Two-point statistics for turbulent boundary layers and channels at Reynolds numbers up to δ+ ≈ 2000

2014 ◽  
Vol 26 (10) ◽  
pp. 105109 ◽  
Author(s):  
Juan A. Sillero ◽  
Javier Jiménez ◽  
Robert D. Moser
Keyword(s):  
Boundary Layers ◽  
Reynolds Numbers ◽  
Turbulent Boundary Layers

Low-Reynolds-Number Turbulent Boundary Layers in Zero and Favorable Pressure Gradients

1983 ◽  
Vol 27 (03) ◽  
pp. 147-157 ◽  
Author(s):  
A. J. Smits ◽  
N. Matheson ◽  
P. N. Joubert
Keyword(s):  
Friction Coefficient ◽  
Skin Friction ◽  
Boundary Layers ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients ◽  
Mean Flow ◽  
Low Reynolds

This paper reports the results of an extensive experimental investigation into the mean flow properties of turbulent boundary layers with momentum-thickness Reynolds numbers less than 3000. Zero pressure gradient and favorable pressure gradients were studied. The velocity profiles displayed a logarithmic region even at very low Reynolds numbers (as low as Rθ = 261). The results were independent of the leading-edge shape, and the pin-type turbulent stimulators performed well. It was found that the shape and Clauser parameters were a little higher than the correlation proposed by Coles [10], and the skin friction coefficient was a little lower. The skin friction coefficient behavior could be fitted well by a simple power-law relationship in both zero and favorable pressure gradients.

A Study on Turbulent Boundary Layers on a Smooth Flat Plate in an Open Channel

2001 ◽  
Vol 123 (2) ◽  
pp. 394-400 ◽  
Author(s):  
Ram Balachandar ◽  
D. Blakely ◽  
M. Tachie ◽  
G. Putz
Keyword(s):  
Flat Plate ◽  
Froude Number ◽  
Boundary Layers ◽  
Open Channel ◽  
Reynolds Numbers ◽  
Turbulent Boundary Layers ◽  
Wall Region ◽  
Mean Velocity ◽  
Number Range ◽  
High Reynolds

An experimental study was undertaken to investigate the characteristics of turbulent boundary layers developing on smooth flat plate in an open channel flow at moderately high Froude numbers (0.25<Fr<1.1) and low momentum thickness Reynolds numbers 800<Reθ<2900. The low range of Reynolds numbers and the high Froude number range make the study important, as most other studies of this type have been conducted at high Reynolds numbers and lower Froude numbers (∼0.1). Velocity measurements were carried out using a laser-Doppler anemometer equipped with a beam expansion device to enable measurements close to the wall region. The shear velocities were computed using the near-wall measurements in the viscous subregion. The variables of interest include the longitudinal mean velocity, the turbulence intensity, and the velocity skewness and flatness distributions across the boundary layer. The applicability of a constant Coles’ wake parameter (Π=0.55) to open channel flows has been discounted. The effect of the Froude number on the above parameters was also examined.

scholarly journals Eddy Viscosities and Mixing Lengths for Turbulent Boundary Layers on Flat Plates, Smooth or Rough

1988 ◽  
Vol 32 (04) ◽  
pp. 229-237
Author(s):  
Paul S. Granville
Keyword(s):  
Boundary Layers ◽  
Rough Surfaces ◽  
Equations Of Motion ◽  
Reynolds Numbers ◽  
Turbulent Boundary Layers ◽  
Flat Plates ◽  
Low Reynolds Numbers ◽  
Low Reynolds ◽  
Similarity Laws

Algebraic formulas are derived here for the eddy viscosities and mixing lengths of turbulent boundary layers on flat plates. The effect of low Reynolds numbers, especially on rough surfaces, is included. The formulas are based on the similarity laws and the equations of motion. Both smooth and rough surfaces are considered. The agreement with Klebanoff's measurements is excellent.

