Vortex-shedding suppression in two-dimensional mixed convective flows past circular and square cylinders

2013 ◽  
Vol 25 (5) ◽  
pp. 053603 ◽  
Author(s):  
Nadeem Hasan ◽  
Rashid Ali
Keyword(s):  
Vortex Shedding ◽  
Two Dimensional ◽  
Convective Flows ◽  
Square Cylinders

Effects of Corner Cutoffs on Flow Past Two Square Cylinders in a Tandem Arrangement

2012 ◽  
Author(s):  
Y. T. Krishne Gowda ◽  
H. V. Ravindra ◽  
C. K. Vikram
Keyword(s):  
Reynolds Number ◽  
Pressure Distribution ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Lift Coefficient ◽  
Two Dimensional ◽  
Square Cylinder ◽  
Tandem Arrangement ◽  
Square Cylinders ◽  
Flow Past

Flow past the two square cylinders with and without corner modification in a tandem arrangement has been simulated using a CFD code FLUENT. A Reynolds number of 100 and pitch to perimeter ratios (PPR) of 2,4 and 6 are considered for the investigation. The flow is assumed to be two dimensional unsteady and incompressible. The obtained results are presented in the form of streamlines, pressure distribution, monitored velocity, lift coefficient and Strouhal number. Results indicate, in case of chamfered and rounded corners, there is decrease in the wake width and thereby the lift values. For the square cylinders of same perimeters with and without corner modification, the size of the eddy and the monitored velocity in between the square cylinders increases with increase in PPR. Frequency of vortex shedding is same in between the cylinders and in the downstream of the cylinder. Frequency of vortex shedding decreases with the introduction of second cylinder either in the upstream or downstream of the first cylinder. The lift coefficient of square cylinder with corner modification decreases but Strouhal number increases when compared with a square cylinder without corner modification.

Aerodynamics of a two-dimensional bluff body with the cross-section of a train

2020 ◽  
Vol 23 (12) ◽  
pp. 2679-2693 ◽  
Author(s):  
Huan Li ◽  
Xuhui He ◽  
Hanfeng Wang ◽  
Si Peng ◽  
Shuwei Zhou ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Large Amplitude ◽  
High Speed ◽  
Bluff Body ◽  
Mean Amplitude ◽  
Two Dimensional ◽  
Aerodynamic Forces ◽  
Moderate Reynolds Number ◽  
Amplitude Mode

Experiments on the aerodynamics of a two-dimensional bluff body simplified from a China high-speed train in crosswinds were carried out in a wind tunnel. Effects of wind angle of attack α varying in [−20°, 20°] were investigated at a moderate Reynolds number Re = 9.35 × 104 (based on the height of the model). Four typical behaviors of aerodynamics were identified. These behaviors are attributed to the flow structure around the upper and lower halves of the model changing from full to intermittent reattachment, and to full separation with a variation in α. An alternate transition phenomenon, characterized by an alteration between large- and small-amplitude aerodynamic fluctuations, was detected. The frequency of this alteration is about 1/10 of the predominant vortex shedding. In the intervals of the large-amplitude behavior, aerodynamic forces fluctuate periodically with a strong span-wise coherence, which are caused by the anti-symmetric vortex shedding along the stream-wise direction. On the contrary, the aerodynamic forces fluctuating at small amplitudes correspond to a weak span-wise coherence, which are ascribed to the symmetric vortex shedding from the upper and lower halves of the model. Generally, the mean amplitude of the large-amplitude mode is 3 times larger than that of the small one. Finally, the effects of Reynolds number were examined within Re = [9.35 × 104, 2.49 × 105]. Strong Reynolds number dependence was observed on the model with two rounded upper corners.

Two- and Three-Dimensional Simulations of the Flow Around a Cylinder Fitted With Strakes

2012 ◽  
Author(s):  
Bruno S. Carmo ◽  
Rafael S. Gioria ◽  
Ivan Korkischko ◽  
Cesar M. Freire ◽  
Julio R. Meneghini
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Free Stream ◽  
Three Dimensional ◽  
The Body ◽  
Vortex Wake ◽  
Two Dimensional ◽  
Flow Around A Cylinder ◽  
Three Dimensional Simulations ◽  
Angle Of Rotation

Two- and three-dimensional simulations of the flow around straked cylinders are presented. For the two-dimensional simulations we used the Spectral/hp Element Method, and carried out simulations for five different angles of rotation of the cylinder with respect to the free stream. Fixed and elastically-mounted cylinders were tested, and the Reynolds number was kept constant and equal to 150. The results were compared to those obtained from the simulation of the flow around a bare cylinder under the same conditions. We observed that the two-dimensional strakes are not effective in suppressing the vibration of the cylinders, but also noticed that the responses were completely different even with a slight change in the angle of rotation of the body. The three-dimensional results showed that there are two mechanisms of suppression: the main one is the decrease in the vortex shedding correlation along the span, whilst a secondary one is the vortex wake formation farther downstream.

