Magnetic Ion — Lattice Interaction in Rare Earth Antimonides

Author(s):  
E. Bucher ◽  
L. D. Longinotti ◽  
B. Lüthi ◽  
M. E. Mullen
Keyword(s):  
1974 ◽  
Vol 10 (1) ◽  
pp. 186-199 ◽  
Author(s):  
M. E. Mullen ◽  
B. Lüthi ◽  
P. S. Wang ◽  
E. Bucher ◽  
L. D. Longinotti ◽  
...  
Keyword(s):  

2016 ◽  
Vol 4 (3) ◽  
pp. 541-550 ◽  
Author(s):  
M. B. Sanders ◽  
J. W. Krizan ◽  
R. J. Cava

RE3Sb3Zn2O14 (RE = La, Pr, Nd, Sm, Eu, Gd) is a series of novel pyrochlore-related materials with 2D Kagome lattices formed by RE3+ and Sb5+. The rare earth is the only magnetic ion in the structure; this family is therefore an archetype for exploring magnetic frustration on a 2D Kagome lattice.


1986 ◽  
Vol 89 ◽  
Author(s):  
Averous M ◽  
Lombos B.A. ◽  
Bruno A. ◽  
Lascaray J.P. ◽  
Fau C. ◽  
...  

AbstractA semimagnetic semiconductor with rare earth like magnetic ion is studied: Pb1-xGdxTe. Very high Hall mobilities were found up to 107 cm2/V.s. The magnetization is well fitted at 4.2K by a Curie-Weisslaw, with a Gaj's parameter of 1K. The value of JNN' the exchange in a Gd pair deduced from the susceptibility measurements is small, as expected, due to the specific character of Gadolinium (S state and 4f shell): JNN/k = - O.3°K for x = 0.025.


2005 ◽  
Vol 19 (23) ◽  
pp. 3603-3612 ◽  
Author(s):  
PAVOL FARKAŠOVSKÝ ◽  
HANA ČENČARIKOVÁ

The influence of doping on valence and metal-insulator transitions in the spinless Falicov–Kimball model is studied by the well-controlled numerical method. Two types of doping are examined, and namely, the substitution of rare-earth ions by non-magnetic ions that introduce (i) one or (ii) no additional electron (per non-magnetic ion) into the conduction band. It is found that the first type of substitution increases the average f-state occupancy of rare-earth ions, whereas the second type of substitution has the opposite effect. In both cases valence changes are accompanied by a doping induced insulator-metal transition. The results obtained are used to describe valence and metal-insulator transitions in the samarium hexaboride solid solutions.


Author(s):  
N. M. P. Low ◽  
L. E. Brosselard

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.


Author(s):  
T. F. Kelly ◽  
P. J. Lee ◽  
E. E. Hellstrom ◽  
D. C. Larbalestier

Recently there has been much excitement over a new class of high Tc (>30 K) ceramic superconductors of the form A1-xBxCuO4-x, where A is a rare earth and B is from Group II. Unfortunately these materials have only been able to support small transport current densities 1-10 A/cm2. It is very desirable to increase these values by 2 to 3 orders of magnitude for useful high field applications. The reason for these small transport currents is as yet unknown. Evidence has, however, been presented for superconducting clusters on a 50-100 nm scale and on a 1-3 μm scale. We therefore planned a detailed TEM and STEM microanalysis study in order to see whether any evidence for the clusters could be seen.A La1.8Sr0.2Cu04 pellet was cut into 1 mm thick slices from which 3 mm discs were cut. The discs were subsequently mechanically ground to 100 μm total thickness and dimpled to 20 μm thickness at the center.


Author(s):  
G. M. Micha ◽  
L. Zhang

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.


1952 ◽  
Vol 44 (3) ◽  
pp. 442-442
Author(s):  
Frank Spedding ◽  
Harley Wilhelm ◽  
Wayne Keller et al
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document