Effects of LED Phototherapy on Bone Defects Grafted with MTA in a Rodent Model: A Description of the Bone Repair by Light Microscopy

2011 ◽  
Author(s):  
Luiz Guilherme Pinheiro Soares ◽  
Nicole Ribeiro Silva Santos ◽  
Neandder A. Correia ◽  
Jean Nunes dos Santos ◽  
Anto^nio Luiz Barbosa Pinheiro ◽  
...  
Keyword(s):  
Light Microscopy ◽  
Bone Repair ◽  
Bone Defects ◽  
Rodent Model ◽  
Led Phototherapy

scholarly journals Bone repair in rats treated with sodic diclofenac and calcitonin

2006 ◽  
Vol 21 (suppl 4) ◽  
pp. 40-44 ◽  
Author(s):  
Maria Cristina Pita Sassioto ◽  
Celso Massaschi Inouye ◽  
Ricardo Dutra Aydos ◽  
Arthur Silveira de Figueiredo
Keyword(s):  
Light Microscopy ◽  
Bone Repair ◽  
Therapeutic Option ◽  
Bone Defects ◽  
Time Dependent ◽  
Test Results ◽  
Group Iii ◽  
Time Dependent Process ◽  
Histological Sections

PURPOSE: To investigate clinical and histologically the bone repair in treated animals with calcitonin and sodic diclofenac. METHODS: Ninety-six femoral defects were created in forty-eight animals distributed in four groups (n=24): either left untreated, treated with the sodic diclofenac or calcitonin or both. Follow-up was 7, 14 and 21 days. Histological sections stained by haematoxylin-eosin was observed under light microscopy (100X) and quantitatively scored for their trabecular formation. The groups and subgroups were compared being used the Kruskall-Wallis test. RESULTS: Smaller trabecular formation was observed in the animals of the group II and larger trabecular formation in the animals of the group III. Was found significant differences in the comparison between all the groups (Kruskall-Wallis, p <0.05). CONCLUSION: The obtained data suggest that the bone repair is a time-dependent process, which can be delayed by the sodic diclofenac and accelerated by the calcitonina, when used separately. The associated use of calcitonina and sodic diclofenac didn't show to be the best therapeutic option in the treatment of bone defects surgically created.

scholarly journals Repair of Surgical Bone Defects Grafted with Hydroxylapatite + β-TCP and Irradiated with λ=850 nm LED Light

2015 ◽  
Vol 26 (1) ◽  
pp. 19-25 ◽  
Author(s):  
Luiz Guilherme P. Soares ◽  
Aparecida Maria C. Marques ◽  
Milena G. Guarda ◽  
Jouber Mateus S. Aciole ◽  
Antonio Luiz B. Pinheiro ◽  
...  
Keyword(s):  
Bone Loss ◽  
Bone Repair ◽  
Histological Analysis ◽  
Blood Clot ◽  
Repair Process ◽  
Bone Defects ◽  
Advanced Stage ◽  
Led Phototherapy ◽  
Wide Range ◽  
The One

The treatment of bone loss due to different etiologic factors is difficult and many techniques aim to improve the repair, including a wide range of biomaterials and recently, photobioengineering. This work aimed to assess by histological analysis the repair of bone defects grafted with biphasic synthetic micro-granular HA + β-TCP associated with LED phototherapy. Forty rats were divided into 4 groups (Clot, LED, Biomaterial and LED + Biomaterial) each subdivided into 2 subgroups according to the time of animal death (15 and 30 days). Surgical bone defects were prepared on the femur of each animal with a trephine drill. In animals of the Clot group the defect was filled only by blood clot, in the LED group the defect filled with the clot was further irradiated. In the animals of Biomaterial and LED + Biomaterial groups the defect was filled by biomaterial and the last one was further irradiated (λ=850±10 nm, 150 mW, Φ ~ 0.5 cm2, 20 J/cm2 - session, 140 J/cm2- treatment) at 48-h intervals for 2 weeks. Following animal death, samples were taken and analyzed by light microscopy. Using the degree of maturation of the bone by assessment of the deposition/organization of the basophilic lines in the newly formed bone tissue, the LED + Biomaterial group was the one in a more advanced stage of bone repair process at the end of the experiment. It may be concluded that the use of LED phototherapy was effective in positively modulating the process of bone repair of bone defects in the femur of rats submitted or not to biomaterial grafting.

