Photoabsorption cross section of XeF2 from 150 to 275 nm by forward‐scattering electron energy‐loss spectroscopy

1987 ◽  
Vol 62 (12) ◽  
pp. 4940-4942 ◽  
Author(s):  
David Spence ◽  
Hiroshi Tanaka ◽  
M. A. Dillon
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Cross Section ◽  
Electron Energy Loss Spectroscopy ◽  
Forward Scattering ◽  
Photoabsorption Cross Section ◽  
Electron Energy Loss

A Poor Man’s Approach to Semi-Quantitative Analysis with Electron Energy Loss Spectroscopy

1980 ◽  
Vol 38 ◽  
pp. 110-111
Author(s):  
M. Isaacson
Keyword(s):  
Quantitative Analysis ◽  
Energy Loss ◽  
Electron Energy ◽  
Cross Section ◽  
Electron Energy Loss Spectroscopy ◽  
Excitation Cross Section ◽  
Incident Electron ◽  
Integral Cross Section ◽  
Image Position ◽  
Electron Energy Loss

In an earlier paper1 it was found that to a good approximation, the efficiency of collection of electrons that had lost energy due to an inner shell excitation could be written as where σE was the total excitation cross-section and σE(θ, Δ) was the integral cross-section for scattering within an angle θ and with an energy loss up to an energy Δ from the excitation edge, EE. We then obtained: where , with P being the momentum of the incident electron of velocity v. The parameter r was due to the assumption that d2σ/dEdΩ∞E−r for energy loss E. In reference 1 it was assumed that r was a constant.

The Influence of Diffracting Conditions on Quantitative Electron Energy Loss Spectroscopy

1980 ◽  
Vol 38 ◽  
pp. 114-115
Author(s):  
N. J. Zaluzec ◽  
J. Hren ◽  
R. W. Carpenter
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Cross Section ◽  
Electron Energy Loss Spectroscopy ◽  
Ionization Cross ◽  
Crystalline Materials ◽  
X Ray ◽  
Scattering Effects ◽  
Electron Energy Loss ◽  
Multiple Scattering Effects

Since many applications of electron energy loss spectroscopy (EELS) deal with microanalysis of crystalline materials it is relevant to consider the effects of diffracting conditions on an EELS measurement. It is well known that anamolous effects can be observed during thin film x-ray microanalysis when crystalline materials are oriented under diffracting conditions near S = 0.1-4 It is not surprizing, therefore, that similar effects will be present in EELS, since this anamolous x-ray generation is a result of variations in the ionization cross-section with crystalline orientation2,3. Furthermore since multiple scattering effects quickly average out these perturbations2 one expects the most pronounced effects under conditions appropriate to EELS.5

Data Acquisition and Handling Unit for a Quantitative Use of Electron Energy Loss Spectroscopy

1977 ◽  
Vol 35 ◽  
pp. 232-233 ◽  
Author(s):  
P. Trebbia ◽  
P. Ballongue ◽  
C. Colliex
Keyword(s):  
Electron Microscope ◽  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Single Channel ◽  
Detection System ◽  
Surface Barrier ◽  
Solid State Detector ◽  
Electrostatic Mirror ◽  
Electron Energy Loss

An effective use of electron energy loss spectroscopy for chemical characterization of selected areas in the electron microscope can only be achieved with the development of quantitative measurements capabilities.The experimental assembly, which is sketched in Fig.l, has therefore been carried out. It comprises four main elements.The analytical transmission electron microscope is a conventional microscope fitted with a Castaing and Henry dispersive unit (magnetic prism and electrostatic mirror). Recent modifications include the improvement of the vacuum in the specimen chamber (below 10-6 torr) and the adaptation of a new electrostatic mirror.The detection system, similar to the one described by Hermann et al (1), is located in a separate chamber below the fluorescent screen which visualizes the energy loss spectrum. Variable apertures select the electrons, which have lost an energy AE within an energy window smaller than 1 eV, in front of a surface barrier solid state detector RTC BPY 52 100 S.Q. The saw tooth signal delivered by a charge sensitive preamplifier (decay time of 5.10-5 S) is amplified, shaped into a gaussian profile through an active filter and counted by a single channel analyser.

Trends in Electron Energy Loss Spectroscopy

1977 ◽  
Vol 35 ◽  
pp. 228-229
Author(s):  
C. Colliex ◽  
P. Trebbia
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Materials Science ◽  
Analytical Technique ◽  
Recent Developments ◽  
Quantitative Results ◽  
Electron Microscopes ◽  
Electron Energy Loss ◽  
Primary Electrons

The physical foundations for the use of electron energy loss spectroscopy towards analytical purposes, seem now rather well established and have been extensively discussed through recent publications. In this brief review we intend only to mention most recent developments in this field, which became available to our knowledge. We derive also some lines of discussion to define more clearly the limits of this analytical technique in materials science problems.The spectral information carried in both low ( 0<ΔE<100eV ) and high ( >100eV ) energy regions of the loss spectrum, is capable to provide quantitative results. Spectrometers have therefore been designed to work with all kinds of electron microscopes and to cover large energy ranges for the detection of inelastically scattered electrons (for instance the L-edge of molybdenum at 2500eV has been measured by van Zuylen with primary electrons of 80 kV). It is rather easy to fix a post-specimen magnetic optics on a STEM, but Crewe has recently underlined that great care should be devoted to optimize the collecting power and the energy resolution of the whole system.

Signal/Noise Ratio and Elemental Detectivity by Eels

1982 ◽  
Vol 40 ◽  
pp. 488-489
Author(s):  
R. F. Egerton
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Elemental Analysis ◽  
Electron Energy Loss Spectroscopy ◽  
Emission Spectroscopy ◽  
X Ray ◽  
Signal Noise ◽  
Characteristic Signal ◽  
Noise Ratio ◽  
Electron Energy Loss

An important parameter governing the sensitivity and accuracy of elemental analysis by electron energy-loss spectroscopy (EELS) or by X-ray emission spectroscopy is the signal/noise ratio of the characteristic signal.

Sign in / Sign up

Export Citation Format

Share Document