Assuring the Quality of Test Results in the Field of Nuclear Techniques and Ionizing Radiation. The Practical Implementation of Section 5.9 of the EN ISO∕IEC 17025 Standard

2008 ◽  
Author(s):  
Daniela Cucu ◽  
Mike Woods ◽  
Emanuela Cincu ◽  
Ioana Manea ◽  
Mike Woods
Keyword(s):  
Ionizing Radiation ◽  
Practical Implementation ◽  
Test Results ◽  
Nuclear Techniques

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

Sinonasal effects of external dacryocystorhinostomy

2021 ◽  
pp. 1-4
Author(s):  
H Eyigor ◽  
E A Cetinkaya ◽  
D T Coban ◽  
G Ozturk ◽  
Ö Erdem
Keyword(s):  
Mucociliary Clearance ◽  
Nasal Symptom ◽  
Ciliary Activity ◽  
Test Results ◽  
Saccharine Test ◽  
Significant Difference ◽  
Symptom Scores ◽  
Endoscopic Score ◽  
External Dacryocystorhinostomy

Abstract Objective External dacryocystorhinostomy is thought to cause mucociliary dysfunction by damaging the mucosa, in turn affecting ciliary activity and mucus quality. This study investigated the effect of external dacryocystorhinostomy on sinonasal function. Methods Patients scheduled for unilateral external dacryocystorhinostomy who underwent endoscopic nasal examination and paranasal sinus computed tomography were included in this study. A saccharine test was performed on the planned surgical side and the mucociliary clearance time was determined. The sinonasal quality of life was measured in all patients, pre-operatively and at six months post-operatively, using the Sino-Nasal Outcome Test-22. The Lund–Kennedy endoscopic score was also determined in all patients, both pre- and post-operatively. Results The study comprised 28 patients (22 females and 6 males). A statistically significant difference was found between the pre- and post-operative saccharine test results (p = 0.006), but not between the pre- and post-operative Sino-Nasal Outcome Test-22 scores (p > 0.05). Conclusion This study is one of only a few to investigate the effect of external dacryocystorhinostomy on sinonasal function. The results showed that external dacryocystorhinostomy impairs mucociliary clearance. The surgical procedure is well tolerated and does not significantly change nasal symptom scores.

An improved nonlinear model considering relative velocity for the friction behavior between untwisted glass-fiber tow and roller

2021 ◽  
pp. 004051752110308
Author(s):  
Yang Liu ◽  
Zhong Xiang ◽  
Xiangqin Zhou ◽  
Zhenyu Wu ◽  
Xudong Hu
Keyword(s):  
Friction Coefficient ◽  
Glass Fiber ◽  
Relative Velocity ◽  
Friction Model ◽  
Woven Fabric ◽  
Test Results ◽  
Application Process ◽  
Friction Behavior ◽  
Improved Model

Friction between the tow and tool surface normally happens during the tow production, fabric weaving, and application process and has an important influence on the quality of the woven fabric. Based on this fact, this paper studied the influence of tension and relative velocity on the three kinds of untwisted-glass-fiber tow-on-roller friction with a Capstan-based test setup. Furthermore, an improved nonlinear friction model taking both tension and velocity into account was proposed. According to statistical test results, firstly, the friction coefficient was found to be positively correlated with tension and relative velocity. Secondly, tension and velocity were complementary on the tow-on-roller friction behavior, with neither being superior to the other. Thirdly, an improved model was found to present well the nonlinear characteristics between friction coefficient and tension and velocity, and predicational results of the model were found to agree well with the observations from Capstan tests.

scholarly journals Do Guidelines for the Diagnosis and Monitoring of Diabetes Mellitus Fulfill the Criteria of Evidence-Based Guideline Development?