The turning couples on an elliptic particle settling in a vertical channel

1994 ◽  
Vol 271 ◽  
pp. 1-16 ◽  
Author(s):  
Peter Y. Huang ◽  
Jimmy Feng ◽  
Daniel D. Joseph
Keyword(s):  
Shear Stress ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Vertical Channel ◽  
Navier Stokes ◽  
Front Face ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Back Face ◽  
The One

We do a direct two-dimensional finite-elment simulation of the Navier–Stokes equations and compute the forces which turn an ellipse settling in a vertical channel of viscous fluid in a regime in which the ellipse oscillates under the action of vortex shedding. Turning this way and that is induced by large and unequal values of negative pressure at the rear separation points which are here identified with the two points on the back face where the shear stress vanishes. The main restoring mechanism which turns the broadside of the ellipse perpendicular to the fall is the high pressure at the ‘stagnation point’ on the front face, as in potential flow, which is here identified with the one point on the front face where the shear stress vanishes.

Flow past a rotationally oscillating cylinder

2013 ◽  
Vol 735 ◽  
pp. 307-346 ◽  
Author(s):  
S. Kumar ◽  
C. Lopez ◽  
O. Probst ◽  
G. Francisco ◽  
D. Askari ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Three Dimensional ◽  
Far Field ◽  
Two Dimensional ◽  
Flow Past ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Flow Visualizations ◽  
Hydrogen Bubble Technique

AbstractFlow past a circular cylinder executing sinusoidal rotary oscillations about its own axis is studied experimentally. The experiments are carried out at a Reynolds number of 185, oscillation amplitudes varying from $\mathrm{\pi} / 8$ to $\mathrm{\pi} $, and at non-dimensional forcing frequencies (ratio of the cylinder oscillation frequency to the vortex-shedding frequency from a stationary cylinder) varying from 0 to 5. The diagnostic is performed by extensive flow visualization using the hydrogen bubble technique, hot-wire anemometry and particle-image velocimetry. The wake structures are related to the velocity spectra at various forcing parameters and downstream distances. It is found that the phenomenon of lock-on occurs in a forcing frequency range which depends not only on the amplitude of oscillation but also the downstream location from the cylinder. The experimentally measured lock-on diagram in the forcing amplitude and frequency plane at various downstream locations ranging from 2 to 23 diameters is presented. The far-field wake decouples, after the lock-on at higher forcing frequencies and behaves more like a regular Bénard–von Kármán vortex street from a stationary cylinder with vortex-shedding frequency mostly lower than that from a stationary cylinder. The dependence of circulation values of the shed vortices on the forcing frequency reveals a decay character independent of forcing amplitude beyond forcing frequency of ${\sim }1. 0$ and a scaling behaviour with forcing amplitude at forcing frequencies ${\leq }1. 0$. The flow visualizations reveal that the far-field wake becomes two-dimensional (planar) near the forcing frequencies where the circulation of the shed vortices becomes maximum and strong three-dimensional flow is generated as mode shape changes in certain forcing parameter conditions. It is also found from flow visualizations that even at higher Reynolds number of 400, forcing the cylinder at forcing amplitudes of $\mathrm{\pi} / 4$ and $\mathrm{\pi} / 2$ can make the flow field two-dimensional at forcing frequencies greater than ${\sim }2. 5$.

Flow-Induced Streamwise Oscillation of Two Square Cylinders in Tandem Arrangement

2007 ◽  
Author(s):  
Atsushi Okajima ◽  
Takahiro Kiwata ◽  
Satoru Yasui ◽  
Yoshiki Mori ◽  
Shigeo Kimura
Keyword(s):  
Vortex Shedding ◽  
The Other ◽  
Limit Cycle Oscillation ◽  
Response Characteristics ◽  
Excitation Region ◽  
Square Cylinders ◽  
Reference Length ◽  
Tandem Square Cylinders ◽  
Karman Vortex ◽  
Cycle Oscillation

