Shear properties of polarized PVF2 film studied by the piezoelectric resonance method

1979 ◽  
Vol 50 (8) ◽  
pp. 5511 ◽  
Author(s):  
B. A. Auld ◽  
J. J. Gagnepain
2011 ◽  
Vol 317-319 ◽  
pp. 992-995
Author(s):  
Ying Jun Sang ◽  
Xue Liang Huang

In this paper, the piezoelectric ceramic electronic voltage transducer principles is researched, a new internal structure of the measurement system is put forward and the signal processing methods are discussed. On the basis of the analysis of freedom cantilever optical measurement methods for the longitudinal piezoelectric deformation, we proposes the piezoelectric resonance method to detect amplitude of piezoelectric ceramic and cleverly designed mechanical structure, in which the lightweight elastic material is used to support the resonance thin film. This structure overcomes the impact of cantilever longitudinal self-gravity and horizontal friction between cantilever and piezoelectric ceramic, and can improve the deformation measurement accuracy. 10kV 0.05 class transducer voltage measurement accuracy is achieved theoretically.


2020 ◽  
pp. 49-56
Author(s):  
Vitaly V. Volkov ◽  
Michael A. Suslin ◽  
Jamil U. Dumbolov

One of the conditions for ensuring the safety of air transport operation is the quality of aviation fuel refueled in aircraft. Fuel quality control is a multi-parameter task that includes monitoring the free moisture content. Regulatory documents establish the content of free water no more than 0.0015% by weight. It is developed a direct electrometric microwave resonance method for controlling free moisture in aviation fuels, which consists in changing the shape of the water drops by pressing them on a solid surface inside a cylindrical cavity resonator. This can dramatically increase dielectric losses. Analytical and experimental analysis of the proposed method is carried out. The control range from 0,5 to 30 μl of absolute volume of moisture in aviation fuels with a maximum error of not morethan 25 % is justified. The sensitivity of the proposed method for monitoring microwave losses in free moisture drops transformed into a thin layer by pressing is an order of magnitude greater than the sensitivity of the method for monitoring microwave losses in moisture drops on a solid surface in a resonator. The proposed method can be used as a basis for the development of devices for monitoring the free moisture of aviation fuels in the conditions of the airfield and laboratory. The direction of development of the method is shown.


2020 ◽  
pp. 44-49
Author(s):  
I. N. Pavlov

Two optical methods, namely surface plasmon resonance imaging and frustrated total internal reflection, are described in the paper in terms of comparing their sensitivity to change of refractive index of a thin boundary layer of an investigated medium. It is shown that, despite the fact that the theoretically calculated sensitivity is higher for the frustrated total internal reflection method, and the fact that usually in practice the surface plasmon resonance method, on the contrary, is considered more sensitive, under the same experimental conditions both methods show a similar result.


Sign in / Sign up

Export Citation Format

Share Document