Growth rate enhancement by nitrogen in diamond chemical vapor deposition—a catalytic effect

2009 ◽  
Vol 94 (22) ◽  
pp. 224101 ◽  
Author(s):  
S. Dunst ◽  
H. Sternschulte ◽  
M. Schreck
Keyword(s):  
Growth Rate ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Catalytic Effect ◽  
Chemical Vapor ◽  
Rate Enhancement ◽  
Diamond Chemical Vapor Deposition

Influence of Substrate Misorientation on Facet Formation in Selective Area Metalorganic Chemical Vapor Deposition

1996 ◽  
Vol 441 ◽  
Author(s):  
Hyunchol Shin ◽  
Young-Se Kwon
Keyword(s):  
Growth Rate ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Rate Enhancement ◽  
Selective Area ◽  
Influence Of Substrate ◽  
Facet Formation ◽  
Metalorganic Chemical

AbstractWe have investigated the influence of substrate misorientation on facet formation in selective area metalorganic chemical vapor deposition (MOCVD) on GaAs (001) vicinal substrates. Macroscopic steps several hundred angstroms high were generated on the epitaxial layer over triangular voids where the voids were formed using the conditions of the reverse–mesa–shaped facets. AFM observations revealed that the macroscopic steps were formed by the combined effects of the growth rate enhancement and the development of the exact (001) crystallographic surface. Through removing the growth rate enhancement effect from the experiment results, it could be expected that the exact (001) surface developed only on the side for which the (001) surface was exposed because the surface energy of a low index plane was lower than that of a misoriented high index plane.

scholarly journals Unusual Dependence of the Diamond Growth Rate on the Methane Concentration in the Hot Filament Chemical Vapor Deposition Process

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 426
Author(s):  
Byeong-Kwan Song ◽  
Hwan-Young Kim ◽  
Kun-Su Kim ◽  
Jeong-Woo Yang ◽  
Nong-Moon Hwang
Keyword(s):  
Growth Rate ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Methane Concentration ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
Lower Growth ◽  
Filament Temperature ◽  
Diamond Phase ◽  
Hot Filament

Although the growth rate of diamond increased with increasing methane concentration at the filament temperature of 2100 °C during a hot filament chemical vapor deposition (HFCVD), it decreased with increasing methane concentration from 1% CH4 –99% H2 to 3% CH4 –97% H2 at 1900 °C. We investigated this unusual dependence of the growth rate on the methane concentration, which might give insight into the growth mechanism of a diamond. One possibility would be that the high methane concentration increases the non-diamond phase, which is then etched faster by atomic hydrogen, resulting in a decrease in the growth rate with increasing methane concentration. At 3% CH4 –97% H2, the graphite was coated on the hot filament both at 1900 °C and 2100 °C. The graphite coating on the filament decreased the number of electrons emitted from the hot filament. The electron emission at 3% CH4 –97% H2 was 13 times less than that at 1% CH4 –99% H2 at the filament temperature of 1900 °C. The lower number of electrons at 3% CH4 –97% H2 was attributed to the formation of the non-diamond phase, which etched faster than diamond, resulting in a lower growth rate.

Effect of Argon during Diamond Deposition by Hot Filament Chemical Vapor Deposition

2016 ◽  
Vol 869 ◽  
pp. 721-726 ◽  
Author(s):  
Divani C. Barbosa ◽  
Ursula Andréia Mengui ◽  
Mauricio R. Baldan ◽  
Vladimir J. Trava-Airoldi ◽  
Evaldo José Corat
Keyword(s):  
Growth Rate ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
Gas Mixture ◽  
X Ray Diffraction ◽  
Hot Filament ◽  
Argon Content

The effect of argon content upon the growth rate and the properties of diamond thin films grown with different grains sizes are explored. An argon-free and argon-rich gas mixture of methane and hydrogen is used in a hot filament chemical vapor deposition reactor. Characterization of the films is accomplished by scanning electron microscopy, Raman spectroscopy and high-resolution x-ray diffraction. An extensive comparison of the growth rate values and films morphologies obtained in this study with those found in the literature suggests that there are distinct common trends for microcrystalline and nanocrystalline diamond growth, despite a large variation in the gas mixture composition. Included is a discussion of the possible reasons for these observations.

Development of Vertical 3×2〞LPCVD System for Fast Epitaxial Growth on 4H-SiC

2012 ◽  
Vol 717-720 ◽  
pp. 105-108 ◽  
Author(s):  
Wan Shun Zhao ◽  
Guo Sheng Sun ◽  
Hai Lei Wu ◽  
Guo Guo Yan ◽  
Liu Zheng ◽  
...  
Keyword(s):  
Growth Rate ◽  
Chemical Vapor Deposition ◽  
Epitaxial Growth ◽  
Vapor Deposition ◽  
Growth Process ◽  
Chemical Vapor ◽  
Low Pressure ◽  
High Quality ◽  
Pressure Chemical ◽  
Homoepitaxial Layers

A vertical 3×2〞low pressure chemical vapor deposition (LPCVD) system has been developed to realize fast epitaxial growth of 4H-SiC. The epitaxial growth process was optimized and it was found that the growth rate increases with increasing C/Si ratio and tends to saturate when C/Si ratio exceeded 1. Mirror-like thick 4H-SiC homoepitaxial layers are obtained at 1500 °C and C/Si ratio of 0.5 with a growth rate of 25 μm/h. The minimum RMS roughness is 0.20 nm and the FWHM of rocking curves of epilayers grown for 1 hour and 2 hours are 26.2 arcsec and 32.4 arcsec, respectively. These results indicate that high-quality thick 4H-SiC epilayers can be grown successfully on the off-orientation 4H-SiC substrates.

Sign in / Sign up

Export Citation Format

Share Document