Characterization of metalorganic chemical vapor deposition grown GaAs on Si by means of x‐ray scattering radiography

1991 ◽  
Vol 70 (3) ◽  
pp. 1290-1294 ◽  
Author(s):  
Yoshifumi Suzuki ◽  
Yoshinori Chikaura
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
X Ray ◽  
Gaas On Si ◽  
X Ray Scattering ◽  
Metalorganic Chemical ◽  
Ray Scattering

Real-Time Composition And Thickness Control Techniques In A Metalorganic Chemical Vapor Deposition Process

1995 ◽  
Vol 406 ◽  
Author(s):  
M. S. Gaffneyt ◽  
C. M. Reavesl ◽  
A. L Holmes ◽  
R. S. Smith ◽  
S. P. DenBaars
Keyword(s):  
Chemical Vapor Deposition ◽  
Real Time ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Normal Operation ◽  
Growth Monitoring ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metalorganic Chemical

AbstractMetalorganic chemical vapor deposition (MOCVD) is a process used to manufacture electronic and optoelectronic devices that has traditionally lacked real-time growth monitoring and control. We have developed control strategies that incorporate monitors as real-time control sensors to improve MOCVD growth. An analog control system with an ultrasonic concentration monitor was used to reject bubbler concentration disturbances which exist under normal operation, during the growth of a four-period GaInAs/InP superlattice. Using X-ray diffraction, it was determined that the normally occurring concentration variations led to a wider GaInAs peak in the uncompensated growths as compared to the compensated growths, indicating that closed loop control improved GaInAs composition regulation. In further analysis of the X-ray diffraction curves, superlattice peaks were used as a measure of high crystalline quality. The compensated curve clearly displayed eight orders of satellite peaks, whereas the uncompensated curve shows little evidence of satellite peaks.

Growth of Epitaxial BaTiO3 Thin Films at 600°C by Metalorganic Chemical Vapor Deposition

1994 ◽  
Vol 361 ◽  
Author(s):  
D.L. Kaiser ◽  
M.D. Vaudin ◽  
L.D. Rotter ◽  
Z.L. Wang ◽  
J.P. Cline ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Electron Diffraction ◽  
Harmonic Generation ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Second Harmonic ◽  
Chemical Vapor ◽  
X Ray ◽  
Metalorganic Chemical

ABSTRACTMetalorganic chemical vapor deposition (MOCVD) was used to deposit epitaxial BaTiO3 thin films on (100) MgO substrates at 600°C. The metalorganic precursors employed in the deposition experiments were hydrated Ba(thd)2 (thd = C11H19O2) and titanium isopropoxide. The films were analyzed by means of transmittance spectroscopy, wavelength dispersive x-ray spectrometry, secondary ion mass spectrometry depth profiling, x-ray diffraction, high resolution transmission electron microscopy, selected area electron diffraction, nanoscale energy dispersive x-ray spectrometry and second harmonic generation measurements. There was no evidence for interdiffusion between the film and substrate. The x-ray and electron diffraction studies showed that the films were oriented with the a-axis normal to the substrate surface, whereas second harmonic generation measurements showed that the films had some c-axis character.

Preparation and Characterization of RuOxThin Films by Liquid Delivery Metalorganic Chemical Vapor Deposition

2004 ◽  
Vol 43 (5A) ◽  
pp. 2667-2671 ◽  
Author(s):  
Kyoung-Won Kim ◽  
Nam-Soo Kim ◽  
Hyung-Gyoo Lee ◽  
Yeong-Seuk Kim ◽  
Hee-Jae Kang ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Metalorganic Chemical ◽  
Liquid Delivery

Fabrication/Characterization of a Pseudomorphic Ga0.1In0.9P/InP MESFET

1993 ◽  
Vol 300 ◽  
Author(s):  
M. S. Feng ◽  
Y. M. Hsin ◽  
C. H. Wu
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Energy Gap ◽  
Chemical Vapor ◽  
Drain Current ◽  
Low Pressure ◽  
Inp Substrate ◽  
Metalorganic Chemical

ABSTRACTA pseudomorphic Ga0.1In0.9P/InP MESFET grown by low pressure metalorganic chemical vapor deposition(LP-MOCVD) has been fabricated and characterized. The results indicated a transconductance of 66.7 ms/mm and a saturation drain current (Idss) of 55.6 mA have been achieved; furthermore, the Schottky barrier on InGaP as high as 0.67eV can be obtained using Pt2Si as the gate material. For comparison, a conventional InP MESFET with 5μm gate length has also been fabricated on InP epitaxial layer grown by low pressure metalorganic chemical vapor deposition on Fe-doped semi-insulating InP substrate. The transconductance and Idss were found to be 46.7 mS/mm and 43.1 mA at zero gate, respectively, for the depletion mode n-channel MESFET with Au as the gate metal; whereas, for the MESFET using Pt2Si as the gate metal, a transconductance of 40.3 mS/mm and a saturation drain current of 41.1 mA at zero gate bias have been obtained. The results indicated that Ga0.1In0.9P/lnP MESFET has better performance than InP MESFET because of higher energy gap of Ga0.1In0.9P.

Sign in / Sign up

Export Citation Format

Share Document