Regeneration of Bone Defects Using Bioactive Glass Combined with Adipose-derived Mesenchymal Stem Cells. An experimental in vivo study

2019 ◽  
Vol 70 (6) ◽  
pp. 1983-1987
Author(s):  
Cristian Trambitas ◽  
Anca Maria Pop ◽  
Alina Dia Trambitas Miron ◽  
Dorin Constantin Dorobantu ◽  
Flaviu Tabaran ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Bioactive Glass ◽  
Bone Repair ◽  
Bone Defects ◽  
Calvarial Bone ◽  
Specific Protocol ◽  
Repair Mechanisms ◽  
Male Wistar Rats

Large bone defects are a medical concern as these are often unable to heal spontaneously, based on the host bone repair mechanisms. In their treatment, bone tissue engineering techniques represent a promising approach by providing a guide for osseous regeneration. As bioactive glasses proved to have osteoconductive and osteoinductive properties, the aim of our study was to evaluate by histologic examination, the differences in the healing of critical-sized calvarial bone defects filled with bioactive glass combined with adipose-derived mesenchymal stem cells, compared to negative controls. We used 16 male Wistar rats subjected to a specific protocol based on which 2 calvarial bone defects were created in each animal, one was filled with Bon Alive S53P4 bioactive glass and adipose-derived stem cells and the other one was considered control. At intervals of one week during the following month, the animals were euthanized and the specimens from bone defects were histologically examined and compared. The results showed that this biomaterial was biocompatible and the first signs of osseous healing appeared in the third week. Bone Alive S53P4 bioactive glass could be an excellent bone substitute, reducing the need of bone grafts.

scholarly journals Biomaterial design strategies to address obstacles in craniomaxillofacial bone repair

RSC Advances ◽  
2021 ◽  
Vol 11 (29) ◽  
pp. 17809-17827
Author(s):  
Marley J. Dewey ◽  
Brendan A. C. Harley
Keyword(s):  
Bone Repair ◽  
Bone Defects ◽  
Design Strategies

There exist many challenges in the process of regenerating craniomaxillofacial bone defects, thus biomaterials must be designed to overcome these.

Enhancement of Bone Healing by Local Administration of Carbon Nanotubes Functionalized with Sodium Hyaluronate in Rat Tibiae

2017 ◽  
Vol 204 (3-4) ◽  
pp. 137-149 ◽  
Author(s):  
Vanessa B. Andrade ◽  
Marcos A. Sá ◽  
Renato M. Mendes ◽  
Paulo A. Martins-Júnior ◽  
Gerluza A.B. Silva ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bone Repair ◽  
Bone Matrix ◽  
Sodium Hyaluronate ◽  
Repair Process ◽  
Bone Defects ◽  
Bone Morphogenetic Protein 2 ◽  
Morphogenetic Protein ◽  
Bone Trabeculae ◽  
Endothelial Growth Factor

It has been reported that carbon nanotubes (CNTs) serve as nucleation sites for the deposition of bone matrix and cell proliferation. Here, we evaluated the effects of multi-walled CNTs (MWCNTs) on bone repair of rat tibiae. Furthermore, because sodium hyaluronate (HY) accelerates bone restoration, we associated CNTs with HY (HY-MWCNTs) in an attempt to boost bone repair. The bone defect was created by a 1.6-mm-diameter drill. After 7 and 14 days, tibiae were processed for histological and morphometric analyses. Immunohistochemistry was used to evaluate the expression of vascular endothelial growth factor (VEGF) in bone defects. Expression of osteocalcin (OCN), bone morphogenetic protein-2 (BMP-2), and collagen I (Col I) was assessed by real-time PCR. Histomorphometric analysis showed a similar increase in the percentage of bone trabeculae in tibia bone defects treated with HY and HY-MWCNTs, and both groups presented more organized and thicker bone trabeculae than nontreated defects. Tibiae treated with MWCNTs or HY- MWCNTs showed a higher expression of VEGF. Treatment with MWCNTs or HY-MWCNTs increased the expression of molecules involved in the bone repair process, such as OCN and BMP-2. Also, HY- and MWCNT-treated tibiae had an increased expression of Col I. Thus, it is tempting to conclude that CNTs associated or not with other materials such as HY emerged as a promising biomaterial for bone tissue engineering.

scholarly journals Preliminary in Vivo Evaluation of Bone Healing in Critical Size Bone Defects Implanted with an Injectable Calcium Phosphate Bone Cement (Osteopaste)

2017 ◽  
Vol 16 (1) ◽  
Author(s):  
Che Nor Zarida Che Seman ◽  
Zamzuri Zakaria ◽  
Zunariah Buyong ◽  
Mohd Shukrimi Awang ◽  
Ahmad Razali Md Ralib @ Md Raghib
Keyword(s):  
Calcium Phosphate ◽  
Bone Cement ◽  
Bone Tissue ◽  
Bone Repair ◽  
Critical Size ◽  
Healing Process ◽  
Bone Defects ◽  
Calcium Phosphate Bone Cement ◽  
Rabbit Tibia