2008 ◽  
Vol 54 (11) ◽  
pp. 1872-1882 ◽  
Author(s):  
Eva Nagy ◽  
Joseph Watine ◽  
Peter S Bunting ◽  
Rita Onody ◽  
Wytze P Oosterhuis ◽  
...  
Keyword(s):  
Diabetes Mellitus ◽  
Methodological Quality ◽  
Guideline Development ◽  
Evidence Based ◽  
Test Results ◽  
Time Period ◽  
Therapeutic Guidelines ◽  
Therapeutic Recommendations ◽  
Evidence Based Guideline

Abstract Background: Although the methodological quality of therapeutic guidelines (GLs) has been criticized, little is known regarding the quality of GLs that make diagnostic recommendations. Therefore, we assessed the methodological quality of GLs providing diagnostic recommendations for managing diabetes mellitus (DM) and explored several reasons for differences in quality across these GLs. Methods: After systematic searches of published and electronic resources dated between 1999 and 2007, 26 DM GLs, published in English, were selected and scored for methodological quality using the AGREE Instrument. Subgroup analyses were performed based on the source, scope, length, origin, and date and type of publication of GLs. Using a checklist, we collected laboratory-specific items within GLs thought to be important for interpretation of test results. Results: The 26 diagnostic GLs had significant shortcomings in methodological quality according to the AGREE criteria. GLs from agencies that had clear procedures for GL development, were longer than 50 pages, or were published in electronic databases were of higher quality. Diagnostic GLs contained more preanalytical or analytical information than combined (i.e., diagnostic and therapeutic) recommendations, but the overall quality was not significantly different. The quality of GLs did not show much improvement over the time period investigated. Conclusions: The methodological shortcomings of diagnostic GLs in DM raise questions regarding the validity of recommendations in these documents that may affect their implementation in practice. Our results suggest the need for standardization of GL terminology and for higher-quality, systematically developed recommendations based on explicit guideline development and reporting standards in laboratory medicine.

Properties comparison of GaN epilayers deposited under different growth temperatures

2011 ◽  
Vol 19 (1) ◽  
Author(s):  
P. Wang ◽  
H. Yan ◽  
B. Cao ◽  
W. Wei ◽  
Z. Gan ◽  
...  
Keyword(s):  
Growth Temperature ◽  
Structural Characteristics ◽  
Chemical Vapour ◽  
Optimal Growth ◽  
Good Method ◽  
Test Results ◽  
Temperature Deposition ◽  
Metalorganic Chemical Vapour Deposition ◽  
Gan Film

AbstractUndoped GaN epilayers were grown on c-plane sapphire substrates under different growth temperatures by metalorganic chemical vapour deposition (MOCVD). The optical and structural characteristics of these grown samples were studied and compared. It was found that the crystalline quality of GaN film deposited at 1050°C was better that of other samples. Photoluminescence spectra showed that the intensities of yellow luminescence band of the samples decreased as the growth temperature increased. All above test results demonstrate that high temperature deposition can serve as a good method for high-quality GaN epilayer growth and there exists an optimal growth temperature.

Constrained Shape Scaling of Trimmed NURBS Surfaces

1999 ◽  
Author(s):  
Pifu Zhang ◽  
Caiming Zhang ◽  
Fuhua (Frank) Cheng
Keyword(s):  
Data Exchange ◽  
Surface Deformation ◽  
Current Data ◽  
Free Form ◽  
Test Results ◽  
Nurbs Surface ◽  
Curvature Distribution ◽  
The Given ◽  
Boundary Curves

Abstract A method to scale and deform a trimmed NURBS surface while holding the shape and size of specific features (trimming curves) unchanged is presented. The new surface is formed by scaling the given surface according to the scaling requirement first; and then attaching the (original) features to the scaled NURBS surface at appropriate locations. The attaching process requires several geometric operations and constrained free-form surface deformation. The resulting surface has the same features as the original surface and same boundary curves as the scaled surface while reflecting the shape and curvature distribution of the scaled surface. This is achieved by minimizing a shape-preserving objective function which covers all the factors in the deformation process such as bending, stretching and spring effects. The resulting surface maintains a NURBS representation and, hence, is compatible with most of the current data-exchange standards. Test results on several car parts with trimming curves are included. The, quality of the resulting surfaces is examined using the highlight line model.

