽  
Stick Slip Motion ◽  
Slip Motion

A Novel Stick–Slip Piezoelectric Actuator Based on a Triangular Compliant Driving Mechanism

2019 ◽  
Vol 66 (7) ◽  
pp. 5374-5382 ◽  
Author(s):  
Yangkun Zhang ◽  
Yuxin Peng ◽  
Zhenxing Sun ◽  
Haoyong Yu
Keyword(s):  
Piezoelectric Actuator ◽  
Driving Mechanism ◽  
Stick Slip
Sign in / Sign up

Export Citation Format

Share Document