Tensile strength of ramie yarn (spinning by machine)/HDPE thermoplastic matrix composites

2016 ◽  
Author(s):  
Lies Banowati ◽  
Bambang K. Hadi ◽  
Rochim Suratman ◽  
Aulia Faza
Keyword(s):  
Tensile Strength ◽  
Matrix Composites ◽  
Thermoplastic Matrix ◽  
Ramie Yarn

The Influence of the Hot Processing Conditions on the Impregnating Degree of GF/PET Friction Spun Core Yarn

2012 ◽  
Vol 518-523 ◽  
pp. 841-846
Author(s):  
Hai Yan Xu ◽  
Nan Liang Chen
Keyword(s):  
Tensile Strength ◽  
Cross Section ◽  
Holding Time ◽  
Matrix Composites ◽  
Processing Conditions ◽  
Molding Temperature ◽  
Thermoplastic Matrix ◽  
Core Yarn ◽  
The Way

The way of the friction spun core yarn as the fabric preform used in thermoplastic matrix composites is considered outstanding. The hot processing conditions of forming composites such as the molding temperature, the holding time and the pressure influence the impregnating degree of the composites, which is investigated though the observation of cross-section and tensile strength.

scholarly journals Diode Laser Assisted Filament Winding of Thermoplastic Matrix Composites

Materials ◽  
2010 ◽  
Vol 3 (1) ◽  
pp. 563-571 ◽  
Author(s):  
Fabrizio Quadrini ◽  
Erica Anna Squeo ◽  
Claudia Prosperi
Keyword(s):  
Diode Laser ◽  
Filament Winding ◽  
Matrix Composites ◽  
Thermoplastic Matrix

scholarly journals Evaluation of the Impact of Organic Fillers on Selected Properties of Organosilicon Polymer

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1103
Author(s):  
Sara Sarraj ◽  
Małgorzata Szymiczek ◽  
Tomasz Machoczek ◽  
Maciej Mrówka
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Accelerated Aging ◽  
Strength Properties ◽  
Visual Observation ◽  
Walnut Shell ◽  
Pistachio Shell ◽  
Thermoplastic Matrix ◽  
Static Tensile ◽  
The Impact

Eco-friendly composites are proposed to substitute commonly available polymers. Currently, wood–plastic composites and natural fiber-reinforced composites are gaining growing recognition in the industry, being mostly on the thermoplastic matrix. However, little data are available about the possibility of producing biocomposites on a silicone matrix. This study focused on assessing selected organic fillers’ impact (ground coffee waste (GCW), walnut shell (WS), brewers’ spent grains (BSG), pistachio shell (PS), and chestnut (CH)) on the physicochemical and mechanical properties of silicone-based materials. Density, hardness, rebound resilience, and static tensile strength of the obtained composites were tested, as well as the effect of accelerated aging under artificial seawater conditions. The results revealed changes in the material’s properties (minimal density changes, hardness variation, overall decreasing resilience, and decreased tensile strength properties). The aging test revealed certain bioactivities of the obtained composites. The degree of material degradation was assessed on the basis of the strength characteristics and visual observation. The investigation carried out indicated the impact of the filler’s type, chemical composition, and grain size on the obtained materials’ properties and shed light on the possibility of acquiring ecological silicone-based materials.

scholarly journals Development of an Additive Manufacturing System for the Deposition of Thermoplastics Impregnated with Carbon Fibers

2019 ◽  
Vol 3 (2) ◽  
pp. 35 ◽  
Author(s):  
Miguel Reis Silva ◽  
António M. Pereira ◽  
Nuno Alves ◽  
Gonçalo Mateus ◽  
Artur Mateus ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Additive Manufacturing ◽  
Carbon Fibers ◽  
Low Cost ◽  
Deposition Process ◽  
Processing Parameters ◽  
Yarn Diameter ◽  
Thermoplastic Matrix ◽  
Anisotropic Mechanical Properties ◽  
Long Carbon Fiber

This work presents an innovative system that allows the oriented deposition of continuous fibers or long fibers, pre-impregnated or not, in a thermoplastic matrix. This system is used in an integrated way with the filamentary fusion additive manufacturing technology and allows a localized and oriented reinforcement of polymer components for advanced engineering applications at a low cost. To demonstrate the capabilities of the developed system, composite components of thermoplastic matrix (polyamide) reinforced with pre-impregnated long carbon fiber (carbon + polyamide), 1 K and 3 K, were processed and their tensile and flexural strength evaluated. It was demonstrated that the tensile strength value depends on the density of carbon fibers present in the composite, and that with the passage of 2 to 4 layers of fibers, an increase in breaking strength was obtained of about 366% and 325% for the 3 K and 1 K yarns, respectively. The increase of the fiber yarn diameter leads to higher values of tensile strength of the composite. The obtained standard deviation reveals that the deposition process gives rise to components with anisotropic mechanical properties and the need to optimize the processing parameters, especially those that lead to an increase in adhesion between deposited layers.

