In-situ electron holography of surface potential response to gate voltage application in a sub-30-nm gate-length metal-oxide-semiconductor field-effect transistor

2012 ◽  
Vol 100 (14) ◽  
pp. 143508 ◽  
Author(s):  
Nobuyuki Ikarashi ◽  
Hiroshi Takeda ◽  
Koichi Yako ◽  
Masami Hane
2019 ◽  
Vol 18 (2) ◽  
pp. 73-80
Author(s):  
Md Rabiul Islam ◽  
Md Kamrul Hasan ◽  
Md Abdul Mannan ◽  
M Tanseer Ali ◽  
Md Rokib Hasan

We have investigated the performance of Gallium Nitride (GaN) based Double-Gate (DG) Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET). Atlas Device Simulation Framework -Silvaco has been used to access Non-Equilibrium Green Function to distinguish the transfer characteristics curve, ON state current (ION), OFF-state current (IOFF), Drain Induced Barrier Lowering (DIBL), Subthreshold Swing, Electron Current Density, Conduction Band Energy and Electric Field. The concept of Solid state device physics on the effect of gate length studied for the next generation logic applications. GaN-based DG MOSFETs shows better performance than Si-based Single gate MOSFETs. The proposed device has drawn the attention over conventional SG-MOSFET due to fas switching performance. The device turn on and turn off voltage is respectively VGS=1V(On state) and VGS-0V(OFF State). To validate our simulation tool and model results, previous research model has been investigated using Silvaco Atlas and the results obtained are compared to the previous results.


2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Aryan Afzalian

AbstractUsing accurate dissipative DFT-NEGF atomistic-simulation techniques within the Wannier-Function formalism, we give a fresh look at the possibility of sub-10-nm scaling for high-performance complementary metal oxide semiconductor (CMOS) applications. We show that a combination of good electrostatic control together with high mobility is paramount to meet the stringent roadmap targets. Such requirements typically play against each other at sub-10-nm gate length for MOS transistors made of conventional semiconductor materials like Si, Ge, or III–V and dimensional scaling is expected to end ~12 nm gate-length (pitch of 40 nm). We demonstrate that using alternative 2D channel materials, such as the less-explored HfS2 or ZrS2, high-drive current down to ~6 nm is, however, achievable. We also propose a dynamically doped field-effect transistor concept, that scales better than its MOSFET counterpart. Used in combination with a high-mobility material such as HfS2, it allows for keeping the stringent high-performance CMOS on current and competitive energy-delay performance, when scaling down to virtually 0 nm gate length using a single-gate architecture and an ultra-compact design (pitch of 22 nm). The dynamically doped field-effect transistor further addresses the grand-challenge of doping in ultra-scaled devices and 2D materials in particular.


Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3554
Author(s):  
Jaeyeop Na ◽  
Jinhee Cheon ◽  
Kwangsoo Kim

In this paper, a novel 4H-SiC split heterojunction gate double trench metal-oxide-semiconductor field-effect transistor (SHG-DTMOS) is proposed to improve switching speed and loss. The device modifies the split gate double trench MOSFET (SG-DTMOS) by changing the N+ polysilicon split gate to the P+ polysilicon split gate. It has two separate P+ shielding regions under the gate to use the P+ split polysilicon gate as a heterojunction body diode and prevent reverse leakage `current. The static and most dynamic characteristics of the SHG-DTMOS are almost like those of the SG-DTMOS. However, the reverse recovery charge is improved by 65.83% and 73.45%, and the switching loss is improved by 54.84% and 44.98%, respectively, compared with the conventional double trench MOSFET (Con-DTMOS) and SG-DTMOS owing to the heterojunction.


Sign in / Sign up

Export Citation Format

Share Document