Temperature dependence of the dark conductivity and photoconductivity in evaporated thin films of 1,4‐dithioketo‐3,6‐diphenyl‐pyrrolo‐ [3,4‐c]‐pyrrole under a high vacuum or in the atmosphere of oxygen or hydrogen

1989 ◽  
Vol 66 (7) ◽  
pp. 3111-3113 ◽  
Author(s):  
Jin Mizuguchi
Keyword(s):  
Thin Films ◽  
Temperature Dependence ◽  
High Vacuum ◽  
Dark Conductivity

Temperature Dependence of the Electrical Resistivity of Polymerized C60 Thin Films

2002 ◽  
Vol 734 ◽  
Author(s):  
R. Govinthasamy ◽  
J. H. Rhee ◽  
S. C Sharma
Keyword(s):  
Thin Films ◽  
Electrical Resistivity ◽  
Temperature Dependence ◽  
Uv Irradiation ◽  
High Vacuum ◽  
Single Crystal Silicon ◽  
Laser Raman Spectroscopy ◽  
Crystal Silicon ◽  
Laser Raman ◽  
Electrical Resistivities

ABSTRACTHighly conducting thin films of C60 were deposited by thermal evaporation in high vacuum on single crystal silicon substrates. The microstructure of the films was characterized by using Atomic Force Microscopy, and laser Raman spectroscopy. The films were polymerized by uv irradiation. The dc electrical resistivities of the as-deposited and uv-polymerized films were measured as functions of temperature between 295 and 17K by the four-probe technique. We present results on the effects of uv-irradiation on the surface microstructure and the temperature dependence of the electrical resistivity of these films.

Thermoelectric properties of doped and undoped mixed phase hydrogenated amorphous/nanocrystalline silicon thin films

2010 ◽  
Vol 1245 ◽  
Author(s):  
James Kakalios ◽  
Yves Adjallah ◽  
Charlie Blackwell
Keyword(s):  
Thin Films ◽  
Seebeck Coefficient ◽  
Temperature Dependence ◽  
Nanocrystalline Silicon ◽  
Dark Conductivity ◽  
Mixed Phase ◽  
Positive Temperature ◽  
Silicon Thin Films ◽  
Similar Temperature Dependence ◽  
Hydrogenated Amorphous

AbstractThe Seebeck coefficient and dark conductivity for undoped, and n-type doped thin film hydrogenated amorphous silicon (a-Si:H), and mixed-phase films with silicon nanocrystalline inclusions (a/nc-Si:H) are reported. For both undoped a-Si:H and undoped a/nc-Si:H films, the dark conductivity is enhanced by the addition of silicon nanocrystals. The thermopower of the undoped a/nc-Si:H has a lower Seebeck coefficient, and similar temperature dependence, to that observed for undoped a-Si:H. In contrast, the addition of nanoparticles in doped a/nc-Si:H thin films leads to a negative Seebeck coefficient (consistent with n-type doping) with a positive temperature dependence, that is, the Seebeck coefficient becomes larger at higher temperatures. The temperature dependence of the thermopower of the doped a/nc-Si:H is similar to that observed in unhydrogenated a-Si grown by sputtering or following high-temperature annealing of a-Si:H, suggesting that charge transport may occur via hopping in these materials.

Transmission Electron Microscopy of Evaporated Perylene Thin Films

1990 ◽  
Vol 48 (2) ◽  
pp. 336-337
Author(s):  
C. Ewins ◽  
J.R. Fryer
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Molecular Electronics ◽  
High Vacuum ◽  
Amorphous Layer ◽  
Electric Heater ◽  
Transmission Electron ◽  
Polycyclic Aromatic

The preparation of thin films of organic molecules is currently receiving much attention because of the need to produce good quality thin films for molecular electronics. We have produced thin films of the polycyclic aromatic, perylene C10H12 by evaporation under high vacuum onto a potassium chloride (KCl) substrate. The role of substrate temperature in determining the morphology and crystallography of the films was then investigated by transmission electron microscopy (TEM).The substrate studied was the (001) face of a freshly cleaved crystal of KCl. The temperature of the KCl was controlled by an electric heater or a cold finger. The KCl was heated to 200°C under a vacuum of 10-6 torr and allowed to cool to the desired temperature. The perylene was then evaporated over a period of one minute from a molybdenum boat at a distance of 10cm from the KCl. The perylene thin film was then backed with an amorphous layer of carbon and floated onto copper microscope grids.

