MEASUREMENT OF DETONATION VELOCITY FOR A NONIDEAL HETEROGENEOUS EXPLOSIVE IN AXISYMMETRIC AND TWO-DIMENSIONAL GEOMETRIES

Author(s):  
Andrew Higgins ◽  
Mark Elert ◽  
Michael D. Furnish ◽  
William W. Anderson ◽  
William G. Proud ◽  
...  
2015 ◽  
Vol 773 ◽  
pp. 224-266 ◽  
Author(s):  
Scott I. Jackson ◽  
Mark Short

Experiments were conducted to characterize the detonation phase-velocity dependence on charge thickness for two-dimensional detonation in condensed-phase explosive slabs of PBX 9501, PBX 9502 and ANFO. In combination with previous diameter-effect measurements from a cylindrical rate-stick geometry, these data permit examination of the relative scaling of detonation phase velocity between axisymmetric and two-dimensional detonation. We find that the ratio of cylinder radius ($R$) to slab thickness ($T$) at each detonation phase velocity ($D_{0}$) is such that $R(D_{0})/T(D_{0})<1$. The variation in the $R(D_{0})/T(D_{0})$ scaling is investigated with two detonation shock dynamics (DSD) models: a lower-order model relates the normal detonation velocity to local shock curvature, while a higher-order model includes the effect of front acceleration and transverse flow. The experimentally observed $R(D_{0})/T(D_{0})$ (${<}1$) scaling behaviour for PBX 9501 and PBX 9502 is captured by the lower-order DSD theory, revealing that the variation in the scale factor is due to a difference in the slab and axisymmetric components of the curvature along the shock in the cylindrical geometry. The higher-order DSD theory is required to capture the observed $R(D_{0})/T(D_{0})$ (${<}1$) scaling behaviour for ANFO. An asymptotic analysis of the lower-order DSD formulation describes the geometric scaling of the detonation phase velocity between the cylinder and slab geometries as the detonation phase velocity approaches the Chapman–Jouguet value.


2016 ◽  
Author(s):  
G. Di Labbio ◽  
C. B. Kiyanda ◽  
X. Mi ◽  
A. J. Higgins ◽  
N. Nikiforakis ◽  
...  

The complex, dynamic shock-detonation structure formed by the glancing interaction of a primary detonation with a secondary explosive is studied by using time-dependent two-dimensional simulations and related experiments. The materials considered in the simulations are stoichiometric and lean mixtures of hydrogen and oxygen diluted with argon. Related experiments have used undiluted hydrogen and oxygen as well as other gases. For the conditions simulated: (a) the primary mixture is stoichiometric and the secondary inert; (b) both the primary and secondary mixtures are the same and stoichiometric; (c) the primary mixture is lean and the secondary is stoichiometric; and (d) the primary mixture is stoichiometric and the secondary is lean. In addition, for cases (b) and (d) , comparisons are made between simulations in which the primary mixture is overdriven and when it is a Chapman-Jouguet detonation. For the overdriven stoichiometric primary detonation interacting with the lean mixture, a complex detonation structure forms and quickly asymptotes to the detonation velocity of the primary mixture. For this same case, but when the primary detonation is initially at Chapman-Jouguet velocity, the detonation appears to die but then reignites due to a series of shock reflections and then propagates as a complex structure. The lowest velocity of the complex structure is always greater than the Chapman-Jouguet velocity of the lean mixture and it increases in time, appearing to approach the Chapman-Jouguet velocity of the stoichiometric mixture. The dynamics of this decay and reignition process are described and discussed in detail.


1966 ◽  
Vol 24 ◽  
pp. 118-119
Author(s):  
Th. Schmidt-Kaler

I should like to give you a very condensed progress report on some spectrophotometric measurements of objective-prism spectra made in collaboration with H. Leicher at Bonn. The procedure used is almost completely automatic. The measurements are made with the help of a semi-automatic fully digitized registering microphotometer constructed by Hög-Hamburg. The reductions are carried out with the aid of a number of interconnected programmes written for the computer IBM 7090, beginning with the output of the photometer in the form of punched cards and ending with the printing-out of the final two-dimensional classifications.


1966 ◽  
Vol 24 ◽  
pp. 3-5
Author(s):  
W. W. Morgan

1. The definition of “normal” stars in spectral classification changes with time; at the time of the publication of theYerkes Spectral Atlasthe term “normal” was applied to stars whose spectra could be fitted smoothly into a two-dimensional array. Thus, at that time, weak-lined spectra (RR Lyrae and HD 140283) would have been considered peculiar. At the present time we would tend to classify such spectra as “normal”—in a more complicated classification scheme which would have a parameter varying with metallic-line intensity within a specific spectral subdivision.


1966 ◽  
Vol 25 ◽  
pp. 46-48 ◽  
Author(s):  
M. Lecar

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.


2000 ◽  
Vol 179 ◽  
pp. 229-232
Author(s):  
Anita Joshi ◽  
Wahab Uddin

AbstractIn this paper we present complete two-dimensional measurements of the observed brightness of the 9th November 1990Hαflare, using a PDS microdensitometer scanner and image processing software MIDAS. The resulting isophotal contour maps, were used to describe morphological-cum-temporal behaviour of the flare and also the kernels of the flare. Correlation of theHαflare with SXR and MW radiations were also studied.


Author(s):  
H.A. Cohen ◽  
T.W. Jeng ◽  
W. Chiu

This tutorial will discuss the methodology of low dose electron diffraction and imaging of crystalline biological objects, the problems of data interpretation for two-dimensional projected density maps of glucose embedded protein crystals, the factors to be considered in combining tilt data from three-dimensional crystals, and finally, the prospects of achieving a high resolution three-dimensional density map of a biological crystal. This methodology will be illustrated using two proteins under investigation in our laboratory, the T4 DNA helix destabilizing protein gp32*I and the crotoxin complex crystal.


Author(s):  
B. Ralph ◽  
A.R. Jones

In all fields of microscopy there is an increasing interest in the quantification of microstructure. This interest may stem from a desire to establish quality control parameters or may have a more fundamental requirement involving the derivation of parameters which partially or completely define the three dimensional nature of the microstructure. This latter categorey of study may arise from an interest in the evolution of microstructure or from a desire to generate detailed property/microstructure relationships. In the more fundamental studies some convolution of two-dimensional data into the third dimension (stereological analysis) will be necessary.In some cases the two-dimensional data may be acquired relatively easily without recourse to automatic data collection and further, it may prove possible to perform the data reduction and analysis relatively easily. In such cases the only recourse to machines may well be in establishing the statistical confidence of the resultant data. Such relatively straightforward studies tend to result from acquiring data on the whole assemblage of features making up the microstructure. In this field data mode, when parameters such as phase volume fraction, mean size etc. are sought, the main case for resorting to automation is in order to perform repetitive analyses since each analysis is relatively easily performed.


Author(s):  
J. A. Korbonski ◽  
L. E. Murr

Comparison of recovery rates in materials deformed by a unidimensional and two dimensional strains at strain rates in excess of 104 sec.−1 was performed on AISI 304 Stainless Steel. A number of unidirectionally strained foil samples were deformed by shock waves at graduated pressure levels as described by Murr and Grace. The two dimensionally strained foil samples were obtained from radially expanded cylinders by a constant shock pressure pulse and graduated strain as described by Foitz, et al.


Sign in / Sign up

Export Citation Format

Share Document