Introduction: A novel injectable calcium phosphate bone cement (osteopaste) has been developed. Its potential application in orthopaedics as a filler of bone defects has been studied. The biomaterial was composed of tetra-calcium phosphate (TTCP) and tricalcium phosphate (TCP) powder. The aim of the present study was to evaluate the healing process of osteopaste in rabbit tibia. Materials and method: The implantation procedure was carried out on thirty-nine of New Zealand white rabbits. The in vivo bone formation was investigated by either implanting the Osteopaste, Jectos or MIIG – X3 into a critical size defect (CSD) model in the proximal tibial metaphysis. CSD without treatment served as negative control. After 1 day, 6 and 12 weeks, the rabbits were euthanized, the bone were harvested and subjected for analysis. Results: Radiological images and histological sections revealed integration of implants with bone tissue with no signs of graft rejection. There was direct contact between osteopaste material and host bone. The new bone was seen bridging the defect. Conclusion: The result showed that Osteopaste could be a new promising biomaterial for bone repair and has a potential in bone tissue engineering.

scholarly journals Genetically Engineered-MSC Therapies for Non-unions, Delayed Unions and Critical-size Bone Defects

2019 ◽  
Vol 20 (14) ◽  
pp. 3430 ◽  
Author(s):  
Jaime Freitas ◽  
Susana Gomes Santos ◽  
Raquel Madeira Gonçalves ◽  
José Henrique Teixeira ◽  
Mário Adolfo Barbosa ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Animal Studies ◽  
Bone Repair ◽  
Critical Size ◽  
Clinical Problem ◽  
Cell Types ◽  
Bone Defects ◽  
Genetically Engineered ◽  
Beneficial Effects

The normal bone regeneration process is a complex and coordinated series of events involving different cell types and molecules. However, this process is impaired in critical-size/large bone defects, with non-unions or delayed unions remaining a major clinical problem. Novel strategies are needed to aid the current therapeutic approaches. Mesenchymal stem/stromal cells (MSCs) are able to promote bone regeneration. Their beneficial effects can be improved by modulating the expression levels of specific genes with the purpose of stimulating MSC proliferation, osteogenic differentiation or their immunomodulatory capacity. In this context, the genetic engineering of MSCs is expected to further enhance their pro-regenerative properties and accelerate bone healing. Herein, we review the most promising molecular candidates (protein-coding and non-coding transcripts) and discuss the different methodologies to engineer and deliver MSCs, mainly focusing on in vivo animal studies. Considering the potential of the MSC secretome for bone repair, this topic has also been addressed. Furthermore, the promising results of clinical studies using MSC for bone regeneration are discussed. Finally, we debate the advantages and limitations of using MSCs, or genetically-engineered MSCs, and their potential as promoters of bone fracture regeneration/repair.

scholarly journals Osseous Healing in Surgically Prepared Bone Defects Using Different Grafting Materials: An Experimental Study in Pigs

2020 ◽  
Vol 8 (1) ◽  
pp. 7 ◽  
Author(s):  
Savvas Titsinides ◽  
Theodore Karatzas ◽  
Despoina Perrea ◽  
Efstathios Eleftheriadis ◽  
Leonidas Podaropoulos ◽  
...  
Keyword(s):  
Bone Formation ◽  
Bone Repair ◽  
Healing Process ◽  
Bone Substitutes ◽  
Bone Defects ◽  
New Bone Formation ◽  
Post Surgery ◽  
Beta Tricalcium Phosphate ◽  
Close Proximity ◽  
Tissue Specimens

Regeneration of large jaw bone defects still remains a clinical challenge. To avoid incomplete bone repair, bone grafts have been advocated to support the healing process. This study comparatively evaluated new bone formation among a synthetic graft substitute, a human bone derivative, and a bovine xenograft. Materials were placed in 3 out of the 4 bone cavities, while 1 deficit was left empty, serving as a control, in mono-cortical defects, surgically prepared in the porcine calvaria bone. Animals were randomized in 2 groups and euthanized at 8 and 12 weeks. Harvested tissue specimens were qualitatively evaluated by histology. New bone formation was quantitatively measured by histomorphometry. Maximum new bone formation was noticed in defects grafted with beta-tricalcium phosphate b-TCP compared to the other bone substitutes, at 8 and 12 weeks post-surgery. Bovine and human allograft induced less new bone formation compared to empty bone cavity. Histologic analysis revealed that b-TCP was absorbed and substituted significantly, while bovine and human allograft was maintained almost intact in close proximity with new bone. Based on our findings, higher new bone formation was detected in defects filled with b-TCP when compared to bovine and human graft substitutes.

Bone repair using mineral trioxide aggregate combined to a material carrier, associated or not with calcium hydroxide in bone defects

Micron ◽  
2008 ◽  
Vol 39 (7) ◽  
pp. 868-874 ◽  
Author(s):  
Cássio do Nascimento ◽  
João Paulo Mardegan Issa ◽  
Mamie Mizusaki Iyomasa ◽  
Simone Cecílio Hallak Regalo ◽  
Selma Siéssere ◽  
...  
Keyword(s):  
Calcium Hydroxide ◽  
Bone Repair ◽  
Mineral Trioxide Aggregate ◽  
Bone Defects
Sign in / Sign up

Export Citation Format

Share Document