TEM sample preparation of wear-tested room-temperature pulsed-laser-deposited thin films of MoS2 by ultramicrotomy

1993 ◽  
Vol 51 ◽  
pp. 1118-1119
Author(s):  
Pamela F. Lloyd ◽  
Scott D. Walck
Keyword(s):  
Thin Films ◽  
Sample Preparation ◽  
Room Temperature ◽  
High Vacuum ◽  
Pulsed Laser ◽  
Ultra High Vacuum ◽  
Wear Testing ◽  
Preparation Technique ◽  
Cross Sectional ◽  
Aerospace Applications

Pulsed laser deposition (PLD) is a novel technique for the deposition of tribological thin films. MoS2 is the archetypical solid lubricant material for aerospace applications. It provides a low coefficient of friction from cryogenic temperatures to about 350°C and can be used in ultra high vacuum environments. The TEM is ideally suited for studying the microstructural and tribo-chemical changes that occur during wear. The normal cross sectional TEM sample preparation method does not work well because the material’s lubricity causes the sandwich to separate. Walck et al. deposited MoS2 through a mesh mask which gave suitable results for as-deposited films, but the discontinuous nature of the film is unsuitable for wear-testing. To investigate wear-tested, room temperature (RT) PLD MoS2 films, the sample preparation technique of Heuer and Howitt was adapted.Two 300 run thick films were deposited on single crystal NaCl substrates. One was wear-tested on a ball-on-disk tribometer using a 30 gm load at 150 rpm for one minute, and subsequently coated with a heavy layer of evaporated gold.

scholarly journals The Growth of Semiconductor Thin Films Studied by RHEED

1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price
Keyword(s):  
Thin Films ◽  
Surface Science ◽  
High Vacuum ◽  
High Energy ◽  
Ultra High Vacuum ◽  
Large Area ◽  
Growth Modes ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Recent Developments

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.

The Growth and Characterization of Germanium-Carbon Alloy Thin Films

1992 ◽  
Vol 270 ◽  
Author(s):  
Haojie Yuan ◽  
R. Stanley Williams
Keyword(s):  
Thin Films ◽  
Photoelectron Spectroscopy ◽  
Vacuum Chamber ◽  
Optical Band Gap ◽  
High Vacuum ◽  
Optical Absorption Spectroscopy ◽  
Alloy Thin Film ◽  
New Materials ◽  
X Ray

ABSTRACTThin films of pure germanium-carbon alloys (GexC1−x with x ≈ 0.0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) have been grown on Si(100) and A12O3 (0001) substrates by pulsed laser ablation in a high vacuum chamber. The films were analyzed by x-ray θ-2θ diffraction (XRD), x-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), conductivity measurements and optical absorption spectroscopy. The analyses of these new materials showed that films of all compositions were amorphous, free of contamination and uniform in composition. By changing the film composition, the optical band gap of these semiconducting films was varied from 0.00eV to 0.85eV for x = 0.0 to 1.0 respectively. According to the AES results, the carbon atoms in the Ge-C alloy thin film samples has a bonding configuration that is a mixture of sp2 and sp3 hybridizations.

scholarly journals Strain-Relief Patterns and Kagome Lattice in Self-Assembled C60 Thin Films Grown on Cd(0001)

2021 ◽  
Vol 22 (13) ◽  
pp. 6880
Author(s):  
Zilong Wang ◽  
Minlong Tao ◽  
Daxiao Yang ◽  
Zuo Li ◽  
Mingxia Shi ◽  
...  
Keyword(s):  
Thin Films ◽  
Self Assembly ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Scanning Tunneling ◽  
Kagome Lattice ◽  
Tunneling Microscopy ◽  
Kagomé Lattice ◽  
Temperature Scanning ◽  
C60 Films

We report an ultra-high vacuum low-temperature scanning tunneling microscopy (STM) study of the C60 monolayer grown on Cd(0001). Individual C60 molecules adsorbed on Cd(0001) may exhibit a bright or dim contrast in STM images. When deposited at low temperatures close to 100 K, C60 thin films present a curved structure to release strain due to dominant molecule–substrate interactions. Moreover, edge dislocation appears when two different wavy structures encounter each other, which has seldomly been observed in molecular self-assembly. When growth temperature rose, we found two forms of symmetric kagome lattice superstructures, 2 × 2 and 4 × 4, at room temperature (RT) and 310 K, respectively. The results provide new insight into the growth behavior of C60 films.

Temperature dependence of ZnO thin films grown on Si substrate

2007 ◽  
Vol 19 (8-9) ◽  
pp. 749-754 ◽  
Author(s):  
Y. Y. Kim ◽  
C. H. Ahn ◽  
S. W. Kang ◽  
B. H. Kong ◽  
S. K. Mohanta ◽  
...  
Keyword(s):  
Thin Films ◽  
Temperature Dependence ◽  
Zno Thin Films ◽  
Si Substrate
Sign in / Sign up

Export Citation Format

Share Document