Optical properties of wurtzite GaN grown by low‐pressure metalorganic chemical‐vapor deposition

1996 ◽  
Vol 79 (7) ◽  
pp. 3691-3696 ◽  
Author(s):  
W. Shan ◽  
T. Schmidt ◽  
X. H. Yang ◽  
J. J. Song ◽  
B. Goldenberg
Keyword(s):  
Optical Properties ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Low Pressure ◽  
Metalorganic Chemical

GaInN/GaN Multi-Quantum Well Laser Diodes Grown by Low-Pressure Metalorganic Chemical Vapor Deposition

1998 ◽  
Vol 3 ◽  
Author(s):  
P. Kung ◽  
A. Saxler ◽  
D. Walker ◽  
A. Rybaltowski ◽  
Xiaolong Zhang ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Quantum Well ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Low Pressure ◽  
Threshold Current ◽  
Threshold Current Density ◽  
Multi Quantum Well ◽  
Metalorganic Chemical

We report the growth, fabrication and characterization of GaInN/GaN multi-quantum well lasers grown on (00·1) sapphire substrates by low pressure metalorganic chemical vapor deposition. The threshold current density of a 1800 μm long cavity length laser was 1.4 kA/cm2 with a threshold voltage of 25 V. These lasers exhibited series resistances of 13 and 14 Ω at 300 and 79 K, respectively.

scholarly journals Control of the Polarity and Surface Morphology of GaN Films Deposited on C-Plane Sapphire

1999 ◽  
Vol 4 (S1) ◽  
pp. 634-641 ◽  
Author(s):  
M. Sumiya ◽  
T. Ohnishi ◽  
M. Tanaka ◽  
A. Ohtomo ◽  
M. Kawasaki ◽  
...  
Keyword(s):  
Optical Properties ◽  
Chemical Vapor Deposition ◽  
Surface Morphology ◽  
Buffer Layer ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Ion Scattering ◽  
Ion Scattering Spectroscopy ◽  
Metalorganic Chemical

Control of the polarity of GaN films deposited by metalorganic chemical vapor deposition was achieved by substrate nitridation and subsequent annealing of a buffer layer. The surface morphology and optical properties of 1.2μm GaN films were influenced by the different growth mode due to the polar direction. Coaxial impact collision ion scattering spectroscopy revealed that the polarity composition of a buffer layer on nitrided sapphire varied by annealing in a H2 atmosphere. It was considered that the systematic variation of the surface morphology was caused by the polarity composition of the buffer layer.

Fabrication/Characterization of a Pseudomorphic Ga0.1In0.9P/InP MESFET

1993 ◽  
Vol 300 ◽  
Author(s):  
M. S. Feng ◽  
Y. M. Hsin ◽  
C. H. Wu
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Energy Gap ◽  
Chemical Vapor ◽  
Drain Current ◽  
Low Pressure ◽  
Inp Substrate ◽  
Metalorganic Chemical

ABSTRACTA pseudomorphic Ga0.1In0.9P/InP MESFET grown by low pressure metalorganic chemical vapor deposition(LP-MOCVD) has been fabricated and characterized. The results indicated a transconductance of 66.7 ms/mm and a saturation drain current (Idss) of 55.6 mA have been achieved; furthermore, the Schottky barrier on InGaP as high as 0.67eV can be obtained using Pt2Si as the gate material. For comparison, a conventional InP MESFET with 5μm gate length has also been fabricated on InP epitaxial layer grown by low pressure metalorganic chemical vapor deposition on Fe-doped semi-insulating InP substrate. The transconductance and Idss were found to be 46.7 mS/mm and 43.1 mA at zero gate, respectively, for the depletion mode n-channel MESFET with Au as the gate metal; whereas, for the MESFET using Pt2Si as the gate metal, a transconductance of 40.3 mS/mm and a saturation drain current of 41.1 mA at zero gate bias have been obtained. The results indicated that Ga0.1In0.9P/lnP MESFET has better performance than InP MESFET because of higher energy gap of Ga0.1In0.9P.

Sign in / Sign up

Export Citation Format

Share Document