scholarly journals Utilization of Leather Waste Fibers in Polymer Matrix Composites Based on Acrylonitrile-Butadiene Rubber

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 117
Author(s):  
Le Thuy Hang ◽  
Do Quoc Viet ◽  
Nguyen Pham Duy Linh ◽  
Vu Anh Doan ◽  
Hai-Linh Thi Dang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polymer Matrix Composites ◽  
Waste Product ◽  
Dynamic Mechanical Properties ◽  
Hammer Mill ◽  
Butadiene Rubber ◽  
Matrix Composites ◽  
Leather Industry ◽  
Tear Strength

In this study, we present the fabrication of nitrile butadiene rubber/waste leather fiber (NBR/WLF) composites with different weight percentages of WLF and NBR (0/100, 20/80, 30/70, 40/60, 50/50, 60/40 wt/wt). WLF was prepared by cutting the scrap leathers from the waste product of the Vietnamese leather industry. Subsequently, in order to make the short fibers, it was mixed by a hammer mill. The characteristics of WLF/NBR composites such as mechanical properties (tensile strength, tear strength, hardness), dynamic mechanical properties, toluene absorption, and morphology were carefully evaluated. As a result, the tensile strength and tear strength become larger with increasing WLF content from 0 to 50 wt% and they decrease when further increasing WLF content. The highest tensile strength of 12.5 MPa and tear strength of 72.47 N/mm were achieved with the WLF/NBR ratio of 50/50 wt%. Both hardness and resistance of the developed materials with toluene increased with increasing WLF content. The SEM results showed a good adhesion of NBR matrix and the WLF. The increasing of storage modulus (E’) in comparison with raw NBR showed good compatibility between WLF and NBR matrix. This research showed that the recycled material from waste leather and NBR was successfully prepared and has great potential for manufacturing products such as floor covering courts and playgrounds, etc.

Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting Method

2015 ◽  
Vol 787 ◽  
pp. 583-587 ◽  
Author(s):  
V. Mohanavel ◽  
K. Rajan ◽  
K.R. Senthil Kumar
Keyword(s):  
Tensile Strength ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Scanning Electron Micrographs ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
In Situ Reaction ◽  
Halide Salts ◽  
Scanning Electron

In the present study, an aluminum alloy AA6351 was reinforced with different percentages (1, 3 and 5 wt %) of TiB2 particles and they were successfully fabricated by in situ reaction of halide salts, potassium hexafluoro-titanate and potassium tetrafluoro-borate, with aluminium melt. Tensile strength, yield strength and hardness of the composite were investigated. In situ reaction between the inorganic salts K2TiF6 and KBF4 to molten aluminum leads to the formation of TiB2 particles. The prepared aluminum matrix composites were characterized using X-ray diffraction and scanning electron microscope. Scanning electron micrographs revealed a uniform dispersal of TiB2 particles in the aluminum matrix. The results obtained indicate that the hardness and tensile strength were increased with an increase in weight percentages of TiB2 contents.

Reuse of polyester-glass laminate waste in polymer composites

2021 ◽  
Vol 2 (107) ◽  
pp. 49-58
Author(s):  
M. Chomiak
Keyword(s):  
Tensile Strength ◽  
Composite Materials ◽  
Impact Strength ◽  
Volume Fraction ◽  
Matrix Composites ◽  
Glass Laminate ◽  
The Sustainable Development ◽  
Processing Properties ◽  
New Generation ◽  
Practical Implications

Purpose: of this paper is to develop a new generation of polymer composite materials that would ensure the use of residual and serious environmental problems of polyester-glass laminate waste. Design/methodology/approach: The glass reinforced polyester waste was ground and added to produce new composites. Thermoplastic - high impact polystyrene was selected for the composite matrix. Composites containing 10, 20, 30% by weight of the filler of polyester-glass laminate powder were made. The process of extrusion and subsequent injection was used to prepare the test samples. The influence of the filler on selected properties of composites was evaluated. The physical properties of the filler as well as the processing properties of the mixture as well as the mechanical properties - impact strength and tensile strength of the obtained composites were investigated. Findings: A decrease in tensile strength and impact strength was observed along with an increase in the amount of filler. Research limitations/implications: It would be interesting to carry out further analyzes, in particular with a higher volume fraction of the filler or with a different composite structure, e.g. using PVC as a matrix. The developed research topic is a good material for the preparation of publications of a practical and scientific nature, especially useful in the research and industrial environment. Practical implications: The shredded glass-polyester waste can be used as a filler of polystyrene, however, the resulting composite could be used to produce parts with slightly less responsible functions such as artificial jewelery or toy elements. Originality/value: Obtained results are a new solution a global waste management solution for glass reinforced polyester waste, which may contribute to the sustainable development of the composite materials industry through the partial utilization of waste composites with a duroplastic matrix.

Sign in / Sign up

Export Citation Format

Share Document