Flow-induced streamwise oscillation of two tandem square cylinders has been studied by means of free-oscillation testing in a wind tunnel. One cylinder was elastically supported so as to allow it to move in the streamwise direction; the other was fixed to the tunnel sidewalls. Small values of the reduced mass-damping parameter (Cn ≤ 1.63) have been considered. When the upstream cylinder is free to oscillate, there are two excitation regions: the first for reduced velocity, Vr, in the range 2.5 ≤ Vr ≤ 5 and cylinder gap distance to reference-length ratio, s, between 0.3 and 2, is due to movement-induced excitation accompanied by symmetrical vortex shedding, while the second, for 0.75 ≤ s ≤ 1.5 and 4.5 ≤ Vr ≤ 6.5, is due to vortex excitation by alternate Karman vortex shedding, accompanied with unstable limit-cycle oscillation. For wide gap distances over 2.5, an excitation region of the upstream cylinder occurs for 3.5 ≤ Vr ≤ 4.7, which is due to alternate Karman vortex shedding, and resembles the streamwise oscillation of a single cylinder. On the other hand, when the downstream cylinder is free to oscillate for narrow gap distances of 0.3 ≤ s ≤ 0.75, the response characteristics have an excitation region due to alternate Karman vortex shedding from the two cylinders, connected by dead water region between them, for 3.2 ≤ Vr ≤ 5.4. When s is greater than 1, the downstream cylinder experiences buffeting by wake fluctuation of the upstream cylinder.

scholarly journals Numerical Study of Flow Characteristics Around Confined Cylinder using OpenFOAM

2018 ◽  
Vol 7 (4.35) ◽  
pp. 617
Author(s):  
P. Mathupriya ◽  
L. Chan ◽  
H. Hasini ◽  
A. Ooi
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Numerical Study ◽  
Vortex Formation ◽  
Plane Channel ◽  
Flow Characteristics ◽  
Strong Interactions ◽  
Two Dimensional ◽  
Computational Fluid Dynamics Cfd ◽  
Shedding Frequency

The numerical study of the flow over a two-dimensional cylinder which is symmetrically confined in a plane channel is presented to study the characteristics of vortex shedding. The numerical model has been established using direct numerical simulation (DNS) based on the open source computational fluid dynamics (CFD) code named OpenFOAM. In the present study, the flow fields have been computed at blockage ratio, β of 0.5 and at Reynolds number, Re of 200 and 300. Two-dimensional simulations investigated on the effects of Reynolds number based on the vortex formation and shedding frequency. It was observed that the presence of two distinct shedding frequencies appear at higher Reynolds number due to the confinement effects where there is strong interactions between boundary layer, shear layer and the wake of the cylinder. The range of simulations conducted here has shown to produce results consistent with that available in the open literature. Therefore, OpenFOAM is found to be able to accurately capture the complex physics of the flow.

Numerical analysis of bluff body wakes under periodic open-loop control

2013 ◽  
Vol 739 ◽  
pp. 94-123 ◽  
Author(s):  
Derwin J. Parkin ◽  
M. C. Thompson ◽  
J. Sheridan
Keyword(s):  
Strouhal Number ◽  
Cross Section ◽  
Vortex Shedding ◽  
Open Loop ◽  
Wake Flow ◽  
Dynamic Mode ◽  
Two Dimensional ◽  
Near Wake ◽  
Recirculation Bubble ◽  
Number Range

AbstractLarge eddy simulations at$Re= 23\hspace{0.167em} 000$are used to investigate the drag on a two-dimensional elongated cylinder caused by rear-edge periodic actuation, with particular focus on an optimum open-loop configuration. The 3.64 (length/thickness) aspect-ratio cylinder has a rectangular cross-section with rounded leading corners, representing the two-dimensional cross-section of the now genericAhmed-body geometry. The simulations show that the optimum drag reduction occurs in the forcing Strouhal number range of$0. 09\leq S{t}_{act} \leq 0. 135$, which is approximately half of the Strouhal number corresponding to shedding of von Kármán vortices into the wake for the natural case. This result agrees well with recent experiments of Henninget al. (Active Flow Control, vol. 95, 2007, pp. 369–390). A thorough transient wake analysis employing dynamic mode decomposition is conducted for all cases, with special attention paid to the Koopman modes of the wake flow and vortex progression downstream. Two modes are found to coexist in all cases, the superimposition of which recovers the majority of features observed in the flow. Symmetric vortex shedding in the near wake, which effectively extends the mean recirculation bubble, is shown to be the major mechanism in lowering the drag. This is associated with opposite-signed vortices reducing the influence of natural vortex shedding, resulting in an increase in the pressure in the near wake, while the characteristic wake antisymmetry returns further downstream. Lower-frequency actuation is shown to create larger near-wake symmetric vortices, which improves the effectiveness of this process.

Sign in / Sign up

Export Citation Format

Share Document