scholarly journals Model of the omni-channel Interaction in the Web 4.0 environment

2018 ◽  
Vol 44 ◽  
pp. 00023
Author(s):  
Anna Chernikova ◽  
Sergey Krasnov ◽  
Sergey Sergeyev
Keyword(s):  
Global Markets ◽  
Entire Group ◽  
Practical Implementation ◽  
Channel Interaction ◽  
Complex Topology ◽  
Scientific Approach ◽  
On Line ◽  
Cloud Servers ◽  
The Web

The practical implementation of the concept “Industry 4.0” entirely depends on the level of coordination between businesses, organizations and the entire group of consumers. The dominating comprehension of such interaction as a net of complex topology where nodes act as objects that have an interface a surface for contacts, results in a neuro-net-concept or the Web 4.0. Within the framework of the Russian national program “National Technological Initiative”, the development of this direction is considered as one of the main priorities. The quality of implementation of the system interaction in this paradigm is greatly influenced by algorithms used in the cloud servers of the nodes included into the structure of the Web 4.0. Besides, operation of businesses in the conditions of global markets will take place in the situation of strict competition and solutions forming the basis of the software have to be based on the scientific approach with the use of the methods of optimization and mathematical models. As the competition in the commercial sphere turned into the contest between the economic efficiency of on-line platforms, this work proposes a particular implementation of the algorithm of omni-channel interaction formed on the basis of a mathematical model.

scholarly journals Enhancement of the perceptive quality of the noisy speech signal by using of DFF-FBC algorithm

2009 ◽  
Vol 22 (3) ◽  
pp. 391-404
Author(s):  
Zoran Milivojevic ◽  
Dragisa Balaneskovic
Keyword(s):  
Speech Signal ◽  
Mean Opinion Score ◽  
Signal Quality ◽  
Test Results ◽  
Frequency Filtering ◽  
Noisy Speech ◽  
Voice Signal ◽  
Opinion Score

This paper presents an algorithm for enhancement of the noisy speech signal quality. This algorithm is based on the dissonant frequency filtering (DFF), F#, B and C# in relation to the frequency of the primary tone C (DFF-FBC algorithm). By means of the subjective Mean Opinion Score (MOS) test, the effect of the enhancement of the speech signal quality was analyzed. The analysis of the MOS test results, presented in the second part of this paper, points out to the enhancement of the noisy speech signal quality in the presence of superimposed noises. Especially good results have been found with Husky Voice signal. .

scholarly journals Enhancing the operational efficiency of quantum random number generators

2021 ◽  
Vol 13 (2) ◽  
pp. 10-18
Author(s):  
Botond L. Márton ◽  
Dóra Istenes ◽  
László Bacsárdi
Keyword(s):  
Random Number ◽  
Statistical Tests ◽  
Practical Implementation ◽  
Random Numbers ◽  
Random Number Generators ◽  
Original Source ◽  
Negative Effect ◽  
Quantum Phenomena ◽  
The Right

Random numbers are of vital importance in today’s world and used for example in many cryptographical protocols to secure the communication over the internet. The generators producing these numbers are Pseudo Random Number Generators (PRNGs) or True Random Number Generators (TRNGs). A subclass of TRNGs are the Quantum based Random Number Generators (QRNGs) whose generation processes are based on quantum phenomena. However, the achievable quality of the numbers generated from a practical implementation can differ from the theoretically possible. To ease this negative effect post-processing can be used, which contains the use of extractors. They extract as much entropy as possible from the original source and produce a new output with better properties. The quality and the different properties of a given output can be measured with the help of statistical tests. In our work we examined the effect of different extractors on two QRNG outputs and found that witg the right extractor we can improve their quality.

Sign in / Sign up

Export Citation Format

Share Document