On the correlation of Young’s modulus and the fracture strength of metallic glasses

2011 ◽  
Vol 109 (3) ◽  
pp. 033515 ◽  
Author(s):  
C. C. Yuan ◽  
X. K. Xi
Keyword(s):  
Young’S Modulus ◽  
Fracture Strength ◽  
Metallic Glasses ◽  
Young's Modulus

Mechanical Properties of Transparent Polycrystalline Silicon Nitride

2006 ◽  
Vol 317-318 ◽  
pp. 305-308 ◽  
Author(s):  
Rak Joo Sung ◽  
Takafumi Kusunose ◽  
Tadachika Nakayama ◽  
Yoon Ho Kim ◽  
Tohru Sekino ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Silicon Nitride ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Polycrystalline Silicon ◽  
Volume Fraction ◽  
Young's Modulus ◽  
Β Phase ◽  
Α Phase

A novel transparent polycrystalline silicon nitride was fabricated by hot-press sintering with MgO and AlN as additives. The mixed powder with 3 wt.% MgO and 9 wt.% AlN was sintered at 1900oC for 1 hour under 30 MPa pressure in a nitrogen gas atmosphere. Transparent polycrystalline silicon nitride was successfully fabricated. The mechanical properties such as density, hardness, young’s modulus, fracture strength and fracture toughness were evaluated. The effect of α/β phase on the mechanical properties of transparent polycrystalline silicon nitride was investigated. The properties were changed depending on the amount of α/β phase. The hardness and Young's modulus increased with increasing the volume fraction of α-phase fraction as a reflection of the higher hardness of α-phase Si3N4. The fracture toughness and fracture strength decreased with decreasing the volume fraction of β-phase Si3N4.

scholarly journals Effect of Defects on the Mechanical and Thermal Properties of Graphene

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 347 ◽  
Author(s):  
Maoyuan Li ◽  
Tianzhengxiong Deng ◽  
Bing Zheng ◽  
Yun Zhang ◽  
Yonggui Liao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Strain Rate ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Fracture Strain ◽  
Young's Modulus ◽  
Pristine Graphene ◽  
Mechanical And Thermal Properties

In this study, the mechanical and thermal properties of graphene were systematically investigated using molecular dynamic simulations. The effects of temperature, strain rate and defect on the mechanical properties, including Young’s modulus, fracture strength and fracture strain, were studied. The results indicate that the Young’s modulus, fracture strength and fracture strain of graphene decreased with the increase of temperature, while the fracture strength of graphene along the zigzag direction was more sensitive to the strain rate than that along armchair direction by calculating the strain rate sensitive index. The mechanical properties were significantly reduced with the existence of defect, which was due to more cracks and local stress concentration points. Besides, the thermal conductivity of graphene followed a power law of λ~L0.28, and decreased monotonously with the increase of defect concentration. Compared with the pristine graphene, the thermal conductivity of defective graphene showed a low temperature-dependent behavior since the phonon scattering caused by defect dominated the thermal properties. In addition, the corresponding underlying mechanisms were analyzed by the stress distribution, fracture structure during the deformation and phonon vibration power spectrum.

The Effect of 555-777 Defect on Mechanical Properties of Graphene Nanoribbon

2021 ◽  
Vol 1032 ◽  
pp. 67-72
Author(s):  
Xiao Fei Ma ◽  
Xue Mei Sun ◽  
Rui Wang ◽  
Shuai Li
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Fracture Strain ◽  
Graphene Nanoribbons ◽  
Young's Modulus ◽  
Simulation Results ◽  
Armchair Graphene Nanoribbons ◽  
Dynamics Simulations ◽  
Zigzag Graphene Nanoribbons

In this study, the effects of 555-777 defect on Young’s modulus, fracture strength and fracture strain of armchair graphene nanoribbons (AGNRs) and zigzag graphene nanoribbons (ZGNRs) were investigated by using Molecular Dynamics simulations under uniaxial tension. The simulation results show that 555-777 defect significantly reduces the fracture strength and fracture strain of AGNRs and ZGNRs, but has little effect on Young's modulus. The influence of 555-777 defect on the mechanical properties of AGNRs is greater than that of ZGNRs. This study provides a better understanding of mechanical properties of graphene nanoribbons.

Sign in / Sign up

Export Citation Format

Share Document