Rough-Wall Turbulent Boundary Layers

1991 ◽  
Vol 44 (1) ◽  
pp. 1-25 ◽  
Author(s):  
M. R. Raupach ◽  
R. A. Antonia ◽  
S. Rajagopalan
Keyword(s):  
Boundary Layers ◽  
Strong Support ◽  
Reynolds Numbers ◽  
Viscous Sublayer ◽  
Turbulent Boundary Layers ◽  
Rough Wall ◽  
Roughness Sublayer ◽  
Turbulence Structure ◽  
Wall Boundary ◽  
High Reynolds

This review considers theoretical and experimental knowledge of rough-wall turbulent boundary layers, drawing from both laboratory and atmospheric data. The former apply mainly to the region above the roughness sublayer (in which the roughness has a direct dynamical influence) whereas the latter resolve the structure of the roughness sublayer in some detail. Topics considered include the drag properties of rough surfaces as functions of the roughness geometry, the mean and turbulent velocity fields above the roughness sublayer, the properties of the flow close to and within the roughness canopy, and the nature of the organized motion in rough-wall boundary layers. Overall, there is strong support for the hypothesis of wall similarity: At sufficiently high Reynolds numbers, rough-wall and smooth-wall boundary layers have the same turbulence structure above the roughness (or viscous) sublayer, scaling with height, boundary-layer thickness, and friction velocity.

Turbulent Boundary Layers in Low Reynolds Number Shallow Open Channel Flows

1999 ◽  
Vol 121 (3) ◽  
pp. 684-689 ◽  
Author(s):  
Ram Balachandar ◽  
Shyam S. Ramachandran
Keyword(s):  
Reynolds Number ◽  
Boundary Layers ◽  
Open Channel ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Turbulent Boundary Layers ◽  
Channel Flows ◽  
Open Channel Flows ◽  
Mean Velocity ◽  
Low Reynolds

The results of an experimental investigation of turbulent boundary layers in shallow open channel flows at low Reynolds numbers are presented. The study was aimed at extending the database toward lower values of Reynolds number. The data presented are primarily concerned with the longitudinal mean velocity, turbulent-velocity fluctuations, boundary layer shape parameter and skin friction coefficient for Reynolds numbers based on the momentum thickness (Reθ) ranging from 180 to 480. In this range, the results of the present investigation in shallow open channel flows indicate a lack of dependence of the von Karman constant κ on Reynolds number. The extent to which the mean velocity data overlaps with the log-law decreases with decreasing Reθ. The variation of the strength of the wake with Reθ is different from the trend proposed earlier by Coles.

Uniform momentum zones in turbulent boundary layers

2015 ◽  
Vol 786 ◽  
pp. 309-331 ◽  
Author(s):  
Charitha M. de Silva ◽  
Nicholas Hutchins ◽  
Ivan Marusic
Keyword(s):  
Reynolds Number ◽  
Boundary Layers ◽  
Reynolds Numbers ◽  
Streamwise Velocity ◽  
Turbulent Boundary Layers ◽  
Linear Increase ◽  
Length Scale ◽  
Image Velocimetry ◽  
Order Of Magnitude ◽  
Log Linear

Structural properties of regions of uniform streamwise momentum in turbulent boundary layers are examined using experimental databases obtained from particle image velocimetry. This investigation employs a large range of Reynolds numbers, spanning more than an order of magnitude ($Re_{{\it\tau}}=10^{3}{-}10^{4}$), enabling us to provide a detailed description of uniform momentum zones as a function of Reynolds number. Our analysis starts by examining the identification criterion used by Adrian et al. (J. Fluid Mech., vol. 422, 2000, pp. 1–54) to report the presence of uniform momentum zones in turbulent boundary layers. This criterion is then applied to show that a zonal-like structural arrangement is prevalent in all datasets examined, emphasising its importance in the structural organisation. Streamwise velocity fluctuations within the zones are observed to be small but they are bounded by distinct step changes in streamwise momentum which indicate that shear layers of intense vorticity separate each zone. A log-linear increase in the number of these zones with increasing Reynolds number is revealed, together with an increase in the thicknesses of zones with increasing distance from the wall. These results support a hierarchical length-scale distribution of coherent structures, which generate zonal-like organisation within turbulent boundary layers. Interpretation of these findings is aided by employing synthetic velocity fields generated using a model based on the attached eddy hypothesis, which is described in the work of Perry and co-workers. Comparisons between the model and experimental results show that a hierarchy of self-similar structures leads to population densities and length-scale distributions of uniform momentum zones that closely adhere to those observed experimentally in this study.

Sign in / Sign up

Export Citation Format

Share Document