Direct Melting‐Point Calibration of a High‐Temperature X‐Ray Camera

1963 ◽  
Vol 34 (5) ◽  
pp. 545-550 ◽  
Author(s):  
J. D. Wilkinson ◽  
L. D. Calvert
Keyword(s):  
High Temperature ◽  
Melting Point ◽  
X Ray ◽  
Direct Melting

High-temperature powder x-ray diffraction of yttria to melting point

1999 ◽  
Vol 14 (2) ◽  
pp. 456-459 ◽  
Author(s):  
V. Swamy ◽  
N. A. Dubrovinskaya ◽  
L. S. Dubrovinsky
Keyword(s):  
High Temperature ◽  
Solid State ◽  
Melting Point ◽  
Unit Cell Parameter ◽  
Cell Parameter ◽  
Unit Cell ◽  
Diffraction Spectrum ◽  
X Ray Diffraction ◽  
Thermal Expansion Data ◽  
X Ray

Powder x-ray diffraction data of yttria (Y2O3) were obtained from room temperature to melting point with the thin wire resistance heating technique. A solid-state phase transition was observed at 2512 ± 25 K and melting of the high-uemperature phase at 2705 ± 25 K. Thermal expansion data for α–Y2O3 (C-type) are given for the range 298–2540 K. The unit cell parameter increases nonlinearly, especially just before the solid-state transition. The x-ray diffraction spectrum of the high-temperature phase is consistent with the fluorite-type structure (space group Fm3) with a refined unit cell parameter a = 5.3903(6) Å at 2530 K. The sample recrystallized rapidly above 2540 K, and above 2730 K, all the diffraction lines and spots disappeared from the x-ray diffraction spectrum that suggests complete melting.

scholarly journals MgO Modified with MgF2 as an Electrolyte Immobilizing Agent for the High-Temperature Cells

2019 ◽  
Vol 9 (13) ◽  
pp. 2642 ◽  
Author(s):  
Michał Zieliński ◽  
Angelika Kiderys ◽  
Mariusz Pietrowski ◽  
Bogdan Czajka ◽  
Iwona Tomska-Foralewska ◽  
...  
Keyword(s):  
High Temperature ◽  
Melting Point ◽  
Mechanical Strength ◽  
Nitrogen Adsorption ◽  
Xrd Analysis ◽  
Magnesium Fluoride ◽  
Considerable Decrease ◽  
X Ray ◽  
Mechanical And Electrical Properties ◽  
Molten Electrolyte

Magnesium oxide, generally applied as a filler in high-temperature cells (with an electrolyte melting point above 250 °C), was modified with magnesium fluoride to improve its mechanical and electrical properties. Samples containing 10 and 25 mol.% MgF2 were prepared and calcined at 500, 600, and 700 °C. They were characterized by low-temperature nitrogen adsorption and X-ray diffractometry (XRD). Moreover, the electrolyte absorption, mechanical strength of pellets made of filler and electrolyte, and volume of unfilled spaces were determined. It was shown that the introduction of MgF2 in the amount of 10 and 25 mol.% results in a considerable decrease in the surface area of the initial MgO, which testifies to the covering of MgO by the formed fluoride. However, no new crystalline phases were formed as concluded from the XRD analysis. The pellets consisting of electrolyte and MgF2/MgO filler (the electrolyte + 40 wt.% of the filler) had a higher mechanical strength compared to bare MgO filler. In particular, they outperformed MgO in the ionic conductivity of molten electrolyte. The latter was almost three times as high as that of MgO filler, when the filler containing 25 mol.% MgF2 was employed. The aforementioned properties of MgF2/MgO materials predispose them for use as fillers in high-temperature cells.

The thermal expansion and high temperature transformation of SnS and SnSe*

1979 ◽  
Vol 149 (1-2) ◽  
Author(s):  
Heribert Wiedemeier ◽  
Frank J. Csillag
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Melting Point ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Square Planar ◽  
Orthorhombic Modification ◽  
Temperature Transformation ◽  
Increasing Temperature

AbstractThe thermal expansion of SnS and SnSe has been studied above room temperature up to the melting point of 1163 ± 5K and 1135 ± 5K, respectively, by X-ray diffraction techniques using a 190 mm Unicam high temperature camera. The changes of the lattice parameters indicate that the atomic positions in the (010) plane approach a square planar arrangement with increasing temperature. The transformation of SnS and SnSe from orthorhombic to a pseudotetragonal orthorhombic modification with

scholarly journals High temperature X-ray diffraction study of enstatite up to the melting point.

2002 ◽  
Vol 97 (1) ◽  
pp. 20-31 ◽  
Author(s):  
Dayong JIANG ◽  
Kiyoshi FUJINO ◽  
Naotaka TOMIOKA ◽  
Tomohiko HOSOYA ◽  
Kaushik DAS
Keyword(s):  
High Temperature ◽  
Melting Point ◽  
Diffraction Study ◽  
X Ray Diffraction ◽  
X Ray

X-Ray Study of the BaO-Y2 O3-CuOx System

1987 ◽  
Vol 31 ◽  
pp. 359-370 ◽  
Author(s):  
W. Wong-Ng ◽  
R. S. Roth ◽  
F. Beech ◽  
K. L. Davis
Keyword(s):  
High Temperature ◽  
Melting Point ◽  
Crystallographic Data ◽  
X Ray ◽  
Temperature Range ◽  
Superconductor Material

AbstractTen compounds are found in the Ba0-Y203-CuOx system. High temperature (≈950-1000°C) phases identified as Ba4Y2O7 , Ba2Y2O5 , Ba3Y4O9 , BaY2O4 , Y2Cu2O5 , BaCuO2+x, Ba3YCu2OZ BaY2Cu05 and BazYCu306+x are formed in this temperature range. In addition, a new compound with composition of 2BaO:CuO, which possibly has a melting point below 950°C, was prepared at 850°C. A summary o£ the crystallographic data of these 10 phases is given. In particular, results of x-ray studies pertaining to four compounds, BazYCu306+x, which is currently the most promising high To' superconductor material, Ba2Cu03 , BaY2Cu05 , and Ba3YCu20Z are reviewed.

High temperature X-ray diffraction investigation of an aluminium-silicon-corundum system

2007 ◽  
Vol 2007 (suppl_26) ◽  
pp. 369-374 ◽  
Author(s):  
D. Garipoli ◽  
P. Bergese ◽  
E. Bontempi ◽  
M. Minicucci ◽  
A. Di Cicco ◽  
...  
Keyword(s):  
High Temperature ◽  
X Ray Diffraction ◽  
X Ray

Application of a high temperature chamber for X-ray stress analysis

2005 ◽  
Vol 47 (5) ◽  
pp. 294-298
Author(s):  
Michael H. Ott ◽  
Andreas Kämpfe ◽  
Detlef Löhe
Keyword(s):  
High Temperature ◽  
Stress Analysis ◽  
X Ray

CRM MOLYBDENUM-50 RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Physical Properties ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance

Abstract CRM MOLYBDENUM-50 RHENIUM is a high-melting-point alloy for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mo-11. Producer or source: Chase Brass & Copper Company Inc..

CRM RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance ◽  
Commercially Pure

Abstract CRM RHENIUM is a commercially pure, high-melting-point metal for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Re-1. Producer or source: Chase Brass & Copper Company Inc..

Sign in / Sign up

Export Citation Format

Share Document