scholarly journals Analysis of L21-ordering in full-Heusler Co2FeSi alloy thin films formed by rapid thermal annealing

2009 ◽  
Vol 105 (7) ◽  
pp. 07B109 ◽  
Author(s):  
Yota Takamura ◽  
Ryosho Nakane ◽  
Satoshi Sugahara
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Full Heusler

scholarly journals Epitaxial germanidation of full-Heusler Co2FeGe alloy thin films formed by rapid thermal annealing

2011 ◽  
Vol 109 (7) ◽  
pp. 07B768 ◽  
Author(s):  
Yota Takamura ◽  
Takuya Sakurai ◽  
Ryosho Nakane ◽  
Yusuke Shuto ◽  
Satoshi Sugahara
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Full Heusler

scholarly journals Characterization of half-metallic L21-phase Co2FeSi full-Heusler alloy thin films formed by rapid thermal annealing

2008 ◽  
Vol 103 (7) ◽  
pp. 07D719 ◽  
Author(s):  
Yota Takamura ◽  
Ryosho Nakane ◽  
Hiro Munekata ◽  
Satoshi Sugahara
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Heusler Alloy ◽  
Half Metallic ◽  
Full Heusler

L10 Ordering of FePt Thin Films by Rapid Thermal Annealing

2003 ◽  
Vol 27 (11) ◽  
pp. 1083-1086 ◽  
Author(s):  
H. Ito ◽  
T. Kusunoki ◽  
H. Saito ◽  
S. Ishio
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Fept Thin Films

Effect of rapid thermal annealing on sprayed Cu2SnS3 thin films for solar-cell application

2020 ◽  
Vol 59 (10) ◽  
pp. 105503
Author(s):  
Wafaa Magdy ◽  
Ayaka Kanai ◽  
F. A. Mahmoud ◽  
E. T. El Shenawy ◽  
S. A. Khairy ◽  
...  
Keyword(s):  
Thin Films ◽  
Solar Cell ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Solar Cell Application

Rapid Thermal Annealing Effects in CdTe (111) Thin Films Grown on GaAs (100) Substrates

1996 ◽  
Vol 35 (Part 1, No. 8) ◽  
pp. 4220-4224 ◽  
Author(s):  
M. D. Kim ◽  
T. W. Kang ◽  
M. S. Han ◽  
T. W. Kim
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Annealing Effects

Rapid Thermal Transformation of A-15 Crystal Structure Metallic Thin Films

1995 ◽  
Vol 387 ◽  
Author(s):  
M. J. O'Keefe ◽  
C. L. Cerny
Keyword(s):  
Crystal Structure ◽  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Physical Vapor Deposition ◽  
Thermal Transformation ◽  
The Body ◽  
Cubic Phase ◽  
Body Centered Cubic ◽  
Body Center Cubic

AbstractPhysical vapor deposition of Group VI elements (Cr, Mo, W) can lead to the formation of a metastable A-15 crystal structure under certain processing conditions. Typically, a thermally induced transformation of the metastable A-15 structure into the equilibrium body centered cubic structure has been accomplished by conventional furnace annealing at T/Tm ≈ 0.3 from tens of minutes to several hours. In this study we report on the use of rapid thermal annealing to transform sputter deposited A- 15 crystal structure tungsten and chromium thin films into body centered cubic films within the same temperature range but at times on the order of one minute. The minimum annealing times and temperatures required for complete transformation of the A-15 phase into the BCC phase varied from sample to sample, indicating that the transformation was dependent on the film characteristics. The electrical resistivity of A-15 Cr and W films was measured before and after rapid thermal annealing and was found to significantly decrease after transformation into the body center cubic phase.

STRUCTURAL CHARACTERISTICS OF (Ba,Sr)TiO3 THIN FILMS BY RAPID THERMAL ANNEALING

2007 ◽  
Vol 14 (01) ◽  
pp. 141-145
Author(s):  
Q. Y. ZHANG ◽  
S. W. JIANG ◽  
Y. R. LI
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Heating Rate ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Rapid Heating ◽  
Structural Characteristics ◽  
High Heating Rate ◽  
Duration Time ◽  
Temperature Heating

The rapid thermal annealing (RTA) process was adapted to crystallize the amorphous ( Ba,Sr ) TiO 3 thin films prepared on Si (111) substrates by RF magnetic sputtering deposition. The effect of annealing temperature, heating rate and duration time on crystallization was studied through X-ray diffraction and atomic force microscopy. The result shows that the crystallinity and grain size were strongly dependent on the temperature, heating rate, and duration time. Higher heating rate leads to smaller grain size. In high heating rate, the grain size shows different dependence of temperature from that of low heating rate. For a heating rate of 50°C/s, the grain size decreased with temperature increasing below 700°C, while after that temperature, the grain size increased slightly with the temperature increasing. At a certain temperature, the crystallinity and surface roughness improved with increase in annealing time, while grain size changed little. The effect of rapid heating rate on the nucleation and grain growth has been discussed, which contributes to the limited grain size of the annealed ( Ba,Sr ) TiO 3 thin films.

Rapid thermal annealing of YBaCuO thin films sputtered on substrates

1990 ◽  
Vol 164-165 ◽  
pp. 359-365 ◽  
Author(s):  
J. Baixeras ◽  
F. Carrie ◽  
F.Hosseini Teherani ◽  
A. Kreisler
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing
Sign in / Sign up

Export Citation Format

Share Document